SOURCE: 1995 gmc sonoma ignition key worn out
You have to remove the stering colum covers and in the ingnition key drum on the side there is a little hole, press the inside pin and pull the key ccylinder out, you can buy on autozone or pep boys.
SOURCE: replacement hazard switch on '96 sonoma
Lol... I too have to do the same thing. Let me know what you find out.
SOURCE: how to change ignition switch on 1992 gmc sonoma
Remove the kick panel covers, the lower portion of the dash, remove the
lower half of the covers on the steering column. You will have to cut
about 3 or 4 wire ties.
You will need a special tool to remove the
bolts from the existing ignition switch, (it looks like a reverse torx
screw). To remove the other end of the existing Ignition switch cable
you will need a nut driver to remove the connector.
Remove the two
additional connectors on the outside of the connection. Re-install the
additional connectors onto the new switch harness. Connect the adaptor
and tighten the bolt. install the switch and tie the harness back into
place. replace the cover and Dash panels.
SOURCE: where is the fuel shutoff switch on a 1996 gmc sonoma?
no fuel shut off switch on pickups that i know of possibly bad fuel pump find your red bypass wire at relay to test pump
1,225 views
Usually answered in minutes!
×