Question about 1990 Acura Legend

2 Answers

My front camshaft pulley is not lined up to my timing belt. i moved the pulley a little when i put the timing belt on. its off about 6 or 7 notches. should i start car.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Acura Master
  • 1,075 Answers

No do not start the car,stop and start again,if you try to start the engine you will do about a 1000 dollers worth of damage.take the belt of again and take your time and line the belt up to the last tooth and make sure all the tooth notches are lined perfict if the tensioner is of, then the belt should just slide on with no problem once you are happy all is lined and belt on reliese the tensionar,recheck its to costly to be wrong.please rate this answer thanks.adrian,,,,,,,

Posted on Aug 23, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 8,575 Answers

NO! You have to get the camshaft timed properly or you can damage the engine.

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im looking for the timing marks on a 1988 land cruiser?


what timing? firing or cam and crank?
The crankshaft should have a notch on it's inboard flange to line up with a graduated plate on the engine
The crankshaft pulley on which the timing belt sits has a "button"
When fitting a new timing belt the timing belt should have lines telling you where it lines up with the "button" and then camshaft position where you should see notches in the camshaft pulleys or back plate.
If the cam cover is of the camshafts have dots on their gears.
If you have not got a manual then I'd advise getting one or downloading a pdf version. If you know what your doing but just don't have a manual then put some paint pen marks on everything before you start.

Nov 12, 2011 | Toyota Land Cruiser Cars & Trucks

Tip

Escort 1.9L Timing Belt Replacement


Remove the serpentine belt, remove the lower crankshaft pulley, place a jack under the oil pan and jack up the engine slightly, remove the engine mount (right top). Remove the timing belt cover, loosen the timing belt tensioner and pull tensioner pulley back toward the rear of vehicle. I like to then tighten the tensioner bolt to hold it in this position, remove and replace belt. If you need to put the engine in time then look at the camshaft there is a small arrow in the center, it lines up with a dot on the end of the cylinder head. The lower timing mark is a small metal tip that sticks out from the lower gear, and it lines up with a notch cut into the front cover just behind the lower gear. Once aligned properly put the belt on the lower gear and without turning the lower gear or camshaft gear pull the belt tight up to the cam shaft the cogs in the belt will line up with the grooves, then place the belt around the water pump drive gear and under the tensioner, then push the belt over all gears by hand without turning the engine. Loosen the tensioner bolt and apply a little pressure toward the front of the vehicle and tighten the bolt. Replace everything else previously removed. Engine should start and run normally.

on Aug 10, 2010 | Ford Escort Cars & Trucks

1 Answer

How to set time on 1.9 4c


Remove the serpentine belt, remove the lower crankshaft pulley, place a jack under the oil pan and jack up the engine slightly, remove the engine mount (right top). Remove the timing belt cover, loosen the timing belt tensioner and pull tensioner pulley back toward the rear of vehicle. I like to then tighten the tensioner bolt to hold it in this position, remove and replace belt. If you need to put the engine in time then look at the camshaft there is a small arrow in the center, it lines up with a dot on the end of the cylinder head. The lower timing mark is a small metal tip that sticks out from the lower gear, and it lines up with a notch cut into the front cover just behind the lower gear. Once aligned properly put the belt on the lower gear and without turning the lower gear or camshaft gear pull the belt tight up to the cam shaft the cogs in the belt will line up with the grooves, then place the belt around the water pump drive gear and under the tensioner, then push the belt over all gears by hand without turning the engine. Loosen the tensioner bolt and apply a little pressure toward the front of the vehicle and tighten the bolt. Replace everything else previously removed. Engine should start and run normally.

Feb 03, 2011 | 1995 Ford Escort

1 Answer

Timing belt replacemnt for 1991 Nissan pulsar


1. Disconnect battery.2. make sure the engine is at top dead center(TDC).3. take belts off.4. Remove pulleys,except for the camshaft pulley..5. Remove timing belt cover.At this point you should see the timing belt and also the water pump,if it's not external.I suggest while you have access to the water pump that you replace it.6. loosen timing belt tensioner and and finally remove belt.On the camshaft pulley,there should be a notch,making sure the notch is at the top of the pulley. 7. Tighten the timing belt,but not too tight.7. Installation is reverse of removal.

Oct 02, 2010 | 1990 Nissan Pulsar

1 Answer

I would like a diagram of the 2004 Suzuki forenza timing marks and how to get the belt aroujd the crankshaft is there a way you can give me that information?


from autozone.com


Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative battery cable.
  3. Disconnect the Manifold Air Temperature (MAT) sensor connector.
  4. Disconnect the air cleaner outlet hose from the throttle body.
  5. Disconnect the breather tube from the camshaft cover.
  6. Remove the air cleaner housing bolts.
  7. Remove the air cleaner housing.
  8. Remove the right front wheel.
  9. Remove the right front wheel well splash shield.
  10. Remove the serpentine drive belt.
  11. Remove the crankshaft pulley bolts and the crankshaft pulley.
  12. Remove the right engine mount bracket.
  13. Remove the front timing belt cover bolts.
  14. Remove the front timing belt cover.
  15. Using the crankshaft gear bolt, rotate the crankshaft clockwise until the timing mark on the crankshaft gear is aligned with the notch at the bottom of the rear timing belt cover.

