Question about 2009 Dodge Nitro

2 Answers

Is thr a switch that lets the nito know that u had changed the oil

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My light, wipers and indicators not working on my dodge nitro

Posted on Sep 20, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

If you have the R/T with the onboard computer, you can reset the light through that. If not, there is a very simple reset sequence. 

Begin with the vehicle off. 
Turn the key to the ON position, but do not start the engine.
Press the accelerator pedal to the floor and release it three times.
Turn the key to the OFF position. 

Now if you turn the key on or start the engine, you should see that the light has reset itself, and will only come back on after 3000 miles, or if the ECU senses an oil problem. 

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oil light in the dash board is on on my 2007 pontiac g6 v6 the one with the oil can dripping so i got my oil changed and its still on what should i do?


that is the light to let you know there is no oil pressure (in theory). If the engine is not making any unusual noises than its probably just a bad oil pressure switch. The switch it typically located near the oil filter. usually a 1 1/16 oil pressure socket is needed to remove and replace the switch.

Feb 03, 2012 | Cars & Trucks

2 Answers

The change oil light came on. on my friends 2002 monte carlo ss so i gave it an oil change and a new filter . the light won't go off.


The "Oil Change Reminder Light" has to be reset.

To reset the oil change reminder light with the accelerator pedal, turn the ignition switch to the ON position. Do not start engine. After turning the ignition ON, depress the accelerator pedal fully to the floor and let it up again 3 times within 5 seconds. The oil change reminder light should flash a few times to let you know that it is resetting. If it does not flash, turn the switch OFF and repeat the procedure. After it flashes, turn the ignition switch OFF. Then start the engine. The light should come on for a bulb check then go out and stay out.

Apr 12, 2011 | 2002 Chevrolet Monte Carlo

1 Answer

How do you turn off the "CHANGE OIL SOON" light


For Buick Le Sabre, 1995-99, when "CHANGE OIL SOON" light is on:
  • Access the reset button in the glove box (refer to car manual if required).
  • With the engine off, set the ignition switch to the RUN position
  • Press and hold the reset button in the glove box for at least 5 seconds
  • The light should blink a few times (4) then go out!
Hope it helps: let me know how you go.

Dec 14, 2010 | 1998 Buick LeSabre

1 Answer

We are trying to find out if my 1997 buick le sabre has an oil pan sensor or oil pressure sensor and where it is located at so that we can change out the oil pan


all car well have a oil pressure sensor, the oil pressure sensor is what lets you know, you have good oil pressure, if light comes on low oil pressure, need to turn off engine before major engine damage occurs, the oil pressure switch will be next to the oil filter, screw into the engine block, your car also has a oil pan sensor, called oil level sensor, that one screw into the side of the oil pan, it let you know when your some what low on oil.

Sep 08, 2010 | 1997 Buick LeSabre

1 Answer

How do I reset the change oil light on my 2001 silverado?


DID YOU TURN ON IGNITION SWITCH ON AND SLOWLY DEPRESS AND RELEASE THE ACCELERATOR PEDAL 3 TIMES WITHIN 5 SECONDS.IT WILL TAKE LONGER TO RESET DETERMINE HOW LONG YOU LET THE OIL LIGHT STAY ON.WHEN YOU TURN ON SWITCH 5 SECONDS DEPRESS AND AND RELEASE ACCELERATOR 3 TIMES.IF DONT RESET.TURN OFF SWITCH.THEN TURN BACK ON.YOU MAY HAVE TO DO IT SEVERAL TIMES.LET SWITCH REST SOME TRY AGAIN.IT WILL TAKE A WHILE.WHEN EVER CHANGE OIL SOON LIGHT COME ON RESET IT THEN AND CHANGE OIL.DRIVE IT ON A WEEK OR TWO TAKES LONGER TO RESET.

May 30, 2010 | 2000 Chevrolet Silverado

1 Answer

1999 pontiac grand am 4dr. se. change oil light problem


seems like your oil pressure switch gave up, its located on the side of the oil filter, you can take it out and test with a amp meter. it should cost you less than 20 bucks to buy something like that.

Jul 20, 2009 | 1999 Pontiac Grand Am GT

2 Answers

The change oil light is on, just had a oil change today, how do I reset the switch and where is locate, for the light to go off? please help!


With the ignition switch on but the vehicle not started simply press the gas pedal all the way to the floor 3 times. This action will reset the OIL light. This is a orange display on the dashboard that will light up once and reset. Let me know how this works for you!

Apr 11, 2009 | 1994 Cadillac Fleetwood

1 Answer

1984 chevy s10


some of these cars had a low pressure fuel cut off switch buit into the oil pressure switch, make sure you have the correct oil sending unit. hope this helps let me know. ps use a a/cdelco part

Apr 10, 2009 | 1984 Chevrolet S-10

3 Answers

2007 FORD EXPLORER SPORT TRAC 4X4 Change oil light on


Press and hold the SELECT/RESET
control switch to select SYSTEM
CHECK when “SYSTEM CHECK /
HOLD RESET” is displayed in the
message center. Selecting this
function from the SETUP MENU
causes the message center to cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
Pressing the SELECT/RESET control switch cycles the message center
through each of the systems being monitored.

The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
4. DOOR AJAR
5. EXTERIOR LAMP
6. BRAKE SYSTEM
7. PARK BRAKE
8. MILES TO EMPTY
9. FUEL LEVEL LOW (will only display if 50 miles or less to empty)
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:
1. Enter SYSTEM CHECK to display
“OIL XXX% RESET IF NEW”.
2. Press SELECT/RESET control
switch to display “HOLD RESET IF
NEW OIL”.
3. Press and hold the
SELECT/RESET control switch for
more than 2 seconds. Oil life is set
to 100% and “OIL CHANGE SET TO
100%” is displayed.

Apr 02, 2009 | 2007 Ford Explorer Sport Trac

2 Answers

Where is the oil sending unit on a 2000 5.4 litre expedition


the pressure sender is near/next to the oil filter. And yes this does sound like a sender issue.

Jul 13, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2009 Dodge Nitro Logo

370 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...