Question about 2005 Ford F 350 Super Duty

2 Answers

My 2003 f 350 7.3 wont start in the morning missing out runs better when it warms up but still misses out rebuilt motor an had valves done an same results please help

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

HARD START PROBLEMS WITH A DIESEL ENGINE GLOW PLUGS RELAY FAULT BUT ENGINE MISS COULD BE LOW COMPRESSION OR AIR LEAKS IN THE FUEL SUCTION LINES.HAVE FUEL FILTER REPLACED SEE DOES IT HELP.

Posted on Aug 23, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Ford Master
  • 1,075 Answers

I have rebuilt a lot of engines over the years,so i know it sounds silly but im going to mention a couple of things.fuel is this ok,air intake,exhaust valve at top of pipe going into turbo,but the main thing is the timing i would have my doubts?i know you have checked and rechecked but i have seen engines timed wrong before and being out by a single tooth is enough to stop a engine firing right.especally when you say the engine has a miss when warm i have looked at this questian and am convinced the timing is set wrong if you would come back to me and tell me the result.please rate this answer.adrian,,,,,,,,,,,,

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tiburon 97 cold morning misses cant go pass 2000,3000rpm.idles till warm but still misses


Does it get to operating temperature? look at replacing the coolant thermostat and the engine coolant sensor. Clean the throttle body also. Inside.

Jul 25, 2015 | Hyundai Motor 1997 Tiburon

1 Answer

1978 dodge pickup 360cid . Starts an runs good agter warm up engine starts to miss on 3 cylenders.ive changed plugs, rebuilt carb , check timing, replaced coil , what else can I do .


Probably they lifters are sticking causing timing and firing problems.... I had the same issues and after cleaning all the build up off the valve stems, lifters, and everything, put it back together with a new valve cover gasket it ran great.....

Feb 22, 2015 | Dodge Cars & Trucks

3 Answers

#2 misfire fouled spark plug in sunfire


yes bad leads will be one of the faults
run the motor in the dark raise the bonnet look for sparkle trails
on the leads

coil pack could be faulty

compression test will tell if it is a leaky valve

back fire can be running lean or timing

index-cvxygyvu0vydc25j522ljeey-4-0.png

index-cvxygyvu0vydc25j522ljeey-4-1.jpg

Mar 31, 2017 | 1997 Pontiac Sunfire

2 Answers

1997 Blazer 4.3 has a DTC P0300 only can be driven after warm up,but still misses most of the time. it passed E check when not missing and idle is smooth. have replaced all ignation parts. the EGR valve...


this code indicates multiple miss fire,which is not just one cylinder doing it.if this motor has a vortec motor in it the problem could be the injectors not operating properly or the lines to the injectors may be leaking into the intake causing a rich condition.it could be the egr valve stuck open just a bit causing a vacume leak and rough running.it could even be a problem with the pickup coil in the distributer or a cracked magnet.the ignition module could also cause the problem.

Jun 24, 2011 | 1997 Chevrolet Blazer

3 Answers

Golf gti mk3 2.0l (2E engine code) is missing !


its a valve sticking or a coil breakdown

Jul 09, 2009 | 1994 Volkswagen Golf

2 Answers

2000 silverado 4.8 v8 runs bad when it is cold out side.


Try replacing the coolant temperature sensor for the injection system.

Jan 05, 2009 | 2000 Chevrolet Silverado

1 Answer

Engine has a miss at idle exspecially in the morning


need to pull plugs and crank over in morning and see if water blows out of any plug holes. Sounds like water in cyclender.

Dec 10, 2008 | 2004 Chevrolet Tahoe

1 Answer

Vehicle doesnt start when its cold morning


Replace the spark plugs and the plug wires; use Toyota parts.

Oct 05, 2008 | 1993 Toyota Previa

Not finding what you are looking for?
Cars & Trucks Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...