Question about 1988 Ford Crown Victoria

Open Question

Turn table not working - 1988 Ford Crown Victoria

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Kobelco 135SRLC 2002 excavator really leaking around turn table

hydraulic seals at the turn table are worn out ( dirt and other materials)
if the seal surfaces are marked , it will require a major overhaul otherwise replace the seals at the pint of contact

Apr 24, 2017 | Cars & Trucks

1 Answer

Semi truck

Check the turn table mounts are in good condition. Check that the table jaws are not worn and that the pion under the trailer is round and not worn. Check the torque rods and radius rod bushes on the rear diffs are in good condition and the rubber bushings are not flogged out.. The sensation you are experiencing may be the rear axle turning back and forth from loose spring shackles/ suspension mounting points and diff locating radius rods.

Aug 24, 2013 | Cars & Trucks

2 Answers

Truck lockout code on dash

There are no cheat codes, but here are a few tips for playing: # To pick up the check and clean up the table in one move, double click the table. Seniors and Mr. Hot Shot will wait longer in line, so serve the impatient ones first.-----------------------------------------------------------------------------------------
BENZ STAR C3 Super Mb star updated by internet 2012.11 Fit all computer

Jan 17, 2013 | 2004 Chevrolet Silverado

1 Answer

I have a old study table where writing space isn't

Are you any good at carpentry? If so, a couple of right angle brackets on the existing table to carry a piece of board cut to the same width as the existing table to extend it as far as you desire and a couple of legs or a short (upright) board with similar brackets at the other end. If however you're less capable with hand tools then maybe a few besser blocks (Cinder blocks in America) to carry a piece of board the size you wish it to be.

Oct 08, 2012 | Cars & Trucks

1 Answer

My excavator hitachi ex200-1 weak swing and when you swing then stop vibration begin on turn table when i stop to swing,and when i swing and lift cylinder raise,vibration on the turn table will contin

Not sure would need to have a good look ,but i suspect a safety valve isnt closing properly causing thumping within the hydraulic system which is the vibration you can feel,shouldnt cost a lot to repair providing the faulty valve can be located so return to the dealer as they will have a good idea as yours isnt the first to go wrong iam sure

Sep 24, 2012 | Cars & Trucks

1 Answer

My 2001 ford expedition right hand rear turn signal and brake light doesn't work but right front signal works

Multi-function switch,(Wipers turn signals cruise) , this may sound crazy, but if you can get to the screws & remove it, smack the unit on a table top 2-3 times & re-try.
Let me know what happens. This DOES work on all Ford U-Haul trucks!

Jul 12, 2012 | Ford Expedition Cars & Trucks

1 Answer

Rear table on 1998 s class isnt working cant find fuse on chart any suggestions

What exactly is rear table.Or its cable.Which part of car is called "table".-------Please explain.For car related problems,i suggest click the link below :----AC Problem?

All headlights not working?


Transmission problem


Power window problem

Car starting issues?
------------Vehicle wiring diagram?
-----------This will help.Thanks.

Feb 07, 2012 | Cars & Trucks

1 Answer

Table salt in gas tank

the easiest way to do this would be to remove the fuel filter and turn the key on the fuel pump will pump it all out for you. you may have to cycle the key a few times as it will only run for a little while at a time usually about 30 seconds per cycle

May 01, 2009 | 2005 Chrysler Sebring Conv

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides