Question about 2004 Jeep Grand Cherokee

1 Answer

I have a 2004 Jeep Grand Ckerokee Limited, and I can't get any of the windows to roll up. The keyless remote will lock and unlock the doors, and the memory system for keyless # 1 & 2 settings work when the remotes unlock the vehicle. Is there an individual fuse that would cut power all of the windows, or a fuse or group in the distribution box in the engine compartment ? Or could this be cause by something in the overhead console that is programmable ? This is my mothers car, and she won't touch anything programmable, so no one has intentionally made any changes. 2004 Jeep Grand Cherokee limited, V-8, automatic, 4x4, etc.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Same thing happened to me. I was told this is common in jeeps and 90% of the time this is the solutuion. There is a rubber housing inbetween the drivers side door hinge and fuse panel with wires in it. Unhook your battery first then roll the rubber back and there will be broken wires in there. Strip the wires and reconnect them with connectors and you will be good to go. If tthe wires are broke on the drivers side panel no other windows in the jeep will work. these wires also control the mirrors.

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 jeep grand cherokee limited 4.0, the keyless control just unlock all the doors with the front passenger door open


be more clear., please.
what works, and dont, using all ways to lock a car.
all doors. all methods.
inside or out side car. (fob and not fob ways)
only that matters

Nov 14, 2016 | 1999 Jeep Grand Cherokee Limited

1 Answer

Is my keyless entry attached to my key 2000 jeep cherokee


all locks.
is the car battery fully changed.
at 12.6vdc rested.?

Aug 31, 2014 | 2000 Jeep Grand Cherokee Limited

2 Answers

Keyless remote 1996 jeep grand cherokee laredo programing


Instructions
  1. Programming the First Transmitter
    • 1

      Unlock all of the Jeepicon1.png Grand Cherokee's doors and open the driver's side door. Keeping the door open, lock it using the manual lock on the door itself.

    • 2

      Put the manual key into the ignition and switch it to the "On" or "Run" position, whichever applicable, without starting the engine.

    • Sponsored Links

    • 3

      Point the remote at the receiver (located by the little bulb on the caricon1.png ceiling) and hold down the "Lock" button for up to 5 seconds.

    • 4

      When the driver's side door unlocks, you know the remote has been programmed correctly. If you are only programming one remote, jump to the next step. If not, manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue.

    • 5

      Turn the key to the "Off" position and turn the ignition on immediately. This must be done within 20 seconds of programming the last remote. You're finished!

Sponsored Links

Read more: How to Program the Remote on a 1996 Jeep Grand Cherokee ' eHow.com http://www.ehow.com/how_7433787_program-1996-jeep-grand-cherokee.html#ixzz2KdCc5PQq

Feb 11, 2013 | 1996 Jeep Grand Cherokee

1 Answer

My 2004 jeep grand cherokee has issues with windows rolling down and the automatic door locks.. Neither will work on any door. The sunroof will roll back however.


Had a similar problem... the wiring harness that goes inside the drivers door had a broken wire, hence no power would go to the door locks or the power windows. Check the area where the harness flexes when the door opens and closes.

Oct 12, 2010 | 2004 Jeep Grand Cherokee

3 Answers

Which fuse comtrols power windows and locks on 2004 grand cherokee Jeep


it is probably not a fuse, check the boot inside the door to see if there is a broken wire. that is probably what it is.

Jan 16, 2010 | 2004 Jeep Grand Cherokee

1 Answer

My keyless remote for my 2000 jeep grand cherokee wont unlock the


go to autozone and use the remote tester on the counter to make sure that the remote itself is functioning or not, could be a dead battery. On some vehicles it is possible to reset the keyless entry by turning the ignition switch from off to run (right before the starter activates) 3 times or so, if you try this and the door locks activate then press the lock button on your remotes. good luck

Jun 03, 2009 | 2001 Chevrolet Blazer

1 Answer

Keyless remote


try this I can get you more info if needed have a good day DB
Notes SYNCHRONIZATION (ROLLING CODE) BUTTON TRANSMITTERS
The transmitter code will go out of synchronization if the button is pressed more than 255 times outside the range of the receiver which is inside the Door Module. In other words the transmitter will not work. To synchronize the code of the particular transmitter with the receiver, press and hold both lock and unlock buttons simultaneously for 5 seconds . Release the buttons and wait until the doors unlock indicating that the code has been synchronized. This may require waiting for as long as 6 minutes .

Feb 15, 2009 | 1997 Jeep Grand Cherokee

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

1 Answer

2004 Jeep Grand Cherokee Limited Doors Keep locking


The locks are programed to lock at 17 mph.
You can change this through the computer setup.

Sep 08, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...