Question about 1995 Acura Integra Coupe

Open Question

How to check ignition coil on a 1995 integra gsr

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: Re:1.8 gsr Turbo ignition coil problem

when you replace your ignition coil is it the right one spec from factory? Also when ever you replace a coil it is good practice to replace leads and spark plugs at the same time and test rotor and cap as these parts if worn or damaged will put your coil under extra load making its life shorter.

Posted on Sep 05, 2008

Ad
  • 83 Answers

SOURCE: i need a complete wiring diagram for a 98 acura

try here: http://www.hondahookup.com/manuals/

Posted on Sep 10, 2009

  • 653 Answers

SOURCE: 91 integra distributor

That is one for the dealer, or at least a reputable parts store, who will accept your return if it doesn't work.

Posted on Oct 10, 2009

planet-x
  • 232 Answers

SOURCE: check engine comes on every times i drive my 1993

you need to get the code checked from the ecu using an OBDII scanner, otherwise the information you have given cannot be used to diagnose the problem.

The check engine light comes on if any of the car's sensor's are faulty or do not respond to the ecu.

If the car drives perfectly even though the light comes on, the likely problem is the o2 (lambda) sensor on the header or cat, which causes a CEL but no ill running effects.

Go to a garage who can pull the codes off the ecu then look up the code on the integra or honda forums and take it from there.


Posted on Oct 23, 2009

  • 1149 Answers

SOURCE: need code for 1999 acura integra radio

Hi:

You have to go to your Integra dealer to get that, due to the fact it is an anti theft code. Of ten they also need the number off the top of the radio too.

This keeps thieves from selling stolen radios...

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Integra gsr i have change the altnater and change like three batteries. check all the wires in they all good just wandering whats wrong


Could be your ignition switch. It's mounted inside the steering column cover on the key tumbler. Usually a white switch secured with 2 screws. There are so many contact points in there that can fail and cause you to be able to turn your radio on and move your windows long after your car has been shut off. I did this fix a couple of weeks ago on an Accord. All is good now.

Apr 12, 2011 | 2000 Acura Integra

1 Answer

I cleaned the spark plugs in my 1995 acura integra gsr and now it wont start. there is no spark. what happened???


Well I can't see what you did wrong from here, but I would start by purchasing all new plugs and have the parts guy gap them for you. Then I would also buy a new set of plug wires, good ones not generics. Lastly I would have someone with mechanical experience take the old ones out one by one and replace with the new stuff. Just do one cylinder at a time so you do not get the timing messed up and cause it to not start. Do that, then get back to me.

Jan 10, 2011 | 1995 Acura Integra Coupe

1 Answer

NEED a code for 1995 acura integra gsr? my radio stop working after i had my battery replace.


your radio may have had a security code activated,if so it will not work until it is re coded.....hope this helps.....cheers

Aug 09, 2010 | Acura Integra Cars & Trucks

2 Answers

91 integra distributor


I am not sure but if all possible i would stick with the same model unit for best results

Oct 10, 2009 | 1991 Acura Integra Hatchback

1 Answer

Installing Halo Healdights on an Integra


Do this type of headlight appear on the certificate of homoglonation for your vehicle ,if not then do not fit because you could be prosecuted,also vehicle will not pass its annual vehicle inspection because the lights are not on the vehicle build certificate

Sep 15, 2009 | 1995 Acura Integra Coupe

1 Answer

95 Acura integra engine shutting off wile driving, but starts up after engine cools down.


your coil pac is breaking down when hot you will need to replace ignition coils

Jun 30, 2009 | 1995 Acura Integra Coupe

1 Answer

95 Acura Integra sedan, getting fuel and spark, but will not star


Verify engine has spark. Get a spark plug, and pull one of the wires our. Let it plug sit on the engine, and while cranking it look to see if it has spark. If not, then you will need to have the distributor checked. It could be the pick up coil, ignition module, or ignition coil. Each of which can be tested.

May 27, 2009 | 1995 Acura Integra Coupe

2 Answers

1995 Integra has no spark


put a timing light on any plug wire press the button or, turn on the timing light: if it flashes you have a good ignition circuit

May 24, 2009 | 1995 Acura Integra Coupe

3 Answers

95 Acura Integra starting problem


This happened to me on a 95 Integra GSR and the entire starter did not need to be replaced, just the solenoid pieces. They get old and worn down and the plunger no longer makes a good connection with them, hence the "click". Replace the solenoid panels and sand the plunger and your good as new. You can find instructions for this on the net, just do a search for it.

May 11, 2009 | 1995 Acura Integra Coupe

1 Answer

I just replaced cylinder head and now my car wont start up


Is timing correct?

First make sure you are getting spark.

Some questions you need to know are what year head is the LS. Did you use the LS Intake manifold and throttle body. Problem is if you didnt use a OBD1 LS and it is OBD2 or OBD0 The Throttle position sensor wont allow the engine to start. Same with the Distributor, because your crank angle position sensor is in your distributor and a OBD1 ECU can communicate withe OBD0 or OBD2

If it is all OBD1 Then I would do a compression and Cyl. Leak down test.

Nov 29, 2008 | 1994 Acura Integra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...