Question about Dodge Durango
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
SOURCE: i need a belt routing
Here's the standard belt routing for 5.7 Liter HEMI engine.
Please also check the under side of the hood and the radiator support area for the diagram.
Posted on Feb 01, 2011
Tips for a great answer:
Aug 17, 2016 | 2000 Nissan Quest
May 04, 2015 | Dodge Cars & Trucks
Oct 11, 2014 | 2000 Dodge Caravan
Jun 16, 2011 | 1999 Dodge Durango
Mar 15, 2011 | Dodge Ram Cars & Trucks
Feb 01, 2011 | 2004 Dodge Durango
Nov 02, 2010 | 1999 Dodge Ram
May 12, 2010 | 1998 Dodge Caravan
Jan 10, 2010 | 2002 Dodge Durango
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: