Question about 2003 GMC Yukon Denali

1 Answer

I have a 2003 GMC Denali and the drivers door window will not go down. It was making a grinding noise a few times before it stopped working

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Probably a cable operated setup but regardless, its the motor or regulator. if its cable operated u want to get the motor/regulator combo. the cables fray and get f'd up after awhile. to be sure, take the door panel off and make sure u have power and ground on the motor terminal (only two wires plug in they swap pos and neg with up and down)

Posted on Aug 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rear passenger window dropped down 2006 yukon denali


Hi, please replace window glass motor system.

Jun 17, 2014 | 2006 GMC Yukon Denali

1 Answer

I can not get the alarm to go off on 2002 denali


try this for me. roll the window down on the drivers side, close the door and push the lock button on the remote 2x and a chirp noise should be heard from the horns. now reach in and manually unlock the door[don't use the remote or power lock switch]and open the door. this is a test for factory alarms not aftermarket. the alarm should sound.

Jan 24, 2013 | 2002 GMC Denali

1 Answer

2003 Avalanche drivers door window has grinding noise and wont go up, does the regulator need replaced or what?


Yes, it sounds like the regulator is at fault. The grinding noise sounds like a stripped gear. You will have to pull the inner door panel off to investigate.

May 26, 2012 | 2003 Chevrolet Avalanche

1 Answer

My windows are not rolling down in my 2003 GMC Yukon denali?


It might be the drivers window switch. All power goes through there before the other window switches. But first check your fuses. Look in your owners manual to find location.

Jun 12, 2011 | 2004 GMC Sierra Denali

1 Answer

My 2003 Yukon Denali has an intermittent problem with the passenger door window. It sometimes will not operate with either control. I can hear electrical clicking when either switch is activated. ...


the door window motor might be weak or has stoped working. my 2003 pass window motor went also, all others work fine still but the drivers is starting to get weak now, i tried to lube the cable and sliders but that did nothing. Replaced pass with a $60.00 used and its great.

Apr 16, 2011 | 2003 GMC Yukon Denali

1 Answer

2003 Yukon Denali drivers side window just stopped working. No noises no warning just nothing happens when I press button?? Is this a Switch? Can I replace myself?


check the fuses it may be the window motor or the main power switch and the dealer has to repromgram it there is a speacal gm tool for that.

Jan 16, 2011 | 2003 GMC Yukon Denali

1 Answer

2002 GMC YUKON WILL NOT GO IN REVERSE ALSO MY TRACTION LIGHT AND ABS LIGHT ARE ON AND WHEN DRIVING I MAKES A GRINDING NOISE


Same thing happened to my Denali but it wouldn't go forward, and it made the same grinding noise. It turned out to be the rear end and they replaced it for over a thousand dollars.

Jan 14, 2010 | 2000 GMC Yukon Denali

1 Answer

2003 Yukon Denali window goes up slowly. Where


You can get away with just lubricating the window runners with silicon or graphite. Don't use oil base lubricant, oil breaks down rubber like the ones use on the window runners. I use silicon and with the spray tube from the can, spray it along the window runners on both side. Towards the front and back of the door, Roll down the window and where the glass runs down in to the door is the runners i am talking about and you should be able to spray along there with the tube and just clean the glass from any over spray. Good luck and this should help.

Jan 13, 2010 | 2003 GMC Yukon Denali

1 Answer

Driver window switch not working


That buzzing sound was probably a short circuit in the switch panel. You will need to take the door card out and replace this panel. First check the fuses though. You may have blown a couple of extras because of the short. Did the door get wet on the inside somehow?

Jan 06, 2010 | 2003 GMC Yukon Denali

Not finding what you are looking for?
2003 GMC Yukon Denali Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...