Question about 1994 Plymouth Voyager

1 Answer

After the vehicle is running for an hour, the vehicle get hot and shut itself off.. After it cool down, it start up. We were told it might be in the steering column.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,403 Answers

Have you replaced yor thermostat? have you checked your radiator cooling fans to see if they are coming on while your car is heating up? when your temp. guage is halfway up your fan should come on. you can check fuses and relays in fuse box[black box under hood drivers side] check those to see if fuses are blown or if fan relays are coming on[ticking while engine heating up]radiator could need flushing out also, just narrow your search some by elimination. if you open radiator cap before you start engine,then start motor, let it warm up.look for circulation,,flow of fluid,bubbling, then thats a sign it's circulating,thermostat is good. no flow means that thermostat not opening,thats bad thermostat.replace the thermostat.if not that are fans coming on? when engine at mid range on temp. guage does fan come on? if not check fuses @ fan relay. if fan comes on ,it's good.check water pump pulley for wobbly pulley while motor not running, shake pulley back @ forth for play. any play in pulley means bad water pump. are the belts on? i went through everything i would look for myself. hope this finds your problem!!!!

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 84 ramcharger started fine used for about 1/2 hour plowwing driveway shut off would not restart until cooled off 2nd time it has done this?


Sounds as if the ignition control module is getting hot and not allowing it to restart. Had the same issue with a Dodge b-250 van, except for the plowing part. It would run for about an hour and start sputtering and shut off. After it cooled down, van would start and run great for the same length of time and do it again.

Feb 22, 2015 | Dodge Ramcharger Cars & Trucks

1 Answer

Engine wont start back up


So no solenoid click or anything? IF the solenoid at least clicks but the starter don't spin then it could be the starter itself is getting hot and not wanting to work until it cools down.

If it don't click then the same could be true for the solenoid itself.

Do the lights dim when you try to start it? If not it could be the ignition switch itself is not making contact after it gets warm.

The only way to know if you are getting power to the solenoid is to have someone turn the key to the 'start' position while you use a test light on the small terminal on the solenoid,

I'm not saying this is absolutely the problem but I've seen these cases on different vehicles.

Hope this helps.

Oct 05, 2017 | Oldsmobile Bravada Cars & Trucks

1 Answer

Transmission stick in third and neutral light come on with it, Clicking under dash occurs shortly after, thens car shuts down shortly after, then rufuses to start for about 1 hour. start fine after then...


check neutral switch relay get hot and it shuts down until cooled off. check temperature of engine and training if to hot computer will shut down to pervent damage.

Jan 31, 2018 | Cars & Trucks

1 Answer

Depressurize the radiator of a 2005 Buick LeSabre. I would like a detailed diagram of how to do it along with instructions. Thanks.


Simply shutting off the vehicle and waiting till the engine cools down will depressurize the cooling system once the engine has cooled for half an hour to an hour or so turn the radiator cap slowly till it releases any remaining pressure. If the cap is to hot to touch or you can not hold onto it for long enough to open it than the engine is too hot yet and needs to cool longer.

Jul 23, 2011 | 2005 Buick LeSabre

3 Answers

When i turn off the car the fan continues to run?


Many cars have this feature. The fan will run for a few minutes at a time until the coolant in the radiator drops below a certain temperature. Most vehicles with this feature will have a warning label on the radiator shroud indicating that the fan may start without warning when the engine or radiator is still hot. The only time you would need to be concerned would be if the fan continues to run without turning itself off, and causing the battery to be drained.

Feb 19, 2011 | 2003 Jaguar X-Type

1 Answer

No heat


This is a problem either with the heater core or the coolant system itself. Check your antifreeze levels. If they are low, have the vehicle towed to a dealer BEFORE you even think about starting the motor. Also, when you check the antifreeze levels, give the car at least one to two hours to cool off. If you open the radiator cap without cooling the engine down properly the boiling hot fluid WILL blow into your face. It is a pressurized system and it is extremely dangerous to open when hot.

Dec 01, 2009 | 2004 Lexus RX 330

1 Answer

Can anyone tell me if you have to prime the water pump in a Dodge avenger 1996. ? If so how?


water pump priming is not necessary on this vehicle. fill cooling system to proper level and start vehicle with cap off. let it run for 1 minute or so and top off. replace cap and fill resevoir to full hot mark. if vehicle starts to run too warm shut off for 1 hour and open cap and repeat procedure. hope this info helps you!

Sep 22, 2009 | 1996 Dodge Avenger

4 Answers

My 2003 V-6 Suzuki will only start and run when the engine is cool. When hot, it starts for about 2 second then shuts off. Engine check light does not come on and it showed no codes when the computer was...


The ignition coils are the usual culprit, they fail when hot, sometimes the module itself is bad, you need an Ignition specialist here, don't Shotgun (Replace parts till it runs)

Aug 30, 2009 | 2003 Suzuki Grand Vitara

2 Answers

After a long drive, won't start when hot. Usually cranks after cooling down .Before this started,it ran hot but the temp guage was not reading hot.The motor shut down and would not start until the engine...


definatly crankshaft position sensor, had same problem hour ago and changed it and started right up.. crankshaft positions sensors are known to cause this problem, stays open circuit when hot.

Jul 07, 2009 | 1997 Buick LeSabre

Not finding what you are looking for?
1994 Plymouth Voyager Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...