Question about 2001 Land Rover Discovery Series II

Open Question

Will not shift to four wheel drive low - 2001 Land Rover Discovery Series II

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Hightower971
  • 183 Answers

SOURCE: four wheel drive shifter will not move

Put the transmission into neutral, then allow the vehicle to roll backwards, this will unbind the transfer case, pull on the shifter while rolling. If that doesn't work, then your linkage under the vehicle has something putting it in a bind. look around and make sure it moves around with slack. Enjoy

Posted on Apr 28, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford ranger - Where is the 4x4 actuator located


On the transfer case
Transfer Case - Electronic Shift
The four-wheel drive electronic shift-on-the-fly feature electrically shifts the vehicle transfer case between 2WD, 4WD HIGH, and 4WD LOW. The system mode is selected by the operator through the mode select switch (MSS) on the instrument panel. The operator is informed which mode the system is in by two instrument cluster indicators: one for 4WD HIGH which appears as 4WD, and one for 4WD LOW, which appears as 4WD LOW. Shifts into 4WD HIGH can be made at any speed. When shifting into 4WD HIGH with the vehicle stationary, tooth blockage may occur preventing shift completion. When the vehicle is driven above 8 km/h (5 mph) the shift will complete. When shifting in or out of 4WD LOW, the four-wheel drive (4WD) control module requires that the vehicle speed be less than 5 km/h (3 mph), the brake pedal be applied, and the transmission be in NEUTRAL (automatic transmission) or the clutch pedal be depressed (manual transmission).
The gearmotor encoder assembly is mounted externally on the transfer case. It drives a rotary cam which moves the mode fork and range fork within the transfer case between the 4WD HIGH, 4WD LOW, and 2WD range positions.
The four-wheel drive (4WD) control module controls the gearmotor encoder assembly that shifts between 4WD HIGH, 4WD LOW, and 2WD modes.

Mar 17, 2017 | Ford Cars & Trucks

1 Answer

When drivingtruck in 2 wheel drive the 4 wheel low light will flash and when slow truck down to a stop it will shift into 4 wheel low and will not go back to 2 wheel high


Sometimes the solenoids will stick on the axle neither in 2 or 4 wheel drive, if this problem started when you weren't shifting between two and four wheel drive it is probably the push button switch cluster on your dash going bad

Dec 12, 2010 | 2000 Chevrolet Blazer

1 Answer

I want to know about the power and the winter buttons. I want to know in the snow if I need to use the four wheel drive high or the four wheel drive low. I have a 1998 Honda Passport 4x4 automatic...


Four wheel High is what you need to use in snow. It is similar to your regular driving experience but your speeds should not exceed 45-50 mph. Shift through your normal gears as necessary and drive with appropriate caution. Four wheel High should be used only as long as driving conditions warrant, using it otherwise can cause unnecessary wear on your transmission and drive-train as well as lower fuel economy.

Four wheel low is used for pulling out of a ditch if you are stuck, going through deep mud or rock crawling. Four wheel low will also cause your vehicle to lurch every time you press the gas pedal.

Nov 15, 2010 | 1998 Honda Passport

1 Answer

How to shift a 1998 jeep grand cherokee into 4 wheel drive


Four low is almost never used. I use it on very steep rocky or muddy trails in the woods or to pull someone out of mud or a ditch. Though some will shift standing still it is best do do this while rolling. Four high can be shifted at low speeds of 2 to about 35mph (higher also but not really good idea) Low can only be shifted between 2 to 10mph. If you find yourself stuck and unable to shift because you aren't rolling you can also turn the engine off, engage the transfer case and re-start. That avoids having the gears clashing together. Best rule is if it begins to grind, don't force it.

Jan 31, 2010 | 1998 Jeep Grand Cherokee

3 Answers

Wont shift back from 4x4 low, to 2x2


I also have a 2002 Envoy. Shifting to and from 4wh and 4wa can be done on the fly but shifting to 4wL has to be done stoped and while in neutral. Try that. Otherwise I'm afraid its a new computer for you. Its located under the left rear seat and you need a loan for one.

Sep 05, 2009 | 2002 GMC Envoy

2 Answers

4 wheel drive doesnt work.


Has this Jeep been modified at all?
It sounds like the shifter cable was reinstalled backwards.
Specifically the 4-Low "Not Climbing Well". 4-Low should give you the best torque and hill climbing ability.
Do you feel any "Binding" in the steering wheel (difficult to turn)?
Remember a Jeep uses real driveshafts and differentials to give you 4WD - you cannot engage 4WD or 4-Low on dry hard surfaces. It needs a little bit of slip between the wheels for turns.
Check you're fluids too.

Jul 11, 2009 | 1992 Jeep Wrangler

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

3 Answers

Jeep stuck in low four wheel drive


Put the transmission in neutral, emergency brake off, foot off the brake pedal, now try shifting out of 4 wheel drive low. If that doesn't work, drive forward, and again do the above, trans. in neutral, roll to a stop, foot off brake, try to disengage. What you're probably experiencing is called drive shaft 'wind up', and it is very difficult to disengage, but do the above and it should shift out of 4 low. countrycurt0

Sep 01, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
2001 Land Rover Discovery Series II Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...