At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Interior lights and the power door locks are controlled by a electronic control module . Hooking up a factory or some other type professional scan tool an checking for codes an viewing input data to these control modules would be the first thing to do.
The interior lighting system consists of the following:
lighting control module (LCM)
driver door module (DDM)
instrument panel
dome/map combination
courtesy/reading lamps
orientation light
door lamps
footwell lamps
luggage compartment lamp
glove compartment lamp
vanity mirrors
door ajar switches
viewing wiring diagrams an checking power and ground circuits for these modules would be the next step if no codes were found . Principles of Operation
Lighting Control Module
This vehicle uses a lighting control module (LCM). The LCM is a microprocessor-based module that controls several vehicle subsystems, responds to electrical input signals from various switches, sensors, and external modules and is located on the LH side of the instrument panel. LCM subsystem functions include:
headlamps with autolamps
turn signal lamps/hazard flasher lamps
cornering lamps
parking lamps
daytime running lamps
interior lamps
demand lamps
battery saver
The LCM interfaces with the driver door module (DDM) via the standard corporate protocol (SCP) network for the illuminated entry feature.
The interior lamp is illuminated by pressing the individual interior lamp switch. The interior lamp is also illuminated by door ajar switches located in the door latches, when any door is opened. A theater lighting feature gradually increases or decreases the light intensity when switched by opening or closing a door.
The dome/map lamp combination are located on each side of the interior lamp. The map lamps are operated independently of the interior lamp by two switches located on the interior lamps.
The interior lamps are illuminated by holding the panel dim switch in the UP position until the dome lamps turn on. The interior lamp also illuminates when a door is opened and actuates the door ajar warning lamp switch in the door latch.
The front map lamps are powered by the demand lighting circuit and the interior lighting circuit.
The rear passenger reading lamps are incorporated into the rear seat assist handle and are located over the rear door openings. These lamps are illuminated through power supplied by the LCM demand lighting circuit.
Interior lamps (controlled by the LCM) are activated by using the dome lamp switch (instant ON/OFF response) or when a door is ajar. The following lamps illuminate for interior lighting:
instrument panel interior lamps
front map lamps
rear reading lamps
door lamps
Demand lighting includes lamps that are illuminated by the customer by directly actuating a switch. The front dome/map lamps are located in the overhead console. Each lamp is controlled by its own switch.
The following demand lamps are powered by the demand lighting output of the LCM:
glove compartment lamp
vanity mirror lamp
luggage compartment lamp
Each lamp has a dedicated switch that closes to ground to illuminate the lamp.
The front map lamps are powered by either the demand lighting circuit or the interior lighting circuit, depending upon the position of the switch associated with each lamp. When the customer turns the front map lamp switch ON, the front map lamp is illuminated through power supplied by the LCM demand lighting circuit. If the customer moves the map lamp switch to the OFF position, the power from the LCM demand lighting circuit is interrupted and the lamp is reconnected to the interior lighting circuit.
The rear reading lamps are powered by either the interior lighting circuit or the demand lighting circuit.
The luggage compartment lamp is controlled by the trunk ajar switch, and is powered by the demand lighting output from the LCM, and is mounted near the center of the upper rear panel.
The glove compartment lamp system consists of a glove compartment lamp switch and wire and miniature bulb assembly. Opening the glove compartment door closes the switch which provides power to the glove compartment lamp switch and wire. The glove compartment lamp switch is grounded to the body sheet metal.
The vanity mirror lamp system consists of a switch and bulb assembly in the RH inside visor and the LH inside visor. Lifting the vanity mirror cover closes the vanity mirror lamp switch and provides power to the lamps.
The illuminated entry system is controlled by the LCM and provides interior lighting upon entry to the vehicle.
Interior lamps will be illuminated for 25 (±1) seconds which includes a theater lighting ramp-up time (0.5 seconds). This time interval does not include the theater lighting ramp-down time. Interior lamps will be turned off before the 25 (±1)-second timeout if the ignition switch is turned to the RUN or ACC position.
The illuminated entry system has the following additions to accommodate the remote entry system: pressing the unlock button on the remote transmitter will activate the illuminated entry system (with theater ramp-up). When the driver door module detects a button press, it sends a signal on the J1850 communication network activating the interior lamps. The lighting control module will turn off the lamps by sensing the all doors lock signal.
The battery saver feature prevents excessive drain from loads inadvertently left on. When the ignition switch is turned OFF, power is interrupted to the interior lamps and headlamps (after a 10-minute timeout) and the demand lamps (after a 30-minute timeout).
The battery saver has the following inputs:
this is the door open light indicator on your instrument panel correct? it thinks the door is open. do interior courtesy lights work? i.e. turn on off when opening doors? check for "normally open" circuit faults in the door switches
either the lights are turned on manually from the headlight/interior light switch, or you have a defective door switch that is telling the module that a door is open, or you have a door that is open, or your module that controls the interior lights is defective. I would start with the simple things, I would make sure all doors are closed. If they are, then check the headlight/interior switch to make sure the interior lights are in the off position, then check all of the door switches. They are simple normally closed push button switches that should be mounted on the car frame near the door hinges.
Hi, viewer. The interior light is powered and controlled by the body control module or BCM. However, there is an on/off button beside the main headlight switch that overrides the interior lighting function. If this button is off, interior lights will not come on regardless of any door being closed or opened.
If this button is on, interior lights will come on whenever a door is opened. If you close all doors, and if the driver door is the last to be closed, the interior lights will stay on for about 30 sec and then the lights goes off automatically. In case you left any door opened too long, the BCM has an internal timer that will shut off the interior lights automatically when it detects that a door is still opened and the allowable time has elapsed. The BCM is programmed this way to protect the battery circuit and functions. : )
If I am not mistaken, the plunger is located in the door with the latch. Most of the time you can just pull the door panel off and adjust the switch. After opening and closing the door, they get knocked out of adjustment. I sincerely hope that this helped you. Take care and best wishes.
Bryon
×