Question about 2000 Pontiac Grand Prix
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you can go to advance auto and use there scanner for free to clear the code its called an obd2 connection or when you disconnect your battery you can touch your black negative cable to your red positive cable that connects to the battery and it will completley drain everything and reset but warning you if your trying to get the car through emissions your gonna have to drive the car 50 or 100 miles after you disconnect the battery each time..
Posted on Sep 30, 2008
as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!
Posted on Jan 31, 2009
Although the Indicator says the vehicle is in "D" or "OD", is it really? If the linkage is mechanical, you may actually be in "3". Make sure the car is in neutral and pull the lever into the first forward position without looking at the indicator.
Does your vehicle have a switch to turn the OD off and you didn't know it? You may have inadvertently done this. In this case, though, usually there is a little dummy light on the dash that says "O/D off" or something like that.
Check the transmission fluid level on your vehicle and make sure it is to factory specification.
Posted on Mar 05, 2009
SOURCE: 1998 pontiac grand prix starter
disconnect the negative battery terminal first then disconnect the positive treminal so there are no accidents, raise the car safely go underneath & remove the starter cover should be 3 10mm bolts holding the cover on then remove the 2 through starter bolts 15mm then disconnect the + battery cvable from starter then disconnect the solenoid wire should be a 7 mm bolt. good luck
Posted on Sep 11, 2009
Tips for a great answer:
Oct 15, 2015 | 2000 Pontiac Grand Prix SE
Aug 02, 2014 | 2002 Pontiac Grand Prix
Apr 20, 2013 | 2002 Pontiac Grand Prix
Jan 31, 2011 | 2005 Pontiac Grand Prix
Jul 28, 2010 | 2000 Pontiac Grand Prix
May 16, 2010 | 1995 Pontiac Grand Prix
Mar 26, 2010 | 1997 Pontiac Grand Prix
Dec 05, 2009 | 2001 Pontiac Grand Prix
Mar 15, 2009 | 1995 Pontiac Grand Prix
Mar 05, 2009 | 1999 Pontiac Grand Prix
490 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: