Question about Lincoln LS

1 Answer

How to remove and replace rear door handle on 2003 lincoln ls. I know how to remove door panel - skip this portion. Just need to replace door latch (rear-left side)

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Unhook the linkages and any elec connectors then the three bolts on outside of door thats how u do the latch. which is it latch or handle?

Posted on Aug 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace left front fender


Replace left front fender - Fixya

www.fixya.com/cars/t26028082-replace_left_front_fender
Dec 29, 2015 - replace left front fender - Hyundai Motor 2003 Elantra question. ...Question about Hyundai Motor 2003 Elantra. Open Question ... How do i remove left front fender clip on a Lincoln ls 2002? Jan 04, 2015 ' 2002 Lincoln LS.

Replace 2003 hyundai elantra front passenger outside door ...

www.fixya.com/cars/t17348691-replace_2003_hyundai_elantra_front
Mar 26, 2013 - Question about Hyundai Motor 2003 Elantra. Open Question.Replace 2003 hyundai elantra front passenger outside door handle. Need to replacebroken exterior door handle on front passenger .... replace left front fender.

Dec 29, 2015 | Hyundai Motor 2003 Elantra

2 Answers

How do i remove the door panel off of a lincoln ls?


Pry the round screw covers off of the armrest and remove the screws. Remove the door handle and take a flat blade (stiff putty knife) and pop the plastic clips out by placing the blade between the door panel and the door and prying upward. Slide the blade to find the next clip. There are several of them. When all of the clips are poped out from the door push the door panel up which releases it from the window opening.

Dec 31, 2009 | 2000 Lincoln LS

1 Answer

Same problem!


Yoy need to replaced the rear door handle and poss latch.
You can get the door open by removing the door panel and manually pulling on the latch cable

Aug 04, 2009 | 2006 Toyota Sequoia

2 Answers

My rear hatch door handle broke i need to replace it. how do i replace it?


how do i get the rear gate panel off so I can replace the latch on the 2003 sequoia.

Jul 06, 2009 | 2002 Toyota Sequoia

1 Answer

Rear door on driver side won't open,have taken the panel off the inside of car,seems like the lock won,t travelas far as it does on the other door.is there any way to open this door,thanks[1997 lincoln...


Rear
Removal
  1. Using a small screwdriver, remove the screw cover from the armrest of rear door trim panel (27406).
  1. Remove the two retaining screws.
  1. Using Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent, pry rear door trim panel from door inner panel.
  1. Disconnect electrical connectors.
Installation
  1. Position rear door trim panel on door inner panel, aligning two locators on rear door trim panel. Reverse Removal procedure.
------------------------------------------------------------------------------------ Rear
Removal
  1. Remove door trim panel and watershield. Refer to Section 01-05 .
  1. Check all connections of remote control links and cables. Service as necessary.
  1. Remove remote control assembly.
  1. Remove door latch remote control assembly from latch assembly.
  1. Drill out rivet at bellcrank and link (264B14).
  1. Remove three screws attaching latch assembly to door.
  1. Drill out rivet that attaches actuator motor to door.
  1. Remove latch assembly with actuator motor and door latch control rod lever link assembly.
Installation
  1. Install new bushings and clip onto latch assembly.
  1. Install latch with links and power lock actuator into door cavity.
  1. Position latch assembly to door, aligning screw holes in latch and door. Install three screws. Tighten to 10-13 Nm (89-115 lb-in).
  1. Attach door latch actuator motor to door with a new rivet.
  1. Install bellcrank and link to door using a new rivet.
  1. Install inside door handle and remote control assembly to door.
  1. Open and close door to check latch assembly operation.
  1. Install watershield and door trim panel. Refer to Section 01-05 .
ee8a11f.gif
Item Part Number Description 1 221A00 Door Handle to Door Latch Actuating Cable 2 26446 Rear Door Control Rod Retainer 3 377901 Plug Button 4 26412 Rear Door Latch 5 W623451-S2 Push Nut 6 224A32 Counter Balance 7 22450 Door Outside Handle Tension Spring 8 W701210-S309 Screw 9 224A20 Outside Door Handle Anti Rattle Pivot (2 Req'd) 10 22404 Door Handle 11 224A24 Front Door Outside Handle Spacer (2 Req'd) 12 264A64 Rear Door Actuating Rod 13 22408 Outside Door Handle Anti-Rattle Bumper 14 22428 Outside Door Handle Large Pad 15 N621906-S2 Nut (2 Req'd) 16 N807329 Screw (3 Req'd) 17 26595 Rear Door Electric Latch Actuator (RH) 18 W701566-S47 Rivet 19 431C04-A Rear Door Latch Striker Assembly 20 — Door Lock Striker Plate (Part of Door Shell Assy) 21 W525172-S Rivet (2 Req'd) 22 264B14 Bellcrank and Link (RH) 23 264A50 Bushing 24 N802034-SG Rivet 25 26420 Rear Door Latch Control Rod Link 26 W525172-S Rivet (2 Req'd) 27 21818 RR Door Latch (Inside) 28 A26460 RR Door Latch Push Button Rod 29 21982 Door Latch Rear Striker Assembly 30 N808377-S101 Screw (2 Req'd) 31 250A04 Rear Door Catch 32 N801010-S100 Truss Head Bolt (2 Req'd) 33 N804234-S2 Screw 34 266A74 Rear Door Latch Actuator Retainer 35 24630 Rear Door 36 26552 Rear Door Latch Control Escutcheon A — Tighten to 21-29 Nm (16-21 Lb-Ft) B — Tighten to 10-13 Nm (89-115 Lb-In) C — Tighten to 7-8 Nm (62-70 Lb-In) D — Tighten to 26-34 Nm (20-25 Lb-Ft) E — Tighten to 3-4 Nm (27-35 Lb-In)

