Question about 2002 Ford F250 Super Duty SuperCab

Open Question

Cruise control is not working on the steering wheel. I installed a new set of switches on the steering wheel and everytime I push the set button, the horn blows. Took it all back apart re-installed. This time the horn blows all the time when I hook up the negative cable on the battery. Now what to do???

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 200 Answers

SOURCE: SRS light stays on

This is most likely a wiring issue in the steering column.  I advise you not to attempt to repair this on your own unless you are an experienced mechanic.  If you do be very cautious as the airbag wiring runs through there and can be a very dangerous mistake.

Posted on Oct 24, 2008

SOURCE: Dodge stratus horn

Todd, If your Air Bag Light is on and your cruise control does not work. Contact me before doing the test procedure below!

Todd, sense you have the steering wheel cover off, we need to check to see if it will honk when you take the ground wire for the horn and ground it anywhere to a good ground, preferably the ground post from the battery. We know this is always a perfect ground! The wire for the horn will be a single wire all by itself. If it doesn't Honk see below.

Next: Next we want to ground the horn wire coming out of the other side of the steering wheel, this is much harder but will tell us what we need to know.

Let me know what you find!

Posted on Dec 30, 2008

  • 17 Answers

SOURCE: Horn, Steering Wheel, Cruise Control

Replace the Clock spring. It is mounted behind steering wheel. It alows electrical connection while the wheel turns.

Posted on Jan 08, 2009

  • 323 Answers

SOURCE: Horn, cruise control, and radio controls on steering wheel do not work ?

The clockspring behind the steering wheel is possibly defective or unplugged. It is the one and only component that all of your symptoms have in common.

Posted on Apr 27, 2009

emissionwiz
  • 75822 Answers

SOURCE: Horn blows when steering wheel is turned. Is is a short?

this is caused by a defective/shorted rotating ribbon contact under the steering wheel called a clock spring, to replace this part u must disarm the airbag remove it and the steering wheel and then replace the clock spring, this is a dealer only part.

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My horn isn't working on a Chevy equinox but it's a new horn. What could be wrong with it..and my cruise control don't qork. Is it my steering wheel?


Was Cruise Control working before the New Horn was installed? The power supply to the Horn, (input to ground wire) is connected to the Cruise Control Module (CCM). This CCM is wired to the Relay Switch Box located in the Engine Bay. The Relay Box cover will have a Chart indicating what function each Relay coresponds to. Your local autoparts store (AutoZone) can test the Relay Switch, and you'll know (if any Relay) need to be replaced.

The CCM is also wired to the Steering Wheel, but first passes through the Clock Spring Coil, located just behind the Steering Wheel. The Clock Spring allowes for the Function Buttons on the Steering Wheel to have power while Steering Wheel spins.

The Clock Spring can malfunction or break, its rare, but this will cut power to the Function Buttons on Steering Wheel. If ALL the buttons on Steering Wheel dont work, then the Clock Spring is the Culprit. The Coil may need to be replaced.

The Cruise Control Module itself may have failed and also would cause a few or all Steering Wheel Functions to quit working.

But first check the Relay Switch Box and examine the Harness Cables connecting (Steering Wheel--to--CCM--to--Relay Switch Box--to--Battery Supply).

Also if Cruise Control was working before the new Horn was installed and now not working, then most likely the Problem is a bad wire connection somewhere and/or is a faulty Relay.

(Any Questions/comments jtobias1020@gmail.com)

Feb 26, 2017 | Chevrolet Equinox Cars & Trucks

2 Answers

How to test a cruise control sensor


Check for power then check for resistance when a button is pushed. Each button has a different resistance

Jan 01, 2015 | 1993 Nissan Sentra 4 Door

1 Answer

Ford focus cruise control


Once you have turned your cruise control on accelerate to desired speed press SET button on right hand side of steering wheel before lifting foot from accelerator, then remove foot from accelerator. pushing RESUME button will deactivate cruise control without turning it off. Then when clear of traffic push resume again to activate cruise control. It will automatically resume to previous set speed.

Apr 30, 2013 | 2006 Ford Focus

2 Answers

2000 Buick LeSabre's cruise control button won't stay engaged


We had the same problem and ended up replacing the switch. We used a small flat-tip screwdriver and lifted along the edge of the switch. With the switch removed from the steering wheel, we disconnected the wire connector and installed the new switch by reversing the order.

Jun 17, 2010 | 2000 Buick LeSabre

1 Answer

Intermittant cruise control on 2004 Acura MDX


Sounds like it is a senor module out of alignment either for the brake or accelerator. should be somewhere around the upper arm of both, try adjusting them may just be out of alignment is all.

Sep 09, 2009 | 2004 Acura MDX

3 Answers

How do I turn the cruise control on in a 2004 ion?


Use the cruise control on/off switch and set it to ON. Then momentarily hit the set/coast switch and that should do it. I believe everything is located on the steering wheel.

Jul 24, 2009 | 2004 Saturn ION

2 Answers

My brother just bought a 2004 Lincoln Town Car Signature.....I helped him find this car and he now tells me that the cruise control does not work.....My guess is that he is trying to set the speed and not...


Turn on the Cruise control ON on left side of steering wheel accelerate to desired speed push set button on right side of steering wheel to turn cruise OFF press off or tap brake pedal

Jul 17, 2009 | 2004 Lincoln Town Car

1 Answer

2002 Honda Accord EX V6 cruise control failure


http://www.handa-accessories.com/accord/accswc.jpg

So after you push the button and then press the set button in the steering wheel it does not get into cruise control ? It sounds like a minor electrical problem. If you have warranty still I think the dealership should fix it for free.

Sorry i have not been able to help you.

Jan 02, 2009 | 2002 Honda Accord

2 Answers

Cruise control won't engage


most likely the clock spring is not the problem because when u push the button the dash light cruise comes on.wich means that you do not have an open circuit.with a light tester check to see if you are getting power to the cruise control servo.if you are then replace it.if no power you will need a new cruise control stick on the steering column.

Dec 06, 2008 | 1999 Volvo S80

1 Answer

Cruise control on 99 taurus


check your on and off button at the steering wheel.
use a multi-meter set in the ohm postion and see if there is conectivity as you push each button. you will have to take the button off the steering wheel but it will take
just a few minites. while your at it you can check the right side also.
the set-resume-coast.

Jun 15, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...