Question about Lincoln Continental

3 Answers

Changed steering colume, works fine.Power w. don't work.No power to windows fuse in box. Theres a internal locking flnger connector hanging down about 10 in. left of steering colume.No luck where it goes.Don,t know for sure if this is why windows don't work, The windows worked before installation of steering colume.Could you please tell me where connector goes? Also I best find a fuse box diagram, could you help me on this too please. Sincerely,Keith.

Posted by on

  • 1 more comment 
  • rich abraham Aug 22, 2010

    same comment as last one.

  • rich abraham Aug 23, 2010

    Hi! Sam comment as last, but the black contector is not long enought to reach ignition switch.If I had a diagram of other large Ford cars of era,fuse box and wire harness,I might be set.Keith.

  • rich abraham Mar 24, 2011

    Thank YOU1

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

What year is the Lincoln? I will try and find you some manuals or at least a wiring diagram so you can figure out the windows.

Posted on Aug 23, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 6,826 Answers

It plugs into the ignition switch,if there is no place for it,then remove your ignition switch from your original column,and install it into yours.This is the most likely problem.

Posted on Aug 22, 2010

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Aug 23, 2010

    Look on the original column for some thing that is not on the column you have in the vehicle you have now

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 22,219 Answers

Sorry i have no product knowledge of this vehicle to help you find the position where this wire goes ,but when iam at a loss like this then i go by the length of the wire ,now check if this wire has a 12v feed ,if it has then it could run towards the door piller under the dash to connect up with the wire that goes into the rubber boot that feeds the wires through to the door to operate the switches in the door ,sorry but thats about the best i can come up with for now ,but if it was a ford escort or a seat ibiza ??

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Where is the fusible link that runs the power windows on a 96 Toyota camry?


Hey, the fusible link you are looking for is to the right of the fuse box under the dash behind the coin holder, you have to remove the panel that holds the coin holder you will see two 10mm bolts on the bottom and then there will be two covers towards the top, take them out with a flat tip screw driver and there will be the other 2 10mm once you take that off you will want to take the air duct piece out that is in the way, it takes some force but it will just pop out, then look to the top right corner of the fuse box and you will see a pink 30 amp fuse and that is your culprit, hope thi helps you out.

May 19, 2014 | 1996 Toyota Camry

1 Answer

2011 lucrene is dead no electric at all


first check you battery and terminals going to the battery, second check your main fuses. some are along side the dash when you open your door. the other big fuses you want are under the hood. theres is a black plastic box with a clip in the center usually drivers side. open the panel and notice large fuses. these fuses power the higher voltage accessories, AC, blower for heater computers, starter alternator etc. pull one at a time. hold it up to the light and look for a broken fillament if good replace and move on to the next. Also check on the bottom of your steering colum. Many times there are a clip bracket that holds all the wheel, signal, ignition controls etc. check to see if the plugs and wires coming down the steering colum are plugged in tight.

Apr 06, 2014 | 2011 Buick Lucerne

1 Answer

98 ford taurus flooded... power locks, windows, seat won't work now


I would expect to find a main wiring connector has some serious corrosion in it.
The fuses for those circuits would be in the fuse box in the engine compartment.
You could try running power direct to the driver's door switch to make the windows come down. Make sure you have a fuse or breaker in the line.

Sep 12, 2012 | Ford Taurus Cars & Trucks

2 Answers

Hyundai ix35 2012 window lock stuck. passenger window half down and cant get it to move up or down


Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.

Sep 12, 2012 | 2011 Hyundai ix35 2.0

1 Answer

No parking lights or instrument cluster lights


sounds like a broken wire check between the switch and the base of the steering colum wires do break and with the colum moving up and down it would be where i would start to look

Apr 18, 2012 | 2004 Saturn VUE

3 Answers

1997 Honda accord nothing on instrument cluster works,only the battery light. Power windows will not work. shift lock solenoid doesn't work.Digital clock does not work. Lights on the console shifter...


1997 Honda accord nothing on instrument cluster works,only the battery light. Power windows will not work. shift lock solenoid doesn't work.Digital clock does not work. Lights on the console shifter don't light up. Help!

Aug 29, 2011 | 1997 Honda Accord

1 Answer

My 96 maxima wont turn over. Switched out battery and changed connectors. Starter is fine and the alternator is brand new. Whenever I turn the key the only lights that come on are the sensor lights on the...


it sounds like you may have a bad ignition switch, check all the main fuses 20 and 30amp under the hood also check body ground straps, otherwise you will need to remove the plastic cover around the steering colum and using a test light check for power to each wire at the ignition switch , every wire will have voltage in some position of the key being turned

Jul 31, 2011 | 1996 Nissan Maxima

1 Answer

What could cause brake lights to work every now and then


I would check your brake light swich located under dash just fallow your brake pedle with a test light see if you have power going to it slitely press brake pedle see if other side of switch has power (key on car not running) if not try ajusting it by pulling on it or unscewing it if all checks out ok replace turn signal switch disconnect battery remove center part of steerring remove center bolt with steerring puller pull steering wheel with locking plate puller pull locking plate remove turn signal handle emergency button three scews holding turn signal under dash fallow steering colum disconect wires on right side (passenger side) tape a long wire to end of connector pull turn signal without pulling tape wire all the way out so you can tape it to new turn signal wire connector to be able to pull wires back down steerring colume (you might have to losen steerring colume and bracket two scews under dash four on steering colume)

Jun 27, 2011 | 1998 Dodge Ram 3500 2WD

1 Answer

92 buick lesabre, left blinker won't work unless you move it manually. bulbs and fuse are fine. hazards work.


Hi Friend:

Since you've check or Changed your Bulbs and Fuse also Check or Replace your Turn Signal Flasher,Just as a Percation i would Double Check Fuses,Bulbs and Signal flasher.

If these are All showing bad I would say your Signal Switch has Stopped Working.

To Replace the Signal Swith :

1st Disconnect your Negative Battery Cable.

Remove Steering Wheel (you'll need a Puller, the remove the Shroud around the Steering Wheel Colume.

CAUTION= If you have Air Bags be careful. But you will have to remove the Air Bag Module by removing the coil lock spring Screw.

Then remove the Retaing ring and Coil Spring it will still be attached to your wiring=Just let it Hang.

Next you'll need a Compression Lock Spring Plate Tool.

Attach it to the Center of the Steering Colume, Rotate the Nut Clockwise to Remove,After Compressed you'll see a Metal Snap ring Remove it from the Groove then remove the Tool& Plate

Now you'll need to remove the Plastic Cancel ,the ring and ALL the Bearing including the Bearing Race.

Remove the Signal Arm Lever Screw. then the Signal switch Screws. Pull the Switch out and let it Hang(Still attached to the Wiring.

Get down under then you'll have to look for the screws that hold the wiring to steering colume, Remove then.

Then remove the Retaining Rng and the Wire Plug Protector.Now you Can Pull the Signal Swith Out.

Installing New Swith Simply Reverse the Removal Directions to Install your New Switch.

Please take time to Vote on my Quality of Service and the Help i Provided And a Small Testamony would be Great.If you don't mind.

Thanks for Using FIXYA

From: d_hubbs Good Day Sir





Jul 05, 2010 | 1992 Buick LeSabre

1 Answer

1997 yukon throwing transmission codes


check fuse o at left fuse by drivers side box for power when key is on. if no power replace ignition eletrical swicth at steering colum

Mar 28, 2009 | 1997 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...