Question about Chevrolet Malibu

1 Answer

No my 2004 malibu the front right orange cover signal light melts from what seems to be a hot bulb

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Have you checked the turn signal fuses? Please check if correct fuse is installed, if not then install the necessary amperes indicated. If it its then there's a problem with the wiring, usually caused by a grounded wire which needs to be traced thoroughly by an auto electrician for this is a sensitive stuff. Hope this helps and thank you for using FixYa!

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front driver side turning signal lamp will not work then works. Looks like both side are heating up to much and melting lenes ? Changed bulb works but still getting to hot?


Double check to make sure you have the right bulbs in them,some bulbs may look exactly alike but one uses more amps then the other.If they are correct try cleaning out the sockets with elec. cleaner and then put some new bulb grease in the sockets.

Jun 06, 2012 | 2005 Chevrolet Malibu Maxx

1 Answer

2004 chevy malibu headlight harness


Find out the model of the light bulb you use and go to an auto parts store. Tell them you need a plug for bulb type xyz. Then just cut and splice the wires together, matching which wire goes where from the faulty plug. Should get the part for under $10.

Jan 28, 2012 | Chevrolet Cars & Trucks

2 Answers

2004 Chevy Malibu front right turn signal burns out after one or two times. What is the fix for this?


are you buying the right bulb should be eather 3157 bulb if you use a 3057 they are wrong also make sure they are 12 volt light bulbs your sustem should be a 12. volt system and your alternator puts out apx 14 volts this is not enough to blow out a buld that can take 12.6 + volts you may have other issues

Feb 25, 2010 | 2004 Chevrolet Malibu

1 Answer

I have a problem nobody seems to know the answer to. My daytime running lights get so hot they melt the housing around them. I took it to the dealerhip and they had it all day couldnt find anything. After...


there was a problem with aftermarket bulbs being wrong..check connectors and make sure it has the proper bulbs..see your local dealer for the right bulbs

Dec 22, 2009 | 2004 Chevrolet Malibu Maxx

1 Answer

2004 Chevy Malibu turn signal issues


check the bulb with a test meter and alsof or a feed

Nov 25, 2009 | 2004 Chevrolet Malibu

1 Answer

The front right turn signal on my 2004 Malibu Maxx will not blink


try changing the peanut bulb underneath the main flasher as they should alternate when one is on the other is off & so on..

Sep 10, 2009 | 2005 Chevrolet Malibu Maxx

1 Answer

Steps to replacing right front signal light bulb in 2005 Malibu


Raise hood and remove two hex bolts holding light assembly. You will see three round rubber covers, approximately 4" in diameter. Unscrew the one to the far left, giving access to the signal light bulb. The bulb pulls straight out. Insert new bulb, replace rubber cover, attacht light assembly back to vehicle with hex bolts, close hood, and pat yourself on the back for job well done.

Mar 30, 2009 | 2005 Chevrolet Malibu

1 Answer

Need to change license plate light on 2004 F150


Try turning the socket that holds the bulb to the left and pull it out to get to the bulb some times these get so hot that they start to melt so it might be hard to turn

Mar 13, 2009 | 2004 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...