Question about 1995 Chevrolet Blazer

1 Answer

I have a 1995 Chevy Blazer S10. Two Wheel drive, 4.6 Vortec V6/Automatic Trans. Here is my question, and it should be a fun one. Cause I sure know i'm about fed up with it. Going to work one day my Blazer acted like it wanted to run out of gas, but I had plenty. It spit and sputtered and shut off. I was able to crank it and drive it another 15 miles before it shut off again. I replaced the fuel filter and the fuel pump, as well as spark plugs. Figuring it was in the fuel. It cranked up and ran fine until it got hot. When it got hot I could keep it running at 45-55 mph. When I got on it, it would die. It would act like it was running out of fuel. I was told that it was a fuel relay, so I replaced those and it still kept messing up. I replaced a sensor that sits under the distributor cap, it has two plug-ins on it, and a screw hole on either side. That still didnt fix the problem. I am at my wits end here because I dont know what the problem is. It was starting fine then the hotter the engine got, it died. But sometimes it ran fine, sometimes it didnt, and now I cant even get it to crank. Any ideas whould be so helpful. Thank you.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

First get it to crank, replace part of the fuel line with a clear plastic one, and install a fuel guage, fuel pressure shoud stay steady and no air bubbles should be visible, if all is good have a real time scanner installed to monitor sensors and actuators, good luck

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1997 Chevy s10 blazer with a 4.3 v6 will a 1998 Chevy s10 blazer 4.3 v6 interchange


they should swap just fine. 1996 and on are interchangeable. 1995 could go either way. 1994 and older are interchangeable.

Apr 23, 2016 | Chevrolet S 10 Cars & Trucks

1 Answer

I have a 2003 Chevy blazer with a 4.3 vortec motor it has a small leaking head gasket how long can I drive it until I have the money to fix it.


Troubleshooting a Blown Head Gasket (GM 4.3L, 5.0L, 5.7L)

troubleshootmyvehicle.com > GM > 4.3L, 5.0L, 5.7L
Mar 28, 2011 - There are so many ways to test for a blown head gasket on your 4.3L, 5.0L, 5.7L GM van (or mini-van, pick up, SUV) that it can get confusing.

Chevy Blazer Coolant Leak (Intake Manifold) - YouTube

? 4:33
https://www.youtube.com/watch?v=SC4VXdt5wiE
Oct 9, 2013 - Uploaded by eyetotheworld
I have localized a coolant leak on my 2003 Chevy Blazer to thegasket of the intake ... Turns out that this is common among this particular engine both in the v6 & v8 sizes. ... The guy has been generous to detail his projects. ... 98 S10 Vortec V6 4.3 IntakeGasket Replacement Part 1 of 5 - Duration: 18:17. by ...

Chevy 4.3l v6 oil leak issue 2001 Xtreme Blazer - YouTube

? 6:11
https://www.youtube.com/watch?v=Y8Ogd5voIYs
Nov 12, 2011 - Uploaded by smiatacz
This darn little engine just keeps going. ... I have a 2003 chevy blazer and the oil cooler line from the oil filter to ... I have a 95 Chevy s10 v6 vortec 2wd that is slightly dripping oil out of agasket ... I'm having same problem 2001 Chevy Blazer 4x4 (not xtreme) not sure if those same bolts are missing on mine.

Dec 28, 2015 | Cars & Trucks

2 Answers

Our fuel pump stopped working on our 98 Chevy Blazer V6 4.3L Vortec Engine, so we bought a new one. A couple days later (before replacing the fuel pump) it started up and ran but ran crappy. So we did


what did you do (replace it) if you still have a miss you may need to tune it up / make sure the fuel pump you bought is for the right psi for your blazer

Mar 27, 2013 | 1998 Chevrolet Blazer

1 Answer

Need to find the ignition module on my 1995 chevy s10 4.3 litre vortec v6


its under the distributer cap and rotor. its a small black box with wires plugged into either side

Jan 23, 2011 | 1995 Chevrolet Blazer

1 Answer

Will a 2001 4.3 fit a 95 4.3 I have a 2001 Rolled s10 blazer w a 4.3 and an automatic trans will this fit and work in a 1995 s10 blazer that had a 4.3 and an automatic transmission


Yes it will but your going to have to also transplant the ECM. The change off years to the Blazers are 1992 to 1995 and interchangeable, 1995 being the odd ball year for the 4.3, and in 1996 to 2002 are all drive-train interchangeable. Good luck and keep me posted if you have any more questions.

Feb 22, 2010 | 2001 Chevrolet Blazer

2 Answers

1995 S10 BLAZER 4X4 AUTOMATIC Transmission Burbs


It's possible that your transmission and filter has built-up a lot of gunk and deposits and is working overtime to get fluid to circulate through the transmission. The only other thing that can normally be checked without taking the vehicle to a transmission expert is the fluid level. However, I can tell you that I own a 2002 Blazer with a 4.3 L Vortec, and Blazers have always been notorious for having the transmissions go out on them if they are not checked and flushed on a routine basis (I suggest checking and/or flushing every 10-15K miles.). Hopefully this will help to shed some light on your problem. Have a great day!

Nov 23, 2008 | 1996 Chevrolet Blazer

1 Answer

1996 Chevy S10 stalls out 3 times before steady start


check for loose or cracked vacuum lines, and/or the rotor. It may not be making consistant contact.

Oct 08, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...