Question about 2002 GMC Sierra C/K1500

1 Answer

No power to rear turn signals - 2002 GMC Sierra C/K1500

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

That sounds like a problem with the turn signal switch or multi-function switch, and if the vehicle also has a tilt steering wheel that the tilt is used often, then check the wires at the connectors to the turn-signal/multi-function switch because they have a tendency to break off there.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How ?I fix the left rear taillight turn signal


Have you checked the socket to see if you have power on that circuit from the turn signal switch ?

Jun 14, 2015 | Cars & Trucks

1 Answer

Left bleaker and break light not working. Turn signal works bleaks faster than right side.


Has the vehicle been in an accident on the left rear side. First check the bulb to be sure it is not defective, trade it out with the side that works properly to test. If the bulb works well then My thought are you may have a shorted wire. The turn signal flasher works by heat build up within the flasher the heat is caused by the load of the bulbs, the load heats the metal spring causing it to open the circuit then as quickly as it cools down the circuit closes again lighting the bulbs.
There is also a possibility of a defect in the turn signal mechanism on the steering column. The turn signal switch on many models does three different things on many models that use the same bulb element / or bulb for brake and turn on rear of vehicle. It controls the circuit for brake light by sending power both left and right side rear when turn signal is in neutral position then when turn signal is in left turn the switch cancels brake light power to left side rear and supplies flasher power to left side while maintaining brake light supply to the right side rear, and so on opposite when the right turn is chosen on turn signal switch. The turn signal indicators on the dash normally run off the same circuit as front turn signal bulb only which is also controlled by turn signal switch. Front has turn signals but no brake light.
I think there is an additional load on the left side rear turn circuit and it could be either a wire that is shorted or the turn signal switch if the same bulb element is used for both functions.
Often times if trailer lighting is connected the flasher will also blink a little faster because of the extra load of additional bulbs.

Feb 15, 2015 | Cars & Trucks

1 Answer

Left turn rear signal no power


NO OUTPUT FROM BCM CONTROL UNIT!!!!U MIGHT NEED TO REPLACE IT

Mar 12, 2014 | 2002 Audi A4

5 Answers

98 chevy lumina Rear window break light works, but rear break lights don't, also right turn don't work?


I can almost 100% guaranty the turn signal switch is the problem. Power for the brake lights starts at the brake switch. power then splits from there and the third brake light gets power directly from the brake switch. Since the turn signal and the brake lights are on the same bulb power for the brake lights is routed through the turn signal switch. the switch depending on what position it is in will allow brake power or turn signal power to there respective left or right brake/turn bulbs.

If you hold your foot on the brake pedal and wiggle the turn signal and or play with the hazard switch the brake lights will almost always intermittently start to work. this will confirm a bad turn signal switch which is pretty common on GM vehicle with this style setup.

Apr 05, 2013 | 1998 Chevrolet Lumina

1 Answer

My right front turn signal doesn't work, I have replaced the bulb the right rear works fine


You would check the socket with a test light or meter to see if you have power and ground. If no power, the turn signal switch would be the next thing to check.

Jan 25, 2013 | 1999 Toyota Corolla

1 Answer

No rear brake lights


If you have power thru the brake light switch, the next component to test is the turn signal switch. If the regular brake lights and turn signals are on the same circuit they both go thru the turn signal switch.

Dec 09, 2012 | 1998 Ford Contour

1 Answer

I changed my turn signal switch and now my rear speakers do not work how can i fix this or does the harness for the turn signal switch hook up with the stereo harness?


No the turn signal is seperate from the stereo,what happen is that accessing the turn signal wire the power to the radio was interrupted, the solution did you blow a fuse?Can you push the radio and rear speaker come alive it just something that got interfered with the speaker wire cannot connect to a constant power as a turn signal but must be from radio controls and radio out let only

Apr 23, 2011 | 1997 GMC Jimmy

1 Answer

1989 Cadillac rear lights stay on


It may be a turn hazard module under dash.that is the culprit! The power to the third brake light does not go through the module, but the rear brake lamps power is controlled through this module. I am looking at a drawing of one and it looks like it has two connectors with about five wires in one and six in the other. It has some cooling fins on it also.

May 30, 2009 | 1989 Cadillac Brougham

1 Answer

Turn signal sometimes flashes both rear turning lights


I would check the flasher due to the fact that is where power is being sent to to send out intermit voltage to the rear lamps. check for open or groundin wires

Dec 10, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...