Question about Ford Escort

1 Answer

Rear brake drum turns BUT it is impossible to get it off.i'mm assuming it's not the e-brake frozen, since the drum turns.just cannot get it off.have tried a puller-have tried whacking the hell out of it.any other ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

SOME FORDS VECHICLE HAD A GREASE CAP REMOVE IT THEN REMOVE COTTER PIN AND NUT LOCK AND NUT.THEN REMOVE THE BRAKE DRUM WITH WHEEL BEARINGS.

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i find the transmission type for a Kangoo 1.4 automatic


Renault Kangoo (KC) 1.4 i car data and specifications. Renault Kangoo (KC) 1.4 i car information and specs Bodywork Bodywork type Minivan Length (mm) 3995 Height (mm) 1827 Width (mm) 1663 Number of seats 5 Number of doors 4 Wheelbase (mm) 2600 Track rear (mm) 1418 Track front (mm) 1405 Ground clearance (mm) 140 Total (curb) weight (kg) 1155 Gross (max.) weight (kg) 1665 Max. cargo capacity (volume) 2600 Min. cargo capacity (volume) 650 Tires 165/70 R14 T Engine Engine displacement (cm3) 1390 Engine location Front, transverse Cylinder type In-line Bore (mm) 75.8 Number of cylinders 4 Compression ratio 9.5 Stroke (mm) 77 Valves per cylinder 2 Turbo - Fuel supply Distributed injection Engine power (hp) 75/5500 Engine torque 114/4250 Transmission Wheel drive Front Number of gears (automatic transmission) 4 Steering Type of steering Wheel-rail Power steering Hydraulic system Brakes Brakes rear Drum brakes Brakes front Ventilated disc brakes ABS + Performance Acceleration to 100 km/h 17.3 Fuel capacity (l) 50 Fuel consumption - city (l) 9.5 Fuel consumption - road (l) 6.3 Top (maximal) speed (km/h) 147

Renault Kangoo (KC) 1.4 i car bodywork specifications: Renault Kangoo is a minivan with 5 seats and has 4 doors. Dimensions information of car: 3995 mm long, 1827 mm high, 1663 mm wide. Other Renault Kangoo (KC) 1.4 i cars specs: 2600 mm wheelbase, rear track has 1418 mm, front track has 1405 mm, ground clearance - 140 mm. Total car weight is 1155 kg and 1665 kg of maximum weight, cargo capacity (volume) if from 650 to 2600. Tires type for Renault Kangoo (KC) 1.4 i is 165/70 R14 T. Car engine specifications: 1390 cm3 displacement, located front, transverse with in-line cylinders, 75.8 mm bore. Renault Kangoo (KC) 1.4 i has 4 cylinders. More car engine information: 9.5 compression ratio, 77 mm stroke, car has 2 valves per cylinder, distributed injection fuel supply type, engine power 75/5500 hp, engine torque equals 114/4250.
Transmission specifications of Renault Kangoo (KC) 1.4 i wheel drive is front, it has 4 gears of automatic transmission,.
Renault Kangoo (KC) 1.4 i has wheel-rail type of steering. And hydraulic system power steering.
Rear brakes are drum brakes. Front brakes specs: ventilated disc brakes.
Performance Renault Kangoo car data: it takes 17.3 sec. for Renault Kangoo (KC) 1.4 i to get 100 km/h speed. 147 km/h is the max speed. Renault Kangoo gasoline tank has 50 liters capacity. The car consumps 9.5 liters in the city, 6.3 liters on the road.


TMTM

Jun 28, 2014 | 2003 Renault Kangoo

2 Answers

Rear brakes


Removal
1.Remove rear wheel and tire assembly from vehicle.

2.Remove rear brake drums from hub and bearing assemblies after loosening the two brake drum screws.
bj6c017a.gif
3.Be sure that the parking brake pedal is in the release(most upward) position.

