Question about Toyota Corolla

1 Answer

I need to know how to unlock the axle from the transmission

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 8,582 Answers

The axle is held in by in indent and snap ring. It should come out with a good ****. Make sure to have a pan under the trans in case some fluid leaks out while the shaft is out.

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change axle shaft seal?


The seal is easy compared to the axle removal. It is simply knocked into the transmission housing.

Jun 11, 2015 | 2003 Nissan Altima

2 Answers

Can a 2000 kia sephia transmission be removed without taking the transaxles and exhaust line off?


when in doubt , thank politely and go some where else to an accredited service shop that has experience on your make of vehicle
on assembly the power train ( engine and transmission) is on a stand and the body is lowered down over it and all of the subframe bolts are screwed in
so yes it is possible to remove the power train complete but as that would be the quick way to do it
I suspect that something more sinister is afoot
did you get a detailed explanation of the transmission problem or axle problem or was it just "you need a new " comment

May 01, 2017 | Kia Sephia Cars & Trucks

1 Answer

If pssible, I would like to know how to remove a transmission on a 1996 Saturn. I have taken all of the bolt s that holes' the , transmission together. Also, I have remove the trans axle's. I am...


You will need to remove the axles and the subframe to get the transmission out.you will need to support the engine also so it does not fall when the subframe is removed.

Mar 10, 2011 | 1996 Saturn SL

1 Answer

Amilywanting to know how to change left front axle on a 1990 mercury topaz


tire off pull brake caliper,then center axle nut, pull bolts out of strut pull spindle down so axle can be pulled out of spindle, after that done take big screw driver to trans @ axle inbetween them pop axle away from transmission remove old follow reverse to install make sure new axle seats into transmission just like old one

Aug 15, 2010 | Mercury Topaz Cars & Trucks

1 Answer

I need to Know where the speedometer sensor is on a 1991 chevy cavalier Z24 3.1 mutiport with an Automatic transmission 2WD


The speed sensor for your 1991 Chevy Cavalier Z24 is located on the transmission just inboard of where the passenger side drive axle enters the trans-axle.

Feb 16, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

Car is smoking and I don't know where it is coming from.


IF YOU HAVE WRONG SIZE AXLE SHAFT IT WONT STAY LOCK IN IF IT IS TOO SMALL.IT WILL SPIN INSIDE TRANSMISSION GRINDING AND DAMAGING OUT PUT SHAFT GEAR IN TRANSMISSION WHERE AXLE LOCKS IN PLACE.

Jan 12, 2010 | 2001 Dodge Stratus

3 Answers

Removing front axle 1991 ford escort


do you mean the drive shaft. if so you just need a good lever bar to prise the drive shaft out of the transmission.if you mean you want the drive shaft out of the front wheel hub then you may need a good pller to femove it as it can be very tight on the splines

Apr 22, 2009 | 1995 Ford Escort

1 Answer

Transmission Axles 2005 Mazda 3


mcdevito75, I have heard of 2 different type axles being used on Mazdas, the important thing though is the fluid leak. Have your local repair shop take a look and fix this leak.

Mar 28, 2009 | 2005 Mazda 3

1 Answer

CV Axle removal and installation


The axle should be able to be removed by using a flat ended pry bar tool with a dull flat end. Or possibly a very large flat screw driver. Put the pry bar between the axle and transmission. With light pressure, the axle should pop out of the transmission. The axle just snaps into the transmission. There should be no need or cause to damage the seal because the seal is inset into the transmission. Just watch what you are doing. As far as replacing the seal, I do not know. I have not had to do that yet, and I have replaced both sides with new boots more than once.

Oct 19, 2008 | 1995 Geo Metro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...