Question about 2005 Suzuki Forenza

1 Answer

What would cause not geting any oil pessure - 2005 Suzuki Forenza

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 160 Answers

1: oil pressure sensor/wiring
2: blockage
3: pump
4: faulty gauge

Start with the easy and most likely suspects first.
Pull the sensor and check for proper operation and meter-check the wiring.
If the sensor checks out, pull the oil filter and mount at the block and check for blockages (replace filter).

The first two easy and obvious checks cover 70% of the low-to-no pressure problems.

Posted on Aug 22, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My oil pressure just vanished when I pulled off of hwy,,,bells where going off.message change oil ,,oil gauge reading 0,,,,,oil is full in crankcase

If the oil pressure light is on and the oil level is ok, then this indicates either oil pump or the oil pressure switch is faulty!

Dec 21, 2014 | 2004 GMC Yukon

1 Answer

Oil pessure drops to 0 when engine warms up

it appears that the pump pressure relief valve is stuck and is not sealing off the oil system to allow pressure to build up at idle. It may be necessary to remove the oil pump and pressure relief valve for checks /repairs.

Apr 03, 2014 | 1994 Ford Bronco

1 Answer

Not geting oil in head

If you have had the head off check that the head gasket has an oil hole to allow the oil to get to the head

Jan 14, 2014 | 1991 Mitsubishi Eclipse

1 Answer

Low oil pessure, but the oil is not low.

Remove the sensor and test with an external gauge, If pressure is okay, suspect item is the pressure sensor.

Oct 10, 2009 | 2002 Volkswagen Passat

1 Answer

I have oil come out the right side of my cam cover

you have a seal leaking behind that cover tgere is nio presure relief valve

Aug 16, 2009 | 1995 Eagle Talon

1 Answer

Oil perssure not steady on 02 ford ranger

Did you check oil pressure with a oil pressure gauge from the oil gallerys in the block. Determine if the oil pressure is adequate. Most likely its probably a bad gauge but if you used a oil pressure gauge and there readings inidictive of low source oil pressure then most likely you have a pump failure, or there is inadequate oil volume in your engine.

Mar 26, 2009 | 2006 Ford Ranger

1 Answer

1999 Isuzu oil in coolant reservoir

If oil is geting in the coolant, you most likely have a leaking head gasket. there is one other item it could be if it has an automatic transmission, and that is the transmission cooler in the radiator, if the cooler is leaking it will allow transmission fluid to mix with the coolant.

Nov 22, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
2005 Suzuki Forenza Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides