Question about 1995 Chevrolet Camaro

1 Answer

My camraros temperature keeps rising past the maxx hottness for my car on the gage and the check gages light keeps poppin up. I put coolant in because it was low but it didnt do anything. also the steeringwheal got super stiff while turning. any idea what could be wrong

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Check the cooling fans and the corresponding relays

Posted on Sep 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TEMP GAGE JUST QUIT , AUTO ZONE PUT SCANNER ON IT CODES P0480 AND P0116 CAME UP , GOING TO change the temp gage sender , but i think something else is wrong , find out after i change tsu ,


code p 0480 refers to engine coolant blower motor 1 ---circuit malfunction=== causes ---wiring ---engine coolant blower motor ---ECM
code p 0116 refers to engine coolant temperature (ECT) sensor ---range b/performance problem ====causes coolant thermostat---poor connections---wiring---ECT sensor

May 07, 2017 | Cars & Trucks

1 Answer

Engine Temperature Gage at the Instrument Panel not working


Your temp.gauge is probably bad ! Check for voltage at the coolant temp. sender ! You have to check it with the engine running . The red with white stripe should have a voltage the other wire ,yellow with red stripe is ground side ! Instrument panel fuse box fuse # 15 a 10amp fuse powers the gauges ,if your gas gauge works it's not the fuse . The dome lights get there power from an other fuse an circuit ! Did you check the bulb ? Check fuse # 8 IP fuse box , also a 10amp . Check for voltage at the dome light ,switch on !

Aug 13, 2015 | Ford Cars & Trucks

2 Answers

My engine overheating problem is in my 2000 land rover. The fan is running and the electric fan comes on at correct engine temperature. After start up the engine runs normal the temp gage rises slowly to...


the usual suspects are:
stuck shut thermostat
clogged raiator
dead water pump
low coolant level
it's sunday, rovers don't work on sunday.
Then again, maybe its wednesday, rovers take half a day then. 25322555-21syibu3fgwpdxocjnkpw0ib-5-0.jpg

Dec 15, 2014 | Cars & Trucks

1 Answer

Heater runs hot then goes cold


Do you have a temperature gage in your instrument cluster? When the temp goes cold, does the temp gage rise? Check your coolant level both in the radiator and the coolant recovery tank under the hood, and fill as necessary. If that is OK, then check your serpentine belt for wear and/or slippage around the water pump. Lastly, if you have a temp gage and are noticing fluctuations in the reading, you may need to replace your cooling system thermostat. Good luck.

Oct 04, 2013 | 2002 Chevrolet Silverado 1500

1 Answer

What is the check gauges light


CHECK GAGES light (1) indicates a potential engine failure(low oil pressure, low coolant, coolant overheating) has occurred.
· Check gages and shut down engine. Gages should read as follows: Oil pressure 5 to 10 psi (34 to 69 kPa) at idle; Water Temp gage below 230 degrees (110 C).
· Check engine oil level (Para 2-11) if OIL PRESS gage indicates low reading. Check coolant level (Para 2-11) if Water Temp gage indicates high reading. Notify Unit Maintenance if levels are low.

If CHECK ENGINE light (2) is on, check engine oil pressure gage (3) and water temperature gage (4). If both indicate normal, proceed with mission and then notify Unit Maintenance. If either one does not indicate normal, stop engine immediately and notify Unit Maintenance


Oct 16, 2009 | 1999 GMC Jimmy

1 Answer

Temperature gage rises and engine overheats on our honda accord. thermostat has been changed and it is not any better. whats next?


The next thing to do is to observe the car as it idles for 10 minutes to ensure the electric radiator fan is coming on if not replace the fan relay if that doesn't work replace the coolant temp. sensor that activates the relay that activates the fan after that ti can only be the fan itself that is if the fan is not coming on.

Aug 02, 2009 | 1997 Honda Accord

1 Answer

My check gage light is on what do i do help!!!!!!!!!!


A "check gage light" typically indicates a faulty reading on one of the gages located on your instrument cluster. After starting your vehicle, observe your instrument cluster if one of the indicator needles on the instrument cluster remains all the way to the left or "pegs" out all the way to the right, it may be the cause of your fault. The exception is the coolant temperature gage it will take 10 to 15 minutes after which the needle should rise to a normal position. Correcting the "faulty gage light" will depend on which gage is malfunctioning. Once you have figured out which gage is causing the check gage light to illuminate, then we can proceed to correcting the problem causing it.

Feb 21, 2009 | 2002 Ford Explorer

1 Answer

1997 Hyundai Elantra has heat but temp gauge does not rise.


If the coolant is below a certain level, the temperature sensor will not read anything and the temp gauge will not rise. Replace the cap, and check that you have enough coolant in the system. If this does not solve the problem, you will need to test/troubleshoot the coolant temperature sensor.

Jan 17, 2009 | 1998 Hyundai Elantra

1 Answer

Radiator fan not working


Check your thermostat and check to see if the electric motor has power or not may be a damaged wire or a fried fan motor,you can also check the fan motor by running a power lead from your battery.good luck

Oct 31, 2008 | 1992 Pontiac Sunbird

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...