Question about Ford Explorer

1 Answer

Low beam does not work high beam work 1994 exployer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 2,973 Answers

Both bulbs could not have gone bad simultaneously. Either the dipper switch is faulty or the low beam lead has come off from the switch or on the bulb end. Most likely the lead is the problem.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have no high beam headlight low works fine have already replace mili switch 2000 ford exployer


Have you checked the fuses and the bulbs to make sure they are ok and check that you have a live feed when switched to main beam .

Feb 02, 2015 | 2000 Ford Explorer

1 Answer

All lights work including high beam, but NO low beam. 1994 Capri.


Hi, ther are two elements in each headlight bulb , one for high beam and one for low beam and your low beams are burnt out ,you will have to replace the bulbs to have low beams too , which you can get at the auto parts store, they are not very expensive or difficult to do .

May 24, 2011 | Mercury Capri Cars & Trucks

1 Answer

My low beams dont come on when i turn my lights on but the high beams work


either one?
could be dimmer switch or just both burned out, try jumping high beam wire to low beam plug see if lights work

May 13, 2011 | 1994 Ford Mustang

1 Answer

High beams work but not both low lights do not work?


assuming you have checked the low beam fuses and assuming the fog lights do not work then you either have an defective combo switch or an open between the switch and the headlamp low beam circuit

Sep 15, 2010 | 1994 Honda Civic

2 Answers

The high beams on my 1994 Jeep Cherokee work, but the low beams don't. The fuses seem to be okay. Any ideas what could cause this?


u should start by checking the bulbs, sometimes it is hard to tell your low beam bulbs are bad until they are both out, if they are both good try wiggling the headlight dimmer switch between high and low beam functions to see if the switch is just worn out. if neither of these presents the problem then u may have an electrical issue that should be diagnosed by a technician

Dec 04, 2009 | 1994 Jeep Cherokee

1 Answer

No low beam, high beam and parking lights work


Bad headlight switch that needs replacing

May 23, 2009 | 1994 Hyundai Excel

1 Answer

Right side low beam does not work


the globe is removed by undoing the clip @ the back of the globe quite easy just look and you will see Lindz

Mar 24, 2009 | 1994 Honda Accord

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

1994 Mercedes c280 high beams not working...


headlight relay is under the screwed down portion of the fusebox.

Oct 13, 2008 | 1994 Mercedes-Benz C-Class

1 Answer

High beams not working...


More likely to be the high beam relay if it is affecting both headlights.

Oct 13, 2008 | 1994 Mercedes-Benz C-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...