Question about 2004 Cadillac Deville
Stand bext to the car, engine off key out of ignition switch hold the lock and unlock buttons down at the same time for ten seconds if the locks do not lock then unlock it is NOT a re-sync problem. Make sur the battery is good and installed correctly If none of this works then you need to take car in for diagnosis of the keyless entry system. perfer a Cadillac dealer
Posted on Aug 22, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: replacing bulbs
well... it turns out the 04 is different.
check out this link. it may offer some insight. I understand the bulbd may be replaced in the switches, however you have to remove the aigbag to access....
Posted on Dec 28, 2008
SOURCE: How do I program a
came across this, maybe this will help out...this is for analog gauges....
With the ignition in the "RUN" position (engine does not necessarily need to be running, but it will work either way).
Press OFF and WARMER (or the OFF and PASSENGER WARMER buttons) on climate control panel simultaneously. Instrument Panel Cluster (IPC) will light all telltales, then go blank. System is now in DIAGNOSTIC MODE. After diagnostic mode cycles through and stops, press FAN DOWN button until "RFA?" is displayed, then press FAN UP. If "RFA DATA?" is displayed, press FAN DOWN. If "RFA OVERRIDE?" is displayed press FAN UP button.
If "RFA S00 NO OVERRIDE" is displayed, press FAN DOWN. If "RFA S01 PROGRAM FOB #1" is displayed, press FAN UP button.
IPC will show "0" on right side of Drivers Information Center (DIC) display. Press WARMER button on the climate control unit until "99" is displayed.
Press and hold TRUNK button on the transmitter. While holding TRUNK button, press LOCK button and hold both buttons for a total of 3 seconds. Locks will cycle when programming is complete. If transmitter is not programmed within 30 seconds after entering "99" on the display, system will default and you must begin at step #2 again.
To program second transmitter, press FAN DOWN button until "RF S02 PROGRAM FOB #2" is displayed, then press FAN UP. Repeat step #4.
To exit system, press AUTO, MODE UP, MODE DOWN, or RESET button.
Posted on Dec 23, 2010
Tips for a great answer:
Aug 02, 2017 | Cadillac Cars & Trucks
Mar 21, 2017 | 2004 Cadillac Deville
May 22, 2015 | 2004 Cadillac Deville
Feb 24, 2015 | 2004 Cadillac Deville
Aug 18, 2014 | 2004 Cadillac Deville
May 25, 2012 | 2004 Cadillac Deville
May 23, 2011 | 2004 Cadillac Deville
Sep 13, 2009 | 2004 Cadillac Deville
Dec 28, 2008 | 2004 Cadillac Deville
409 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: