Question about 1991 Ford Ranger Supercab

1 Answer

Does anyone know how to disassemble a 91 ford 5 speed manual transmission? Not removal, it is out but need to remove the input shaft, the primary input shaft gears teeth have been completely sheared off. Can you help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Ford Master
  • 1,075 Answers

Joseph,im a engineer for 30 years and i have done this job twice in that time, and i will tell you the truth it is a nightmare if you dont know what you are doing .from a old dog buy yourself a secondhand box i have seen top rated mechanics fire spanners across floors with anger try ing to do this job, please believe me its a nightmare.on a positave side some of the newer ones have a side plate with the about 12 bolts holding the input shaft gear and is quit easy to remove if this is the case come back to me and i will take you through the way to do this.please rate this answer.adrian,,,,,,,,

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the input speed sensor on a 2009 GMC Acadia be changed without having to remove the transmission


Did you do the diagnostic's that go to that code ?
DTC P0717: Input Speed Sensor Circuit Low Voltage
Diagnostic Fault Information
Circuit
Short to Ground
Open/High Resistance
Short to Voltage
Signal Performance
Input Speed Sensor Supply Voltage
P0717
P0717
--
P0716
Input Speed Sensor Signal
P0716, P0717
P0716, P0717
P0716, P0717
P0716
Circuit/System Description
The input speed sensor (ISS) is a hall-effect type sensor. The sensor faces the 1-2-3-4 and 3-5-R clutch housing machined teeth surface. The sensor receives 8.3-9.3 volts on the input/output speed sensor (ISS/OSS) supply voltage circuit from the transmission control module (TCM). As the 1-2-3-4 and 3-5-R clutch housing rotates, the sensor produces a signal frequency based on the machined surface of the 1-2-3-4 and 3-5-R clutch housing. This signal is transmitted through the ISS signal circuit to the control solenoid (w/body and TCM) valve assembly. The control solenoid (w/body and TCM) valve assembly uses the ISS signal to determine line pressure, transmission shift patterns, torque converter clutch (TCC) slip speed and gear ratio.

Circuit/System Verification
Engine idling, observe the scan tool Transmission ISS parameter while varying the engine speed. The Transmission ISS parameter should change with the engine speed and not drop out.
Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.

Ignition OFF, remove the control valve body cover. Refer to Control Valve Body Cover Replacement.
Connect the TCM harness connector.
Disconnect the input speed sensor (ISS) from the control solenoid (w/body and TCM) valve assembly.
Connect the J 38522 between the supply voltage terminal B and ISS signal terminal A at the control solenoid (w/body and TCM) valve assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Input Shaft Speed/Output Shaft Speed Input Test for further instructions.
Set the J 38522 signal to 8 volts, the frequency to 120 and the percent duty cycle to 50.
Ignition ON, observe the scan tool Transmission ISS parameter. The scan tool Transmission ISS parameter should be between 100-400 RPM.
? If not within the specified range, replace the control solenoid (w/body and TCM) valve assembly.
If all circuits test normal, test or replace the input speed sensor.

Control Valve Body Cover Replacement

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
Remove the oil cooler inlet hose (1) from the retainer on the control valve body cover.
Remove the oil cooler outlet hose retainer nut (5) from the control valve body cover.
Remove the oil cooler outlet hose (4) from the retainer on the control valve body cover.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the left engine splash shield. Refer to Engine Splash Shield Replacement.
Drain the transmission. Refer to Transmission Fluid Replacement.

you don't need to pull thr trans .

Feb 19, 2017 | GMC Cars & Trucks

1 Answer

Whats ford windstar error codes p0715 mean


I hope this helps and is what your looking for... good luck

http://www.fordobdcode.com/p0715-ford

Ford P0715 OBD-II Trouble Code Definition:
P0715 Input Shaft Speed Sensor Circuit Malfunction
P0715 Ford OBD-II Trouble CodeDescription:
OBD Trouble Code P0715 Input/Turbine Speed Sensor "A" Circuit What does the code mean? OBD-ii Code P0715 definition:
The input speed sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Symptoms Sumptoms of OBD code P0715
- Engine Light ON (or Service Engine Soon Warning Light) - Possible shifting problems Causes Causes of the OBD-II code P0715
- Transmission speed sensor circuit is open or shorted. - Poor transmission speed sensor circuit connection - Faulty transmission speed sensor The Error code is generally activated on detection of the following conditions: Diagnostic Trouble Code (DTC) P0715 is detected when TCM or ECM does not receive the proper signal from the sensor. Solutions

Jun 22, 2014 | 1999 Ford Windstar

1 Answer

Were is the input turbine speed sensor located at,and what does it look like.


The turbine shaft speed sensor is located inside the transmission. The transmission will have to be removed and disassembled to access the sensor. The sensor you have now... sound about what it looks like.

Dec 07, 2012 | 2000 Ford Explorer

1 Answer

I need to no how to change the trans bearing where the cv shaft goes in the side of the transmission 5 speed (driver side).


Whoa Pal !!!!! This is a major undertaking requiring the removal of the Half-shaft and in some cases the strut and spindle assembly. But, once access is gained to the transmission housing outlet then it is just a matter of removing the weather boot and shaft seal, chiseling out the old bushing type bearing and pressing in a new one and reversing all tasks in disassembly.

Apr 10, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

Can you tell me where vechile speed sencor 'A' is on my focus st the fault code is P0500


P0500 Vehicle Speed Sensor "A"
P0501 Vehicle Speed Sensor "A" Range/Performance
P0502 Vehicle Speed Sensor "A" Circuit Low Input
P0503 Vehicle Speed Sensor "A" Intermittent/Erratic/High
Vehicle Speed Sensor Removal & Installation Automatic Transmission To Remove:
  1. Remove or disconnect the following:
    • Output shaft speed (OSS) sensor electrical connector.
    • Bolt and OSS sensor
To Install:
  1. Apply a light coat of petroleum jelly to the O-ring before installation
  2. Install or connect the following:
    • OSS sensor torque bolt to 89 in-lbs (10 Nm)
    • OSS sensor electrical connector
Manual Transmission To Remove:
  1. Remove or disconnect the following:
    • Vehicle Speed Sensor (VSS) electrical connector.
    • Retaining pin.
    • VSS.
To Install:
  1. Install or connect the following:
    • VSS.
    • Retaining pin.
    • VSS connector.
---
The VSS is on the transmission near the output shaft. It will not be a wheel speed sensor on the hub.

Good luck on this repair, tommy.

Nov 06, 2010 | 2006 Ford Focus

2 Answers

CANT FIND WHERE THE SPEED SENSOR IS NO MY 1995 OLDSMOBILE AURORA


hi , their is two different speed sensors on your vehicle one is the input speed sensor which is inside the transmission and the transmission will have to be removed to replace it the other one s the output speed sensor is located directly above the passenger side trans-axle shaft. your input sensor is the sensor which tells the transmission when to shift and the output speed sensor tells the speedometer what it should display and both those parts are fairly cheap they are around 15-25 dollars but just remember if your input speed sensor is bad it is gonna cost you a minimum of 1000 dollars to have a mechanic fix as the transmission needs to be removed hope this is what you needed

Jun 06, 2010 | 1995 Oldsmobile Aurora

2 Answers

Ford transmission wines in 1st 2nd 3rd revers, no


It is a 5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings.

Apr 16, 2010 | 1995 Ford Aerostar

2 Answers

91 saturn SL2 started leaking trans fluid between the bell housing and motor it is a 5 speed


You have a transmission front seal that has gone bad. The transmission will have to be removed and new seals installed.

Feb 14, 2010 | 1991 Saturn SL1

1 Answer

Return fork on my shifter linkage has broken and need to know how to replace it.


I guess what you have is a 5 speed trans. you'll need to remove trans, remove stick, drive shaft, linkage, after you have trans out, remove top cover on trans, fork will be connected on cover, remove slide pin that holds fork and install new one, refill with manual transmission fluid.takes 1.75 qts.hope this was very helpful, good luck. Not as bad as it sounds.

Dec 11, 2009 | 1983 Ford F150

1 Answer

Exhaust removal required to drop transmission on 92 Ford Ranger?


Yes you do. trust me you don't want to get that thing half way out and down and not be able to continue. Soak those rusted exhaust studs in a good penetrating oil over night. I bet they come right out. I would not recomend cutting the pipe.

Aug 27, 2009 | 1992 Ford Ranger

Not finding what you are looking for?
1991 Ford Ranger Supercab Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...