4.Completely loosen square nut of the rear parking brake cable. Then create slack in the rear parking brake cables.
bj6c017b.gif
5.Remove adjuster spring from adjust lever and brake shoe.
bj6c017c.gif
6.Remove adjust lever and turn the adjusting wheel of adjuster assembly to the direction of the arrow as shown.
bj6c017d.gif
7.Remove the strut spring and the lower retracting spring from the brake shoe.
bj6c017e.gif
8.Remove the upper return spring from the brake shoe.
bj6c017f.gif
9.Remove brake back plate hold down spring and pin from the leading brake shoe assembly.

10.Remove the leading brake shoe. Then remove the adjuster assembly, strut and anchor spring from the trailing brake shoe.
bj6c017g.gif
11.Remove the trailing brake shoe from the brake back plate after removing hold down spring and pin.
bj6c017h.gif
12.Remove the trailing brake shoe from the rear parking cable.
bj6c017i.gif
13.Remove parking pivot lever from the leading brake shoe.
bj6c017j.gif
Replacement
1.Lubricate the eight shoe contact areas on the back plate and anchor.
bj6c017n.gif
2.Install the trailing brake shoe to the rear parking cable.

3.Install trailing brake shoe on brake back plate and install the trailing brake shoe hold down spring and pin on the brake shoe.

4.Tighten the square nut of rear parking cable.

5.Install the anchor spring then install adjuster assembly, and strut.

6.Install leading brake shoe on brake back plate.
bj6c017o.gif
7.Install the brake shoe upper return spring, strut spring and the lower retracting spring to the brake shoe.

8.Properly rotate the adjusting wheel of adjuster assembly to the direction of the arrow in as shown.
bj6c017d.gif
9.Install the adjuster spring on the adjust lever and leading brake shoe assembly.

10.Install the leading brake shoe hold down spring and pin on the brake shoe.
bj6c017q.gif
11.Adjust brake shoes assemblies so as not to interfere with brake drum installation.

12.Install the rear brake drums on the hubs.

13.Check and adjust whether the pedal stroke in the specification.(Refer to section BR Gr./On-vehicle service/Pedal stroke of parking brake)

14.Install wheel and tire.

15.Push the parking brake pedal to the floor once and release pedal. This will automatically remove the slack from and correctly adjust the parking brake cables.

16.Test the vehiche on the road. The adjust will continue the brake adjustment during the road test of vehicle.

Inspection
1.Inspect the disassembled parts for wear, rust or damage.

2.Measure the thickness of brake shoe lining.
Standard : 0.17 in (4.5 mm)
Minimum : 0.04 in (1 mm)

3.If the shoe lining is less than minimum or shows signs of uneven wear, replace new one.
bj6c017k.gif
4.Measure the inside diameter of the brake drum.
Standard : 10 in (254 mm)
Maximum : 10.07 in (256 mm)
bj6c017l.gif
5.If the inside diameter of the brake drum is more than maximum or shows signs of uneven wear, replace new one.

6.Inspect the lining and drum for proper contact. If the contact condition is improper, repair it with a grinder or replace the brake shoe assembly.
bj6c017m.gif

Aug 14, 2013 | 2002 Kia Sedona

1 Answer

Frozen brake drum on a 1950 packard


There is no such tool, you just do whatever it takes to get the drum off, back off the shoes, soak it with WD40, heat it up, hit with a dead blow hammer and so on.

Oct 22, 2012 | Cars & Trucks

1 Answer

Drum removal 02 tundra


You can use two 8 mm bolts in the drum by just turning them in till the drum becomes free. Note make sure that the emergency brake is off...