56340db.gif

Fig. Aligning the timing mark on the crankshaft gear with the notch at the bottom of the rear timing belt cover.


7c6bcda.gif

  1. Fig. Aligning the camshaft gears with the notches on the camshaft cover.
  2. Align the camshaft gears with the notch on the camshaft cover.
  3. Remove the timing belt.
  4. Loosen the automatic tensioner bolt. Turn the hex-key tab to relieve belt tension.

To install:
  1. Align the timing mark on the crankshaft gear with the notch on the bottom of the rear timing belt cover.
  2. Align the timing marks on the camshaft gears, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
  3. Install the timing belt.
  4. Turn the hex-key tab in a clockwise direction to tension the belt. Turn until the pointer aligns with the notch.
  5. Install the automatic tensioner bolt and tighten to 18 ft. lbs. (25 Nm).
  6. Rotate the crankshaft two full turns clockwise using the crankshaft pulley bolt.
  7. Recheck the automatic tensioner pointer.
  8. Install the front timing belt cover.
  9. Install the front timing belt cover bolts and tighten to 53 inch lbs. (6 Nm).
  10. Install the right engine mount bracket.
  11. Install the crankshaft pulley and tighten the crankshaft pulley bolts to 15 ft. lbs. (20 Nm).
  12. Install the serpentine drive belt.
  13. Install the right front wheel well splash shield.
  14. Install the right front wheel.
  15. Install the air cleaner housing.
  16. Install the air cleaner housing bolts and tighten to 89 inch lbs. (10 Nm).
  17. Connect the air cleaner outlet hose to the throttle body.
  18. Connect the breather tube to the camshaft cover.
  19. Connect the MAT sensor connector.
  20. Connect the negative battery cable.

Sep 25, 2010 | Suzuki Forenza Cars & Trucks

1 Answer

How do I time a 2006 dodge caravan 2.4L


2.4L Engine
NOTE You may need DRB scan tool to perform the crankshaft and camshaft relearn alignment procedure.
  1. Remove or disconnect the following:
    • Negative battery cable
    • Right front wheel and inner splash shield
    • Accessory drive belts
    • Crankshaft damper
    • A/C compressor/alternator tensioner and pulley assembly
    • Lower front timing cover
    • Upper front timing cover
    • Right engine mount
    • Engine mount bracket

    NOTE This is an interference engine. Do not rotate the crankshaft or the camshafts after the timing belt has been removed. Damage to the valve components may occur. Before removing the timing belt, always align the timing marks.
  2. Rotate the crankshaft until the Top Dead Center (TDC) mark on the oil pump housing aligns with the TDC mark on the camshaft sprocket (located on the trailing edge of the tooth).
  3. Loosen the timing belt tensioner lock bolt.
  4. Insert a 6mm Allen wrench into the hexagon opening located on the top plate of the belt tensioner pulley. Rotate the top plate clockwise until there is enough slack to remove the belt.
  5. If necessary, remove the camshaft timing belt sprockets.
  6. If necessary, remove the crankshaft timing belt sprocket using removal tool No. 6793, or equivalent.
  7. Place the tensioner into a soft-jawed vise to compress the tensioner.
  8. After compressing the tensioner, insert a pin (a 5/64 in. Allen wrench will also work) into the plunger side hole to retain the plunger until installation.

09943d3.gif

Camshaft and crankshaft alignment marks—2.4L engine


ed2b9ee.gif

To lock the timing belt tensioner, be sure to fully insert the smaller Allen wrench into the tensioner as shown—2.4L engine



03f364a.gif

Installation of the timing belt, notice the camshaft alignment— 2.4L (VIN B) engine


