Question about 2002 GMC Savana

Open Question

Air bag light stays on,what could be wrong? - 2002 GMC Savana

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ndguy2481
  • 251 Answers

SOURCE: air bag light will not go off

u need to take it to a dealer and have them reset the air bag light

Posted on Nov 28, 2008

Ad
emissionwiz
  • 76118 Answers

SOURCE: air bag warning light staying on checked fuzes under bonnet ok

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to follow factory Airbag disarming protocol can result in an unexpected Airbag deployment and possible serious personnel injury or death.

Posted on May 20, 2009

  • 257 Answers

SOURCE: 2003 vw jetta air bag light stays on

You need to either have the dealer reset it or you can do it if you have VAG-COM. Vag-Com is a piece of diagnostic software that uses a special cable to hook up to your car. You can read/clear codes among a ton of other things. It's very common for VW guys to have. Much easier than going to the dealer if you can find someone close to you. The guys over at www.tdiclub.com are always more than willing to help out a fellow VWer. There is a list of guys with the software - you can actually do a search to see if there's anyone near you. www.vagcomlocator.com or go to www.tdiclub.com

Posted on Jul 11, 2009

  • 47 Answers

SOURCE: air bag light blinks then syays on

If you mean the passenger airbag light no longer lights up and airbag light on the dash blinks at start-up and then stays on; the read the below and check this site:

www.automotivehelper.com

I went to radio shack cost me $2.99 for 3 bulb packet. But the post below worked. It really didn't that long, pretty easy job. Took longer to find the tools. The first guys idea/fix, the second guy gave pretty good instructions. Just a little more detail: (3) the clips are one each side of the panel; (5) these two screws are on the inside lower part of module, (6) unclip the plastic tabs from the back (where the plug end is) first and it should lift up easily.

-------------
I had this happen on my 98 Ranger.(code 27) My light on the module that turns off the passenger side airbag was burnt out. I went to Radio Shack and bought a 12v light with wires attached and soldered them to the existing light.(didn't even take it out!) It fixed it!! Cost, about $1.50 and 20 minutes of fix time.

Note: If the light by the key switch to turn off the passenger side airbag does not work, it disables the entire airbag system! Hope yours is as easy to fix.

----------

gerg,

Thanks for your post. I have no way to read codes, but I heard the five tone alarm every time I started the vehicle and the passenger air bag off light did not light up. I was skeptical, but tried your advice and it worked.

Parts:
1) 12-volt colored lamp (Radio Shack part: 272-1099)

Tools:
1) socket set
2) philips head screw driver
3) soldering iron

Procedure:
1) remove ash tray from console panel
2) using a socket set, remove 4 hex head screws from console panel
3) pull console panel out of the two clips
4) remove connector from air bag key module in console panel and take console panel to a work bench
5) remove 2 philips head screws to remove the airbag key module
6) carefully unclip the plastic tabs that hold the airbag key module case together
7) remove connector circuit board from air bag key module
8) solder the yellow replacement lamp to the two solder pads for the original lamp on the back side of the circuit board (which wire to which pad does not matter)
9) tie the replacement lamp in place next to the original lamp
10) replace the circuit board in the airbag key module and snap the case back together
11) connect the airbag key module in the truck and start the engine to check that the lamp illuminates and that the alarm does not sound
12) screw the aribag key module back into the console panel
13) snap the console panel back into the truck
14) replace the 4 hex head screws
15) replace the ash tray

Posted on Nov 04, 2009

  • 1 Answer

SOURCE: air bag light stays on audi a4 2.8 quatro 1997

is thir a after markit radio

Posted on Nov 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

98 grand Cherokee air bag light stays on how can I reset it ??


means theres a code in air bag system, have it scan to see what is wrong.

Dec 30, 2016 | Cars & Trucks

1 Answer

Air bag warning light is staying on


it means the self test has detected an error, there is something wrong in the air bag system. it may no longer be functional. have a technician service it

Nov 20, 2016 | Cars & Trucks

1 Answer

2005 buick lacrosse air bag light stays on


Something is wrong in the system have it scanned and this will tell you what it is. Need to use airbag scanner

Aug 07, 2016 | 2005 Buick LaCrosse

1 Answer

How do i get my air bag sensor light to go off in my Ford Explorer Sport. The airbag sensor light stays on constantly, but the airbag has never deployed.


You need to have the system scanned. When the light is on there is something wrong with the air bag system. The air bag will not deploy when the system has a fault. This is something that is dangerous to drive that way because the vehicle is designed for that to go of in a crash, not to have you hit the air bag. If you have the codes retrieved as part of an estimate and post them I will tell you what to do to get the system back on line.

Jun 08, 2011 | 1999 Ford Explorer

1 Answer

Air bag light stays on


my air bag light stay s on ford escort 1998 vess zetec how do i put it out

May 16, 2010 | Cars & Trucks

3 Answers

What does the red light on the bord with letters SRS means? It stays on for few seconds after I start the car (Honda accord 1995). Thank you


srs means secondary restraint system. e.g air bags and things like that. when it stays on for a few seconds its because it is doing a systems check. if the light stays on all the time then there is a problem. hope i helped.

Jan 28, 2010 | 1995 Honda Accord

1 Answer

Air bag light stays on...


Either the system is off or a malfunction within the system

Oct 01, 2009 | 2003 Ford Ranger Regular Cab

1 Answer

Daewoo nubira - oil and air bag light problem


For your oil lamp, I will suggest you quickly attend to this as it may be telling you that there is not enough pressure in the system as the light will only turn off when there is enough pressure in the lubrication system. It might be a foulty oil pressure switch.
For your air bag, it might be just the passenger air bag module which hasn't been reconnected or a disconnected loom?
I'll suggest you bring it back to the electrician who's installed your A/C and let them fix it.
Cheers.

Nov 10, 2008 | 1999 Daewoo Nubira

Not finding what you are looking for?
2002 GMC Savana Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...