Question about 1998 Jeep Wrangler

1 Answer

1998 Jeep Wrangler. Airbag light is on and the horn does not work. Have checked, replaced airbag fuses.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

You have a bad "clockspring" inside the steering wheel. A bit complex to write it all out and if I forget anything the bag could deploy in your face while changing it out. You can find detailed instructions for that job in both chilton or haynes manuals.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No horn connection under the airbag


bad fuse maybe i dont no about the horn ther should be a wire in ther some where to Hook up to

Nov 14, 2011 | 1998 Ford Crown Victoria

1 Answer

Recently changed lock cylinder on a 97 jeep wrangler and airbag light came on. Why?


DID YOU REMOVE AIRBAG FUSE OR DISCONNECT NEGATIVE BATTERY CABLE TO DISCHARGE AIRBAG CAPACITOR DISCHARGE BEFORE YOU REPLACE IGNITION SWITCH KEYLOCK CYLINDER. CHECK MAKE SURE YOU INSTALLED AIRBAG FUSE OR IF YOU DID DISCONNECT NEGATIVE BATTERY CABLE.WHEN YOU RECONNECT NEGATIVE BATTERY CABLE.WITH IGNITION SWITCH ON POSITION FOR MINUTE THE AIRBAG LIGHT SHOULD TURN OFF.IF NOT HAVE GARAGE OR DEALERSHIP CODE SCAN AIRBAGS SYSTEM SEE WHAT CAUSE SRS AIRBAG LIGHT TO FLASH ON COULD HAVE FAULT IN SYSTEM..

Nov 08, 2011 | 1997 Jeep Wrangler

1 Answer

I have a 1999 wrangler my horn quit working and my airbag light stays on any suggestions.


my horn quit working on my 99 wrangler...took it to a shop...the part they changed was called a clock switch...very expensive part but it fixed the problem...part was supposedly dealer only part...horn works great now

Sep 16, 2011 | 1999 Jeep Wrangler

1 Answer

I have a '93 jeep cherokee and my horn doesn't work. I've checked the fuse and it's fine but now i don't know where to locate the horn itself to check for disconnections or to replace...


LOOK UNDER THE LOWER AIR DEFLECTOR FROM BELOW THE RADIATOR. IF YOU HOT WIRE CAR HORN AND IT WORKS.YOU HAVE TO REPLACE THE WHOLE AIRBAG IN STEERING WITH HORN CONTROL BUTTONS.YOU NEED TO DISABLE AIRBAG IN STEERING WHEEL WHEN REPLACING AIRBAG AND HORN CONTROL BUTTON PAD.JUST TURN OFF RADIO FIRST, THEN DISCONNECT REMOVE THE NEGATIVE BATTERY CABLE.WAIT 20 MINUTES BEFORE WORKING ON AIRBAG AND HORN PAD IN THE STEERING WHEEL.

Aug 12, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

My horn broke ive been trying to fix it and i think its the relay while looking my fuse box does not have a relay in the abs pump and the abs do i need those relays its a jeep wrangler 1999 sahara


If you often have the top down, it may be the electrical connection between the steering wheel and the steering column. The horn on my '97 wrangler quit working and my mechanic said it was probably due to dirt. All you have to do is remove the airbag and then the steering wheel and you will see a round plastic part that the horn button and airbag plug into. If you aren't getting any electricity to those plugs, that's probably your problem. That plastic piece is what you would need to replace and it should be available at your dealership.

Jun 25, 2010 | 1999 Jeep Wrangler

1 Answer

My 1999 Jeep wrangler Horn is not working the airbag light is on and the back up light are not working. all fuses are good


Hello, I believe you may have a broken clock spring which is located in your steering wheel. Mine did this some time ago and I had it replaced. I am pretty skilled at repair work but I left this to the stealership/mechanic incase they accidentally deploy the airbag in the process of fixing it their money not mine. Good luck and let me know if I am correct or if I can offer any other help.

May 04, 2010 | 1999 Jeep Wrangler

2 Answers

The horne does not work


Faulty clockspring im the forman for a jeep dealership. The clockspring is locked under the D/S airbag. If there is no power going to the horn fuse the problem is most likely the clockspring. hope that helps.

Jul 06, 2009 | 2008 Jeep Wrangler

1 Answer

1998 TJ, airbag light comes on and radio, heater blower, turn


Make sure your replace the ignition switch the mounts on side of steering collum, not the key switch!!!!

Dec 20, 2008 | 1998 Jeep Wrangler

4 Answers

1997 Jeep wrangler


Clock spring mech is prob bad, first easy check is remove airbag 2 8mm bolt from back side of wheel make sure wires are still connected if they are good the clock spring mech is bad you can use a steering wheel puller to remove wheel and clock spring mech just snaps out and has 2 plugs on it, I have 2 if you need one.

Aug 18, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
1998 Jeep Wrangler Logo

Related Topics:

784 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...