Question about 1994 Toyota 4Runner

Open Question

Help dont know how to change rear wheel bearings

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 95 Answers

SOURCE: nissan sentra gxe 03 rear wheel hub bearing problem

Easy job ! just rem to get a gear puller for the antilock gear and install same as came off old one Parts around 100$ each apx 1/2 hr each side

Posted on Oct 15, 2008

  • 2 Answers

SOURCE: what torque for rear wheel bearing Ford Focus 2000

Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps

Posted on Jan 27, 2009

  • 2 Answers

SOURCE: how do you change rear wheel bearing on a 2004 nissan sentra

Its a rear wheel bearing on a sentra. Front wheel drive. In regards to landsend.

Posted on Mar 21, 2009

  • 11 Answers

SOURCE: Rear wheel bearing diagram

What year miata?

Posted on Apr 23, 2009

  • 24 Answers

SOURCE: how to change a rear wheel bearing on a 1994 toyota camry

The rear wheel bearing on a toyota camry is replaced by replacing the wheel bearing and hub as a unit. this is a design change as compare to older models with two piece wheel bearings. Scotch drive wheels. Remove rear wheel. Remove rear brake drum. (note: if emergency brakes are applied you will not be able to remove brake drum) Remove dust cap and hub retaining nut. Hub should slide off as unit. Replace hub with new unit. Installation is reverse of removal.

Posted on May 30, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rear wheel bearing 2002 toyota hihlander

On front wheel drive models, the rear hub bearing is an assembly that bolts to the spindle.
Not sure about AllWheelDrive models.

Jun 29, 2012 | 2002 Toyota Highlander

1 Answer

I have a 98 s10 that rides rough when it gets up to speed like it needs wheel bearings, I pulled the bearings apart and they seem fine, but noticed that both sway bar links were broken. I'm not sure if...

the sway bar links need to be replaced, but would not cause a complaint like wheel bearings were bad. You checked the front? so what does the rear axle oil have to do with that? you sure its not tires? if the tires are wearing irregularly, they will make noise. the noise is either front or rear. Dont take anything apart unless you are certain thats where the noise is from. Wheel bearing noise will change pitch if you turn like you are changing lanes or will make noise while turning one way, then will be quiet the other way.

Sep 07, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

I have taken eveything off the rear brakes and hub but cannot remove the main casing that holds the bearings in from the axle..... how do i get it off so i can change it....

dont know what year or model so no 1 if rear wheel drive need to remove the rear cover and remove the c clip so you can remove the rear axle out to get to the axle bearing ---no 2 if a front wheel vehicle the rear hub abd bearing re a one piece unit and u would have to replace the whole unit this is basic on removal need to know year and type of chevy u have to give u a complete answer. as to a complete answer for either there are some in the answer forums of fix-ya good luck

Jan 30, 2011 | Chevrolet Astro Cars & Trucks

2 Answers

Can you please tell me how to change the rear wheel bearings on a 1999 Vauxhall corsa van. The make and model is not correct it didnt have Vauxhall to choose from. Thank you Rob

yes sorry but you know the americans ,they dont do geography and they beleave in flat earth theory ,lose sight of land and the world stops ,yes easy job they are taper bearings on vehicle of this age and easy to change ,hardest part is knocking the bearing paths out ,when i service vehicles and i always take the back drums off to clean and inspect and adjust the auto brake adjuster i always put some engine oil in the dust cap before i refit to keep the grease soft ,anyway dont you know this is a opel not a vauhall -GB doesnt exist anymore across the channel but its a third world religious ethnic state of mohamed .

Jan 03, 2011 | Volkswagen Corrado Cars & Trucks

1 Answer

How to replace rear axle bearings 2004 vw jetta

take off rear hub u have a inner and outter bearing ..change bearing dont forget to pack new bearing well with a GAA Bearing Grease...and install wheel and tighten middle nut till wheel is tight...then back it off enough that wheel turn but not too freely about half a turn back....GL

Aug 30, 2009 | 2004 Volkswagen Jetta

2 Answers

How Do i remove Rear wheel bearing 2005 dodge caravan

raise van take off wheel you must use jackstands or support your van securly its going to rock alot Take off the four bolts located on the back side of the bearing then take out the small bolt from the speed sensor also located in behind the bearing remove the speed sensor. you will need a large mechanics hammer or heavy blunt object. beat the bearing from the back side dont worry about the cog attached you new bearing has one. dont listen to your hanyes or chiltons manuals thanks.

Jun 13, 2009 | 2005 Dodge Caravan

1 Answer

What torque for rear wheel bearing Ford Focus 2000

Can only find out that the hub needs to be tightened to
235 nm Dunno if this helps

Jan 26, 2009 | 2000 Ford Focus

Not finding what you are looking for?
1994 Toyota 4Runner Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides