Question about 1994 Chevrolet C1500

1 Answer

1994 chevy silverado 1500; how do you install a ball stud and clutch fork?

Posted by on

  • greenacres1 Aug 22, 2010

    I also need to know this answer. I have my transmission out and the clutch fork to ball stud attachement was broke, so I was not able to see how they were connected to each other. When I put in my new clutch fork, how do I connect it to the ball stud? Any pictures or descriptions of how?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Are you sure thats the problem if so,, you need to take transmission out to install a ball and new fork

Posted on Aug 22, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I put a new clutch in a 1993 mustang gt and when i mash the clutch pedal the clutch dosent disingage what would cause that.

your clutch fork either is'nt on the throwout bearing properly or on the pivot ball stud. odds are its off the pivot ball stud or you may have missed putting it back in, (it happens) do you have little to no firmness when you push the clutch in? and alot of play when you grab ahold of the fork by hand?

Aug 27, 2012 | Cars & Trucks

1 Answer

How to replace clutch fork pivot ball?

the one on my full size chevy is pressed in, i got a new one from the dealer and pressed it back in by putting a 19mm deep socket over it and taping it in with a hammer

Jun 24, 2012 | Chevrolet Chevy Cars & Trucks

1 Answer

Clutch will not engage on a/c for my 1994 chevy silverado 1500, could it be the fuse, and where is the fuse located

Usually when it gets low on refrigerant the clutch want engage it may just need charged.

Jun 04, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

Blew out rubber boot while lubing drivers side of 2002 chevy 1500

Maybe, I think you mean the Ball Joint Boot???? you may be able to get on from chevy dealer

Apr 12, 2010 | 2002 Chevrolet Silverado

1 Answer

Tapping noise near computer 1994 Chevy 1500 Silverado

air recir actuator motor shorted you can reach between blower motor and heater case and unplug a pain to replace

Oct 29, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

2 Answers

Replace upper ball joint 2003 silverado 1500

The ball joints on both 2wd and 4wd upper are pressed in you need to remove snap ring and using a hammer pop out the old one out this is after you seperate the upper arm from the spindle. To install the new ball joint you should use a ball joint press that you can rent at most autoparts shops

Aug 09, 2009 | 2000 Chevrolet Silverado

1 Answer

1994 chevy silverado wont TURN OFF

test the alternator thi keeps the truck running

Apr 09, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides