Question about 2006 Chevrolet Silverado

1 Answer

2006 Chevrolet 1500 . mechanic said computer shows rt front abs sensor bad. How do i replace it ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Sensor will be part of hub bearing assembly, remove brake caliper, brake rotor will slide off, on back of hub bearing will be three bolt's, remove bolt's, disconnect ABS harness, and hub bearing should come off, some time's will have to used a harmmer to knock it out due to rust.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4 wheel will not work. the selector switch will show it is in but front tires will not engage No messages on control center


Search Results

    4WD Transfer Case Position Sensor/Selector ... - RepairPal

    repairpal.com > Problems > Chevrolet > Tahoe
    Service 4WD Message May be Displayed on Chevrolet Tahoe. The 4WD transfer .... I had a similar problem with 4 wheel drive selector switch. When I select 4 ...

    4WD Transfer Case Position Sensor/Selector ... - RepairPal

    repairpal.com > Problems > Chevrolet > Suburban 1500
    Service 4WD Message May be Displayed on Chevrolet Suburban 1500 ... When in 4 wheel , it will not in engage sometimes and message comes on to service 4 wheeldrive. ... I replaced the 4wd transfer switch in 2007 and now again it is not working, this would be the ... 2008 Chevrolet Suburban 1500- 4WD156,000Visitor.

    Chevrolet Tahoe Repair: Problems, Cost and Maintenance

    repairpal.com > Cars > Chevrolet
    Having problems with your Chevrolet Tahoe? Learn about common Chevrolet Tahoe problems, recalls and typical maintenance and repair costs. ... ABS Front WheelSpeed Sensors May Fail. Chevrolet Tahoe ... 2008 Chevrolet Tahoe.

Jan 21, 2016 | 2008 Chevrolet Tahoe LTZ

Tip

2006 Chevrolet Silverado 2500 HD Quad Cab ABS kicks in when stopping


Took me a while, but found the issue.
When stopping, sometimes, but does get worse as time goes on... the ABS will kick in for no reason and the brakes seem to let up on one side or the other.
OK, now...this is what I read everywhere. Replace the wheel cylinders, replace brake fluid, replace brake lines, replace pads... blah, blah, blah... I read too much to and know too much to realize that the brake fluid is NOT going to let the ABS kick in at under 4mph...
I checked around with some back yard mechanics... Well guess what... The splines in the drive axles that get read from the ABS sensor get clogged with grease causing the wheel sensor to think that the wheel stopped and then releases the ABS for that wheel. Thus letting the steering wheel slightly turn to the left or right depending on which sensor lets go. It your steering wheel slips to the right, the right axle needs cleaning.

OK, with that, this works!!!!!!
Obviously need to be mechanically inclined at least a little.
Take the wheel off on the side that the ABS is letting go.
Douse the ABS sensor with some sort of penatrent that will allow to soak in and let the ABS sensor to be taken out. If it breaks, you'll need to dig it out somehow or you'll end up replacing the wheel hub, I was lucky.
OK, once you take off the wheel and remove the ABS sensor, take a flash light and look in the hole. You'll see that the grease has filled the grooves making it appear to be solid.
Take a small screwdriver, like the one you get from Snap On or Mac and clean out every groove. This will take some time. You may have to do this one, two or three times around, maybe 20 mins worth.
OK, once this is all cleaned, put the sensor back in, don't overtighten, then the wheel.
You should be good to go, or stop in this case!! :)

I was lucky only the Rt front sensor needed cleaning last year... now about a month ago the left one started to do this. SO, I guess as soon as I get sick of that I'll take care of that one too!

Hope this helps anyone!!

on Jul 12, 2014 | Chevrolet Cars & Trucks

1 Answer

Replaced rear brakes for disk breaks on 2006 chevy 1500 lights comes on abs


check to see that the sensor wires that sense axle rotation are connected. Some are near the caliphers abd read the rotor rotation and in my car with rear drum brakes it is in the axle housing next to the axle bearing. Check that the sensor is compatable for the new application

Jan 14, 2013 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

2006 chevy silverado abs light comes on goes off comes on goes off


Hi...your problem might be coming from your front wheel bearing hubs. They are know to cause this problem as they wear out and eventually have to be replaced.

http://www.autozone.com/autozone/parts/2006-Chevrolet-Silverado-3500-4WD/Wheel-Bearing-Hub-Assembly-Front/_/N-jnpe7Z8kns

If I helped...please rate me...thanks!

Sep 18, 2011 | 2006 Chevrolet Silverado

1 Answer

My ABS light stays on and the 4wd light keeps blinking.


The first thing you need to do is to have the abs computer scanned for codes, the abs may be related to the 4wd problem, by scanning the codes this will give you an idea of the problem, for example they scan it and it reads p1542 rt frt sensor out of spec, this would mean theres a problem with the right front speed sensor, when ever the computer sees a problem it stores a code and turns on the light for whatr ever system fails, hope this helps.

Oct 30, 2010 | 2006 Mazda Tribute

1 Answer

1999 silverado replaced both ABS sensors on front wheels,replaced complete ABS unit. abs light still on?


sometimes when u buy new sensors they come out of the box bad .... ..... u can try to reset ur truck by unpluging your battery for ten minutes if that dont work then try getting someone to plug a diognostic computer up to the truck to find the problem

Oct 13, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

When i apply the brakes the abs engages slightly


You have a wheel sensor starting to go bad.You will need a computer to read the sensors as you drive to be able to find the sensor that is getting lazy and then replace that sensor.The sensor is built into the wheel bearing unless it is the rear sensor which is located in the top of the rear end differental.

Feb 12, 2010 | 2006 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
2006 Chevrolet Silverado Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...