Question about 1990 Jeep Wrangler

1 Answer

How do you fill transmission fluid on 1990 jeep wrangler

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

On automatics you fill through the dipstick tube. On stickshift, there is a fill plug on the drivers side of the transmission case.

Posted on Aug 23, 2010

  • 1 more comment 
  • graynor720 Aug 23, 2010

    Is it a star headed bolt?

  • Richard Scordino Aug 24, 2010

    on a stick, it's either a torx (star) or a 1/2" receiver for a ratchet. Either is about half way up the side of the case.

  • John Reyn Dec 02, 2012

    if its the 2.5L manual transmission, the fill plug is on the passenger side, and its 15/16.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the drain and fill plugs on the manual transmission of my 1990 jeep yj it has a 4.2 -6


There should be a plug on the bottom of the transmission to drain and a plug on the side to fill it.
No spark could be a relay or the coil among other things. You may need a shop manual and wiring diagram to troubleshoot the ignition system.

Dec 18, 2012 | 1990 Jeep Wrangler

1 Answer

How much transmission fluid is in a 1999 jeep wrangler


Automatic Transmission, 32RH Initial Fill..........4.1 quarts
Automatic Transmission, 30RH Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
3 speed 32RH..........8.6 quarts
3 speed 30RH..........7 quarts
Manual Transmission, AX-5 2WD..........7.4 pints
Manual Transmission, AX-15 2WD..........6.8 pints
Manual Transmission, AX-15 4WD..........6.8 pints

Feb 14, 2011 | 1999 Jeep Wrangler

2 Answers

What kind of gear oil is required for my 1992 jeep wrangler 5 speed transmission/transfer case and how many quarts will it require


Transmission generally takes a bit less than two quarts, Use 75/90 gear lube in that (in very cold climates you can add a small amount of automatic trans fluid to keep it flowing on cold starts) Transfer case takes a bit over one quart and takes dextron mercon 3. When filling either, fluid is full when on a level surface it begins to come out of the fill hole while filling. When changing either, always make sure you can open the fill plug before draining so you know you can replace what you removed.

Sep 06, 2010 | 1992 Jeep Wrangler

1 Answer

Where is the transmission fluid check on a 1990 jeep wrangler PLEASE


It should be under the hood towards the leftside of the motor.Thanks you for asking and I hope it helps.Please leave me a 4 thumbs up.

Jul 20, 2010 | 1991 Jeep Wrangler

1 Answer

1990 Wrangler: I have a 1990 yj with the 4.2, my question for eve...


Most 90 wranglers from 89 to 95 have an ax15 5 speed transmission in them. The 4 cylinders had an ax5 transmission.

May 17, 2010 | 1990 Jeep Wrangler

1 Answer

Suddenly I have almost no clutch free play left in my 1990 Jeep Wrangler. Goes almost to the floor now. Was working fine yesterday. What's going on?


Sound like your clutch master cylinder has developed a internal leak or maybe even leaking out the back past the seals. Have you checked the brake fluid level in the clutch master cylinder resorvoir it may be low and you have air in the system. Either way you have a leak somwhere in the system and you need to determine where it is. Fill your resorvoir with approved fluid and while some one is pumping your clutch pedal see if you can see where the fluid is leaking from the jeep. Reair or replace as necessary.
good Luck

Sep 25, 2009 | 1990 Jeep Wrangler

1 Answer

Manual transmission fluid leak. Where do I find the fill hole


check passenger side of transmission - it is a 3/8 ext that will fit the bolt - does not really look like a regular fill hole -

Aug 01, 2009 | 2003 Jeep Wrangler

4 Answers

Dont know were to put in new transmission oil on a 1992 Jeep Wrangler


the plug of the transmission of 1992 jeep is under the transmission case .

Apr 20, 2009 | 1992 Jeep Wrangler

Not finding what you are looking for?
1990 Jeep Wrangler Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...