Question about 2008 Toyota Tundra
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to reset brake light
Be sure fluid level is proper. IF the ebrake is stuck on ever so slightly that will cause this problem as well. Theres a small chance that the sending unit in the brake master cylinder is bad. The sole purpose of this is to check fluid level. If the brake fluid resevoir is full, a quick test would be to (with key off) unplug the sending unit into the master cylinder and then start vehicle. This would let you know rather or not this is the issue. Let me know if you need any farther assitance, thank you for using fixya.com
Posted on Sep 29, 2008
To change these pads is simple. You first should wash down the area with brake clean so you don't inhale the dust. Then they are to pins that go through the top of the pads and the caliper. (This Caliper has pistons on bothsides) You them remove the metal clips that hold those two pins. with a needle nose pliers. after removing the clips you will be able to remove the two pins and remove pads. Using the old pads in place you can then push back the piston to make room for the new pads.
Posted on Dec 10, 2008
Your dealer is not lying to you.
All of the Toyota product line with ABS has this phenomenon. What Toyota has done is incorporate "Brake Force Distribution" into the braking system. What that means is there is now a sensor on the brake pedal/brake rod, going to the master cylinder. The sensor measures how FAST you press on the brake pedal. This activates the ABS pump, and supplies more brake fluid, harder, to reduce the time needed, such as a "panic stop"; the pedal travel is much longer than you are used to, because of the way they have to measure the speed of the rod being depressed. In actuality, this system is much better than the old system, as it also prevents wheel drag. It just takes a while to get used to. Really, there is nothing to worry about, I explain this same thing to my customers every week.
I hope this helps you out.
Thanks for choosing FixYa for assistance.
Posted on Mar 05, 2009
I have a 2006 Sequoia which should have the similar if not the exact same brake system. Changing the pad is very easy and straight forward. No special wrenth was involved. Easier than sedans since no worry to damage the brake fluid pipe.
Posted on Jul 11, 2009
SOURCE: toyota tundra 2008 removal radio
There is a hidden screw under the center knob on the heater control. Remove this, and the other 2 srews hidden in the corners of the air registers.
Posted on Oct 08, 2009
Tips for a great answer:
Sep 21, 2014 | 2008 Toyota Tundra
Sep 05, 2014 | 2006 Toyota Tundra
Jan 11, 2013 | 2000 Toyota Tundra
Oct 15, 2012 | Cars & Trucks
Sep 10, 2012 | 2007 Toyota Tundra
Dec 16, 2017 | 2008 Toyota Tundra
May 12, 2009 | 1999 Toyota Corolla
Apr 28, 2009 | 2001 Toyota Sienna
Sep 19, 2008 | 2000 Toyota Tundra
1,836 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: