Question about 2006 Ford Freestar

1 Answer

Need to remove 2nd row seats in a ford freestar

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Adjust the seat so it's folded and upright. Near where the seat is attached to the floor is a "square shaped" metal bar (attack from the bak of the seat). Pull that bar to release the floor clamp. Note I had to lean the chair to about 45 degrees to get it to work. It took a fair amount of pulling and cursing. Now that it's out, I'm going to spray the clamp with a little WD40. Maybe next time it'll work more smoothly.

Posted on Feb 12, 2011

  • anna_michael
    anna_michael Apr 18, 2012

    uh...yeah...all the square shaped metal bar does is slide the seat forward and backward. And I also would like to know how the seat can be folded and upright at the same time prior to releasing the stupid thing from the floor.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I convert 2nd row captains chairs with either a jump seat in the middle, or switch to a bench?


Contact the service manager at your local Ford dealership; he or the senior master mechanic should be able to help.

Mar 24, 2015 | 2004 Ford Freestar SEL

1 Answer

How to remove 3rd row seat


If your Freestar is similar to earlier Windstars, third row seat removal is approached from the rear with the tailgate open. There are two latches at the bottom that pull up to release the seat from its locked position. You tilt the seat forward and pull up then pull the seat back toward you to release.

Dec 13, 2014 | 2006 Ford Freestyle

1 Answer

2nd row seat of my ford excursion seat went down but I can't get it to release and return to an upright position


cabling inside the seat is faulty ,,,,, nasty problem as you have to remove upholstery to repair it ,,,,,

Dec 06, 2013 | 2002 Ford Excursion

2 Answers

How to release tether holding spare tire


There is a lug wrench in the rear acess panel that holds the jack and wrench. Depending on your van, either lift up on the cargo bin door in the rear and you will see a hex shaped nut or in the 2nd row seats there is a little circle that is cut out of the carpet with the same hex shaped nut undeerneath. Use the lug wrench and turn the nut counterclockwise to lower the spare tire to the ground....Mike

Jul 11, 2011 | 2005 Ford Freestar

1 Answer

Where is the fuse for the blower fan motor on a 2005 Freestar van


IT IS IN THE ENGINE COMPARTMENT IN THE FUSE BOX ON THE RIGHT HAND SIDE AND THE FUSE IS TOWARDS THE BACK OF THE BOX ON THE LEFT SIDE OF IT IN THE 2ND ROW FROM THE BACK OF THE BOX AND IT IS THE 2ND FUSE OVER FROM THE LEFT IN THAT ROW. IT IS LABLED F7 AND IS A 30 AMP FUSE FOR AUXILLIRY BLOWER MOTOR RELAY. ALSO, THERE IS ANOTHER ONE IN THE FIRST ROW IN THE BACK OF THE BOX AND 2ND OVER FROM THE RIGHT AND IT IS LABLED F14 AND IS A 30 AMP FUSE FOR THE FRONT BLOWER MOTOR RELAY.

Dec 08, 2010 | 2005 Ford Freestar

1 Answer

How do you remove the right rear panel that covers the rear A/C?


fold 2nd row seat fwd, remove rear 3rd seat if equipt.,remove carpet,access screws etc. remove window trims as required,remove panel.....GL...

Jul 04, 2009 | 2004 Ford Expedition

1 Answer

2nd Row Seat will not attach to floor


EITHER THE SPRING HAS GONE OR THE LITTLE V GROOVE IS TOO BADLY WORN, EASIEST THING IS TO REMOVE SEAT, TURN UPSIDE DOWN TO REVEAL THE PROB, IF IS THE V WORN, SIMPLY FILE THE PROFILE BIGGER

Feb 26, 2009 | 2003 Ford Explorer

Not finding what you are looking for?
2006 Ford Freestar Logo

Related Topics:

2,975 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...