Aug 02, 2012 | 2002 Toyota Tundra

1 Answer

How to change rear barke shoes


Brake Drums & Brake Shoes Removal & Installation To Remove:
Rear Drum Brakes kia-09-18-7627.gif

  1. Raise and safely support rear of vehicle.
  2. Release parking brake.
  3. Remove rear wheel assemblies. NOTE: If brake drum is stuck, install two 8 mm bolts into threaded holes and tighten evenly.
  4. Remove top return spring, front and rear shoe spring clips and hold-down pins.
  5. Remove anti-rattle spring and adjuster spring. NOTE: Note position of operating lever prior to removal.
  6. Remove bottom return spring.
  7. Remove clip and washer and detach parking brake cable from rear shoe.
  8. Remove brake shoes.
To Install:
  1. Lubricate all brake shoe contact points with appropriate grease.
  2. Place operating level into position on hub.
  3. Install rear brake shoe and connect parking brake cable to rear shoe with washer and clip.
  4. Install front brake shoe and install bottom return spring.
  5. Install hold-down pins and spring clips.
  6. Position operating lever and install top return spring.
  7. Install anti-rattle spring and adjuster spring.
  8. Install brake drum and screws.
  9. Adjust brakes and install rear wheel assemblies.
prev.gif next.gif

Jan 21, 2011 | 2003 Kia Spectra

1 Answer

Back Tire on 1997 Nissan Quest xe is smoking from rear tire and smells like rubber burning.


Sounds like you have a brake or wheel bearing seized on that vehicle, best to let it completely cool off before attempting anything.
jack rear tire and support with jack stand, try turning the tire by hand once its off the ground, if it turns or doesn't turn either way you must pull the wheel and determine what the cause is or was for all that smoke and smell.
Pull the brake drum and check the wheel cylinder for leaks and if it is frozen holding the rear brake locked on that side if it is replace the brakes both rears and wheel cylinders both rears and the appropriate brake drums if they are worn out and heat cracked.
If the brakes appear to be hanging due to the emergency brake hanging up, spray the emergency cables, try to adjust the cables after you replace the brakes, bleed and adjust the system and walla you are safe and sound.
If you have a frozen wheel bearing you must remove the frozen bearing off the rear spindle stub shaft, either bty heat or impact chisel, check spindle for signs of wear if ok just lightly sand with 180 wet/dry paper, pull out the bearing and punch out the inner outer races along with the inner grease seal and replace all five items, repack the bearings and hub with a high temp resistant wheel bearing grease, re install the brake drum re install the hub nut and cotter pin to a proper torque and walla... Happy Motoring!!

Jun 12, 2010 | Cars & Trucks

2 Answers

To adjust back brakes


The best method for adjusting your rear brakes assuming that they are of drum type, is to jack up the rear axle one side at a time and remove the rubber cap on the inner brake plate.Block your front wheels forward and rear. Then with a brake adjustment tool available at most auto part stores, turn the adjuster in the "only" direction that it will turn. The vehicle must not be in park to do this, so make sure she's on level ground. Once you've done this, spin the tire of the wheel you are working on and adjust the brake until you feel a slight drag on the tire. You can also listen to hear the brake shoue touching the drum. You also might want to have someone press the brake pedal occasionallly to "center" the the shoes. Thank you, Dana

Mar 04, 2010 | 1999 Chevrolet Malibu

1 Answer

How do you 'back-off' the rear brake shoes??


what do you mean frozen? is it cold or old rusted? if it is cold take a hammer and hit the drums until the shoes free up.and stop putting on the emergency brake in the winter.adjust the adjustment wheel until the drum turns,if it will not turn adjust it the oppisite direction.

Jul 23, 2009 | 2004 Pontiac Grand Am

1 Answer

Rear passenger side wheel won't turn


sounds like you left the handbrake on in very low temperatures and the moisture has frozen the shoes to the brake drum .....can you get vehicle into a garage to warm up?? if not use a can of de,icer and spray the rear of the wheel not the front and hopefully some will enter the drum and release it.Do you have a blowtorch for plumbing ,if so gently try warming the drum up slowly as this can cause the drum to crack if not done right.Have you tried going in reverse ???this often frees a frozen brake especially in conjuction with a spray of de.icer

Dec 23, 2008 | 2001 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...