Question about 2004 Jeep Grand Cherokee

1 Answer

My power window/door locks/and power mirror on the drivers side control panel is not working

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There is a rubber with wiresin it inbetween the drivers side door hinge and the fuse panel.pull the rubber back and there will be broken wires. unhook battery and the strip and connect broken wires with connectors. These wires go to the mirrors,doorlocks and windows. It worked for me and was told 90% of the time this is the problem

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

2002 VW Jetta GL - Window & Mirror Controls no longer functioning


Check the wire bundle coming in to the door at hinge side. It is a short or broken wire

May 17, 2014 | Volkswagen Jetta Cars & Trucks

1 Answer

Power windows locks and mirrors


Sounds like the master switch is not plugged in properly, this is the switch in the driver's door.

Jun 07, 2012 | Cars & Trucks

1 Answer

Similar electrical issues with driver's side door controls. Power locks, power window, and power mirror on driver's side are not functioning. I can manually unlock the door, but the buttons on...


CHECK FUSES FOR POWER WINDOW,CHECK FUSE FOR POWER MIRROR AND CHECK FUSE FOR POWER DOOR LOCK.IF FUSE OKAY DOOR CONTROL MODULE FAULTY ITSELF.

Sep 11, 2011 | 2004 Saab 9-3

1 Answer

2004 grnd cherokee power windows and mirrors stoped working but power locks on doors still work except driver door


remove the plastic door panel on the drivers side unplug all of the cable bundles going to any controls on the door and plug them back in making sure that its got a good firm seat. then open your fuse box between the door and the dashboard and check any fuses that the lid suggests have anything to do with door or lock controls. goodluck

Mar 21, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

The power widow, window/door locks, & mirror control switches, all located in the driver's side door panel, spontaneously stopped working. i'm assuming that the power supply has disconnected, but can't...


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Aug 16, 2009 | Hyundai XG300 Cars & Trucks

2 Answers

All of the power windows just went out on my 04 Jeep Grand Cherokee. The power locks work on the passenger side door but not on the drivers side. None of the controls work on the drivers side including the...


slide the rubber boot up and check the wires in the hinge of the doors. I will bet anything that the wires are broken. that was what was wrong with mine. just splice them back together and everything should work fine.

Mar 09, 2009 | 2004 Jeep Grand Cherokee

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

2 Answers

Power windows/ door locks


you might have left your window cracked and it rained on it, or it could have gone out on its own but it is definately the master control switch, on drivers door needs replacing. hope it helped you.

Oct 29, 2008 | 2005 Chevrolet Silverado

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...