Mar 24, 2009 | 1997 Lincoln Continental

1 Answer

How to change tail light bulb in 2003 lincoln ls


I can provide 2002, don't have 2003. may be similar. please rate as solveed problem if this is what you needed.

SECTION 417-01: Exterior Lighting 2002 Lincoln LS Workshop Manual
REMOVAL AND INSTALLATION Lamp Assembly —Rear Removal and Installation
  1. Remove the luggage compartment door trim panel.
    1. Remove the 13 pin-type retainers.
    1. Remove the luggage compartment door trim panel.
93ced34.gif
  1. Remove the rear lamp assembly.
    1. Disconnect the electrical connectors.
    1. Remove the nuts.
    1. Remove the rear lamp assembly.
    • If necessary, install new bulbs.
5f6d88b.gif
  1. To install, reverse the removal procedure.

Mar 22, 2009 | 2003 Lincoln LS

2 Answers

Rear door won't open


You can get the panel off with the door closed. I just took mine off because of the same problem. The top portion is only connected with some clips inside the panel. Take the screws out of the rear side window first. The panel will pop off if you gently pry with a flatbar. under the panel are three screws. Remove the screws and lift up on the bottom panel. It comes right off. Find the cable that goes to the top latch and pull it. It should release and you can replace the door latch assembly. Mine were both broken and I am in the process of fixing them.

Mar 21, 2009 | 2001 Ford F150 Styleside SuperCrew

2 Answers

2000 lincoln ls


I just went thru this on my 2002. The silver handle is actually plastic (I didn't previosly realize this) and had broken in such a way that it no longer applied leverage to the door mechanism. Everything still worked fine from the outside.
I got a new handle from the dealer (is one complete piece) for about $70. and took the door apart (much more difficult than it sounds).3 or 4 screws across the bottom - 2 in the flip up portion of door handhold and 1 straight behind the handle itself. Lots of plastic pop locks holding door in place - need to be pulled straight out vice normal slide up - proceed slow - very easy to break plastic pieces. Replacing handle requires you to drill out three rivets and replace them for holding new door handle in place.
Can do in about 1 hr with help and all the necessary tools - flat pry bar, screwdrivers, cordless drill, etc.

Dec 12, 2008 | 2000 Lincoln LS

4 Answers

Door panel removal


My window has dropped down on the drivers side and I can hear the motor working but the window is down in the door panel and won't come up. How do I get the door panel off to see if the window can be placed back on track. I see 1 screw only and after unscrewing it panel is still firmly attached. Please help . I need to know how to get this door panel off.

Thanks,

Rick

Jul 06, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...