To install:
  1. If necessary, use tool No. 6792, or equivalent, to install the crankshaft timing belt sprocket onto the crankshaft.
  2. If necessary, install the camshaft sprockets onto the camshafts. Install and tighten the camshaft sprocket bolts to 75 ft. lbs. (101 Nm).
  3. Set the crankshaft sprocket to Top Dead Center (TDC) by aligning the notch on the sprocket with the arrow on the oil pump housing.
  4. Set the camshafts timing marks so the exhaust camshaft is 1/2 notch below intake camshaft sprocket. Make sure the arrows on both camshaft sprockets are facing up
  5. Install the timing belt starting at the crankshaft, then around the water pump sprocket, idler pulley, camshaft sprockets and around the tensioner pulley.
  6. Move the exhaust camshaft sprocket counterclockwise to take up the belt slack.
  7. Insert a 6mm Allen wrench into the hexagon opening located on the top plate of the belt tensioner pulley. Rotate the top plate counterclockwise until there is no slack on the belt. The tensioner setting notch will start to move clockwise. Watch the notch and continue rotating the top plate counterclockwise until the setting notch is aligned with the spring tang. Using the Allen wrench to prevent the top plate from moving, tighten the tensioner lock bolt to 220 inch lbs. (25 Nm). The setting notch and spring tang should remain aligned after the lock nut is tightened.
  8. Rotate the crankshaft 2 revolutions and recheck the timing marks.
  9. Check the spring tang is within the tolerance window. If not within the window, reinsert the Allen wrench and into the hexagon opening located on the top plate of the belt tensioner pulley. Rotate the top plate counterclockwise until there is no slack on the belt. The tensioner setting notch will start to move clockwise. Watch the notch and continue rotating the top plate counterclockwise until the setting notch is aligned with the spring tang. Using the Allen wrench to prevent the top plate from moving, tighten the tensioner lock bolt to 220 inch lbs. (25 Nm). The setting notch and spring tang should remain aligned after the lock nut is tightened.
  10. Install the engine mount bracket.
  11. Install the front timing belt covers.
  12. Install the A/C compressor/alternator tensioner and pulley assembly.
  13. Install the right engine mount.
  14. Install the crankshaft damper
  15. Install the accessory drive belts and adjust to the proper tension.
  16. Install the right inner splash shield and wheel.
  17. Reconnect the negative battery cable.
  18. Perform the crankshaft and camshaft relearn alignment procedure using the DRB scan tool, or equivalent

Please do not forget to rate and comment about your experience with fixya today... If there is any further assistance i can provide for you please let me know..

Dec 28, 2009 | 2006 Dodge Caravan

1 Answer

Installation on 94 1.9L timing belt


Remove the serpentine belt, remove the lower crankshaft pulley, place a jack under the oil pan and jack up the engine slightly, remove the engine mount (right top). Remove the timing belt cover, loosen the timing belt tensioner and pull tensioner pulley back toward the rear of vehicle. I like to then tighten the tensioner bolt to hold it in this position, remove and replace belt. If you need to put the engine in time then look at the camshaft there is a small arrow in the center it lines up with a dot on the end of the cylinder head. The lower timing mark is a small metal tip that sticks out from the lower gear and it lines up with a notch cut into the front cover just behind the lower gear. Once aligned properly put the belt on the lower gear and without turning the lower gear or camshaft gear pull the belt tight up to the cam shaft the cogs in the belt will line up with the grooves, then place the belt around the water pump drive gear and under the tensioner, then push the belt over all gears by hand without turning the engine. Loosen the tensioner bolt and apply a little pressure toward the front of the vehicle and tighten the bolt. Replace everything else previously removed. Engine should start and run normally. Hope this helps, let me know.

Dec 26, 2009 | 1994 Ford Escort

2 Answers

Replaced water pump and now i need to know how to reset timing


I hop you are replacing the belt and tensioner/ idler pulleys. the crank pulley has a notch approx 12'oclock. the cams will be marked rear cam "I" and front cam "E" .. put both letters at 12 o clock. there should be a notch at the top of the cover for the cams at 12 o clock. thats all there is to it. to tension the belt, after you have it all timed up. put some tension on it, tighten tensioner bolt, turn the engine 2 revolutions, then double check your marks, push down with you thumb between the cam sprokets with 20 lbs of force, the belt should delfect about 10MM if its too loose, loosen the tensione rbolt an dturn it tighter a little more an dck tension again. If you get it too tight it will whine and wear the cam journals, too loose and timing will not be correct.

