Question about 1983 Isuzu Pickup

1 Answer

The clutch on my 1983 Izusu PUP does not disengage with pedal to the floor - what needs to be done?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 8,267 Answers

Adjust clutch. See instruction here: http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528006283b

I f clutch will not adjust, clutchplate may be worn too far and need replacement.

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 golf clutch pedal went to the floor. Car would not engage any gear. Fixed cable so pedal now feels good but still won't engage I can move gear lever any where, release pedal but nothing happens.


What do you mean when you say you fixed the cable. It sounds like the cable broke and you replaced it. Is that correct. If so, did you adjust the free play in the clutch pedal to the manufacturers specification. If you have not done this correctly the clutch will either not disengage, or no engage properly. From your description it appears as though there is n free play and hence the clutch is staying disengaged even when you release the clutch pedal. If this is the case, then try lengthening the cable until the clutch pedal moves with say 25 mm of free movement before anything happens, and try again.

May 19, 2016 | Cars & Trucks

1 Answer

New clutch installed. No pedal, stays on floor unless I bring it back up with my hand. No resistance.


`Did it bleed, did fluid come out in a steady stream? Isn't there a spring to bring the pedal off the floor?
Check the linkage of the pedal to rod to the clutch master cylinder, make sure that is all together. Any chance the master has an internal leak and won't build hydraulic pressure down at the slave? If you get it bled, then watch the slave operation while someone works the clutch pedal. The piston on the slave should extend and push the clutch fork enough to disengage the clutch.

Jul 19, 2015 | Nissan Cars & Trucks

1 Answer

Need to adjust my clutch on a Fiat Strada


If you look up under the dash, there should be an adjustment, if its not there, then it will be on the other end of your clutch cable.

Dec 04, 2013 | Cars & Trucks

1 Answer

I hauled a trailer about 40 miles and when I went to leave the clutch pedal went to the floor no resistance and wouldn't disengage clutch master cylinder has fluid throwout bearing has been making noi


It sounds like the throw out bearing separated. You will want to change the clutch and pressure plate when you replace the throw out bearing.

Aug 18, 2013 | Cars & Trucks

1 Answer

Clutch would not disengage


IF you have bled the clutch system and managed to get a firm clutch then the clutch plate has been installed back to front and the clutch center is hitting the bolts that hold flywheel onto the crankshaft. If you have no not got a firm predal pressure replace the clutch master cyl

Mar 02, 2013 | 1989 Ford Ranger

1 Answer

Intermittent clutch failure


Either there is low clutch fluid or air in the system. Or the clutch slave cylinder is leaking within itself.

Jul 04, 2017 | Toyota HiAce Cars & Trucks

1 Answer

90 F350/D clutch will not disengage


There is too much free play on the clutch pedal you need to adjust the clutch.An adjustment need to be done.

Feb 06, 2010 | 1990 Ford F350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...