Question about 2000 Toyota Celica

1 Answer

I need to bleed my brakes but I'm not sure how it's done - could you please explain it to me? It's a 2000 Celica VVTL-I

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

As brakes are life/death,i am going to suggest you ask someone to SHOW you how (buddy up)then when you are confident you can do all the families cars.
I COULD GIVE YOU STEP BY STEP INSTRUCTIONS BUT ITS NOT THE SAME.....you will need another person to help anyway...

Posted on Aug 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 Buick Regal gransport and im needing to bleed front brakes only! How do i bleed front brakes and how am i sure i got all the air out of the lines?


Better read the book. It's a complicated process and isn't explained easily. You may be able to find a youtube explaination.

Feb 26, 2015 | Buick Cars & Trucks

2 Answers

I replaced the clutch master cylinder and the braided brake line in a 2000 camaro ss and I'm trying to bleed the system. I know how to do it but I've done the procedure 20 times and there is still no


You may have got a bad master cylinder.It happened to me before.I had to get 3 of them before i got a good one.Mine was on a full size jeep though.

Mar 21, 2013 | Cars & Trucks

2 Answers

2000 mercury cougar.....no brake paddle we replaced master cly,booster......what can it be


did you bleed all of the air from the master cylinder before you installed it, this has to be done. also when replacing the master cylinder, all 4 wheel cylinders will have to be bled, in order to get all of the air out of them. while doing the wheel cylinder bleeding , you will have to make sure that the master cylinder doe's not run out of brake fluid, check it each time you bleed a wheel cylinder , add brake fluid to the master cylinder each time or when it is getting low. hope that this has helped you.

Apr 16, 2011 | 2000 Mercury Cougar

1 Answer

How to replace front brake hose for 1989 toyota


I am always cautious when helping folks with brake issues. THEY ARE LIFE AND DEATH components. Please, If you have never done this proceedure before, and have a good knowledge of this area, consult a qualified technician; and YES, consider the brakes as a "Closed system", any breach of that system such as the removal of a hose, or line will require the purging of any air that is introduced, or brake failure is probable/likely.

Nov 26, 2009 | 1989 Toyota Celica Liftback

1 Answer

I need step by step instructions on how to bleed brakes on my 2005 toyota celica


If you don't have someone to help you you'll need to get a one man brake bleeding kit. The bleeding kit will take the place of the helper. IF you have a helper start with the rear passenger side wheel (furthest from master cylinder). Remove the wheel, have a helper sit in the vehicle and pump the brakes several times (motor off). Tell them to hold the pedal down while you open the bleeder screw. Tighten the bleeder screw before the helper releases the brake pedal to avoid sucking air back into the line. Repeat this process until the fluid flows out of the bleeder with no air. Then repeat these steps on each wheel. The order of bleeding is always furthest from the master cylinder. Rear passenger, rear driver, front passenger, and lastly front driver. After each wheel is done check the fluid level in the master cylinder and add as necessary. You don't want it to get low and **** air in from the cylinder.

Nov 06, 2009 | 2002 Toyota Celica

2 Answers

1994 Jimmy - Rear brakes are dominating after brake job


You need to bleed the whole system. Once this is done it should work better. Make sure you are not low on brake fluid. If the front brakes are disk brakes and the rear are drum breaks, the front really does most of the stopping, the back jjust keeps the car from spinning or swaying. But the main stopping power is in the front breaks. They need to be bled correctly, make sure brake fluid is up and make sure emergency break is not engaged. The emergency break uses a lever and cable to activate the rear brakes. The emergency breaks don't run off brake fluid...

please give good ratings, they are very important...

Aug 07, 2009 | 2000 GMC Jimmy

1 Answer

Front brake inbalance


Bleed your brakes first, and make sure no air in lines, second check the poportional valve located after the master cylinder. follow the lines from the master cylinder to find it, last but not least abs system, run diagnostics and the code should lead you to your problem, if yu want the factory service manuals with troubleshooting guides, go to alldatadiy.com and purchase a subscription, 20.00 and you will have all manuals on your car.

Dec 27, 2008 | 2000 Toyota Celica

1 Answer

I want to find out about servise for celica'00 vvtl-i


I have a Celica GT-S 2000 my car start but everytime I let the gas off the run shut off. The battary is good. Could any one let me know the problem could be.

Aug 12, 2008 | 2002 Toyota Celica

Not finding what you are looking for?
2000 Toyota Celica Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...