Question about 2000 Chevrolet Impala
Look at transmission lock adjustment. the steering column is likely preventing the key from turning fully. Place well in park, and observe the column, and manually turn the column piece, for testing..
Posted on Aug 23, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 29, 2017 | Cars & Trucks
Automatic transmission (A/T)
Switched power feeds to the BCM
Electronic brake control module (EBCM)
Electronic ignition module (spark control)
Electronic power steering module (EPS)
Powertrain control module (PCM)
Park neutral position (PNP) switch
Dec 22, 2015 | Cars & Trucks
Apr 05, 2014 | 2002 Toyota RAV4
Aug 12, 2012 | 2003 Chevrolet Impala
he ignition switch generally has four positions: off, accessories, on, and start. Some cars have two off positions, off and lock; one turns off the car, and the other allows the key to be removed from the ignition. When the key is turned to the accessories position, certain accessories, such as the radio, are powered; however, accessories that use too much battery power, such as window motors, remain off in order to prevent the car's battery from being drained. The accessories position uses the least amount of battery power when the engine is not running, which is why drive-in movie theaters recommend that the car be left in theaccessories mode during the movie.
The on position turns on all of the car's systems, including systems such as the fuel pump, because this is the position the ignition switch remains in while the car's engine is running. The start position is spring loaded so that the ignition switch will not remain there when the key is released. When the key is inserted into the ignition switch lock cylinder and turned to the start position, the starter engages; when the key is released, it returns to the on position, cutting power to the starter. This is because the engine runs at speeds that the starter cannot match, meaning that the starter gear must be retracted once the engine is running on its own.
Either the ignition switch or the lock cylinder may fail in a car, but both circumstances have very different symptoms. When the ignition switch fails, generally the electrical wiring or the plastic housing develops problems. The car may not turn on and/or start when this happens. Also, the spring-loaded start position could malfunction, in which case the starter will not engage unless the key is manually turned back to the on position.
When the lock cylinder malfunctions, however, the operation of the key itself will become problematic. If the tumblers become stripped, the lock cylinder may be able to turn with any key, or you may be able to remove the key when the car is on. If the tumblers begin to shift, the lock cylinder may not turn. Sometimes the key can be wiggled until the lock cylinder turns, but it is important to remember that this is only a temporary fix.
Replacing an ignition switch can be tricky business, particularly in newer cars, because of the anti-theft devices used in cars. Once the ignition switch is separated from the back of the lock cylinder, the car can be started with a screwdriver, making it vital that this switch be difficult to get to. It is important to consult a shop manual before attempting this kind of repair, as the anti-theft devices may require special tools; attempting to remove an ignition switch without the proper tools can render the car inoperable.
increase engine horsepower
Jun 02, 2012 | Volkswagen Transporter Cars & Trucks
Dec 12, 2010 | 2002 Dodge Caravan
Nov 18, 2009 | 1996 Dodge Caravan
78 people viewed this question
Usually answered in minutes!