Sep 18, 2009 | 2001 Kia Sephia

1 Answer

Timing for tropper 6cly and 4 camshafts and 24 valves model 2000


Timing Belt
Removal
1. Disconnect battery ground cable.
2. Remove air cleaner assembly.
3. Remove radiator upper fan shroud from radiator.
4. Move drive belt tensioner to loose side using wrench
then remove drive belt.
850RW001
Legend
(1) Crankshaft Pulley
(2) Cooling Fan Pulley
(3) Tensioner
(4) Generator
(5) Air Conditioner Compressor
(6) Power Steering Oil Pump
(7) Drive Belt
5. Remove cooling fan assembly four nuts, then the
cooling fan assembly.
6. Remove cooling fan drive pulley assembly.
7. Remove idle pulley assembly.
8. Remove serpentine belt tensioner assembly.
9. Remove power steering pump assembly.
10.Remove crankshaft pulley assembly using
5–8840–0133–0 crankshaft holder, hold crankshaft
pulley remove center bolt, then the pulley.
11. Remove right side timing belt cover then left side
timing belt cover.
12. Remove lower timing belt cover
13. Remove pusher.
CAUTION: The pusher prevents air from entering
the oil chamber. Its rod must always be facing
upward.
014RW011
Legend
(1) Up Side
(2) Down Side
(3) Direction For Installation
(4) Locking Pin
14. Remove timing belt.
CAUTION:
1. Do not bend or twist the belt, otherwise its core
could be damaged. The belt should not be bent at
a radius less than 30 mm.
2. Do not allow oil or other chemical substances to
come in contact with the belt. They will shorten
the life.
3. Do not attempt to pry or stretch the belt with a
screw driver or any other tool during installation.
4. Store timing belt in a cool and dark place. Never
expose the belt direct sunlight or heat.
6A–30 ENGINE MECHANICAL
Installation
NOTE: For correct belt installation, the letter on the belt
must be able to be read as viewed from the front of the
vehicle.
014RY00042
Legend
(1) Crankshaft Timing Pulley
(2) RH Bank Camshaft Drive Gear Pulley
(3) Water Pump Pulley
(4) Idle Pulley
(5) LH Bank Camshaft Drive Gear Pulley
(6) Tension Pulley
014RY00043
Legend
(7) Alignment Mark on Oil Pump.
(8) Alignment Mark on Timing Belt
(9) Alignment Mark (notch) on Crankshaft Timing
Pulley.
(10) Alignment Mark (groove) on Crankshaft Timing
Pulley.
014RW006
Legend
(1) Timing Belt
(2) Engine Rotation Direction
(3) Cylinder Head Side
1. Install timing belt.
1. Align the mark (notch) of crankshaft timing pulley
(2) with mark on oil pump (1).
Align the mark (groove) on the crankshaft timing
pulley (3) with alignment mark (white dots line) on
the timing belt (4).
NOTE: When timing marks are aligned, No.2 piston will
be on Top Dead Center.
014RW003
Legend
(1) Alignment Mark on Oil Pump
(2) Groove on Crankshaft Timing Pulley
(3) Alignment Mark on Crankshaft Timing Pulley
(4) Alignment Mark on Timing Belt
ENGINE MECHANICAL 6A–31
2. Align the alignment mark on the RH bank
camshaft drive gear pulley (2) to the alignment
mark of the cylinder head cover RH (3).
3. Align the alignment mark (white line) on the timing
belt (1) with alignment mark on the RH bank
camshaft drive gear pulley (2) (on the left side as
viewed from the front of the vehicle) and put the
timing belt on the camshaft drive gear pulley.
Secure the belt with a double clip or equivalent
clip.
014RW00004
Legend
(1) Alignment Mark on Timing Belt (White line).
(2) Alignment Mark on Camshaft Drive Gear
Pulley.
(3) Alignemnt Mark on Cylinder Head Cover RH.
4. Align the alignment mark on the LH bank
camshaft drive gear pulley (2) to the alignment
mark of the cylinder head cover LH (3).
5. Align the alignment mark (white line) on the timing
belt (1) with the alignment mark on the LH bank
camshaft drive gear pulley (2).
When aligning the timing marks, use a wrench to
turn the camshaft drive gear pulley, then set the
timing mark between timing belt and camshaft
drive gear pulley and put the timing belt on the
camshaft drive gear pulley.
Secure the belt with a double clip or equivalent
clip.
NOTE: It is recommended for easy installation that the
belt be secured with a double clip or equivalent clip after
it is installed the timing belt to each pulley.
014RW00005
Legend
(1) Alignment Mark on Timing Belt (White line).
(2) Alignment Mark on Camshaft Drive Gear
Pulley.
(3) Alignemnt Mark on Cylinder Head Cover LH.
6. Install crankshaft pulley temporarily and tighten
center bolt by hand (do not use a wrench).
Turn the crankshaft pulley clockwise to give some
belt slack between the crankshaft timing pulley
and the RH bank camshaft drive gear pulley.
2. Install pusher and tighten bolt to the specified torque.
Torque : 25 N·m (2.5 Kg·m/18 lb ft)
1. Install the pusher while pushing the tension pulley
to the belt.
2. Pull out pin from the pusher.
NOTE: When reusing the pusher, press the pusher with
approximately 100Kg to retract the rod, and insert a pin
(1.4 mm piano wire).
014RW011

Mar 18, 2009 | 2000 Isuzu Trooper

2 Answers

TIMING MARKS CAMBELT REPLACEMENT FOR CL-T CHARADE, PLEASE


This is the best I could find for you .. I am unfortunately able to verify the info because I have no personal experience with this car or its engine ...

Mar 14, 2009 | 1988 Daihatsu Charade

Not finding what you are looking for?
1990 Acura Legend Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...