Question about 2002 Volvo S60
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to remove front door
Pop the grab handle cover off, two different styles.
1. With a slot under the grab handle, take a small screw driver off and gently push up, it should just pop out.
2. Simple cover that can be separated with a bone tool or similar so you don't chip the cover piece.
Behind that you will find two Torx 25 screws, Take those out.
Around the edge of the panel should be around 8 plastic rivet type of thing.
Again...two different styles.
1. With center pins that blend in perfectly with the rivet. Should be about 3/32nds diameter. Push the center in and the rivet deals should pop out. Be sure not to lose the center piece...easy to lose.
2. Same deal but with a larger center pin.
Take the plastic triangle piece near the upper right hand area as facing the panel.
Pull bottom away from door and up to release from top section of door.
Careful removing the cable for the door lock release, and remove the connectors from the tweeter and driver's door module.
Posted on Aug 14, 2008
On my 2000 jetta glx, I had to replace both the shift knob and boot as one. It is built as one unit. You have to pull the boot up over the shift knob, break/bend a clip to "unlock" the shift knob then pull up. I hope the new knob you got has the boot built in and comes with a new clip.
Posted on Mar 27, 2009
If you remove the top plastic cover, there should be a flange bolt which holds a spring connected to the shift lever. Be careful with the over-drive button so you don't rip out the wires during disassembly. Loosen that flange nut, remove the spring, and lift off the bottom half of the shift knob.
Now you can remove the two screws at the front of the plastic shift assembly cover to replace it with your new one. Reassembly is reverse procedure---take your time and don't force---the plastic is like those stupid map pockets that shatter when torqued!
Posted on Mar 27, 2009
Tips for a great answer:
Oct 20, 2015 | 2004 Volvo S40
Jun 16, 2010 | 2001 Volkswagen Golf
May 20, 2010 | 2002 Volvo S60
Jul 30, 2009 | 2004 Volvo V70
Jul 29, 2009 | 2002 Volvo S60
Mar 12, 2009 | 2002 Volvo S60
Mar 10, 2009 | 2001 Volvo S60
Mar 06, 2009 | 1990 Volvo 240
Sep 18, 2008 | 2002 Nissan Xterra
706 people viewed this question
Usually answered in minutes!