Question about 1999 Oldsmobile Intrigue

1 Answer

1999 oldsmobile intrigue, secondary air injection problem, what could it be? Service engine light comes on and off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 4,336 Answers

Pull the error codes and investigate what they indicate.

Posted on Aug 22, 2010

  • emamam3 Aug 22, 2010

    the error code stated it was a secondary air injection problem, so does that mean the air pump is bad? We checked the relays

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a service engine soon light on and have hooked up an OBD11 reader to it and got code P0410 pertaining to a secondary air injection problem. hoses are fine, pump is new.


P0410 Oldsmobile - Secondary Air Injection System Malfunction

Possible causes: - Faulty Vacuum hoses damaged
- Faulty Air Pump inoperative
- Air bypass solenoid harness is open or shorted
- Air bypass solenoid circuit poor electrical connection
- Air bypass solenoid leaking/blocked or stuck open/closed
- Air diverter valve leaking/blocked or stuck open/closed

Tech notes: Visually inspect AIR pump and AIR bypass valve harness and connector, if connector are OK, then replaced AIR bypass valve.

When is the code detected? The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system.

Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

P0410 Oldsmobile Description An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
P0410 Oldsmobile Secondary Air Injection System Malfunction

May 30, 2015 | 2001 Oldsmobile Intrigue

1 Answer

I replaced my secondary air check valve on my 2001 chevy tahoe but code 1416 still comes up. what else can i check


here is what i found on p1416.



P1416 Chevrolet
P1416 Chevrolet - Secondary Air Injection System Bank 2
Possible causes
- Faulty Secondary Air Injection (AIR) pump
- Secondary Air Injection check valve bank 2
- Secondary Air Injection (AIR) pump electrical circuit fault
- Blocked Secondary Air Injection (AIR) system

When is the code detected?

The P1416 code is set when no O2 sensor voltage change is detected by the Engine Control Module (ECM).


Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)


P1416 Chevrolet Description
An Secondary Air Injection (AIR) pump is used on this vehicle to lower tail pipe emissions on start-up. The PCM supplies a ground to the AIR pump relay, which energizes the AIR pump. The Powertrain Control Module (PCM) monitors the HO2S voltages to diagnose the AIR system. During the AIR test the PCM activates the AIR pump during closed loop operation. When the AIR is activated, the PCM monitors the HO2S voltages and short term fuel trim values for both banks of the engine. If the AIR system is operating properly, the HO2S voltages should go low and the short term fuel trim should go high.

Jan 23, 2014 | 2001 Chevrolet Tahoe

2 Answers

What does this code mean? P0410


Diagnostic Test Code (DTC) P0410 indicates that your secondary air injection system is not functioning properly.
Not all 2001 Chevrolet Bazers are equipped with secondary air injection. The secondary air injection system was added to vehicles that were to be sold in certain areas where the emissions laws required it, like the State Of California.

The Powertrain Control Module (PCM) monitors the system by commanding the secondary air blower motor to run and the air injection solenoid to open. This causes additional oxygen to enter the exhaust system. The PCM then monitors the signal from the oxygen sensors to see if the commanded air has in fact, entered the exhaust system. Code P0410 sets when the PCM has commanded the blower motor on and the solenoid open and there is little or no change in the oxygen sensor signal.

GM has had some problems with these systems and there has been a Technical Service Bulletin (TSB) issued that addresses some of the known concers. Below is a brief description of the TSB and the issues involved.

Bulletin No.: 04-06-04-015A
Date: November 28, 2006
TECHNICAL
Subject:
LN2, L43 or L35 Engine SES/MIL Light Illuminated, AIR Pump Ingesting Water and DTC P0410 Set (Replace AIR Pump and Inlet Hose Assembly)
Models:
1999-2003 Chevrolet Blazer, S10
1999-2001 GMC Jimmy
1999-2003 GMC Sonoma
1999-2001 Oldsmobile Bravada
with Vortec 2.2L I4 or 4.3L V6 Engine (VINs 4, 5, W - RPOs LN2, L43, L35)
Condition
Some customers may comment on the SES/MIL light being illuminated. Upon investigation, the technician may find a DTC P0410 indicating that there is a concern in the secondary air injection system.
Cause
Water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump.
Correction
Replace the AIR pump and install a new inlet hose and solenoid tube assembly...

The bulletin goes on and gives detailed information on how to perform the repair and the part numbers of the replacement parts needed to do so. Your local dealer can provide the parts for you and you can probably get them to print out a complete copy of the bulletin for you. It is not really hard to do if you want to do this yourself.

Sep 01, 2011 | 2001 Chevrolet Blazer

1 Answer

What are the possible causes for code number p0410 on my 1999 oldsmobile cutlass?


Thats the code for "secondary air injection". Very hard to track down the source. Could be broken wire, rotton vacuum lines, bad "egr" valve, bad control unit (on backside of engine facing firewall).
If the engine light is on, try disconnecting the control unit on back of engine, passenger side connector. If the engine light is not on, I would not worry about it, unless you have lots of money to throw at it!!

Aug 23, 2011 | 1999 Oldsmobile Cutlass

1 Answer

1999 Olsmobile intrigue.The service engine light is always on.The engine runs perfectly fine.However it does have an exhaust leak.Would that trigger the light to come on,or would it be ome kind of...


if you have an exaust leak it can set a code
due to the O2 sensor will no get the correct reading and it will be out of the range
so yes it would set a code
hope this helps
please give feed back
good luck

Jan 23, 2011 | 1999 Oldsmobile Intrigue

1 Answer

I took my 1999 oldsmobile intrigue to goodyear because of engine light on . They said that i had a misfire in cylinder 1 and a secondary air injection problem . The person found that i had a bad intake...


Sounds like a lot wromg for a car that's only 11 years old. Unless you have a lot of mileage or drive it rough I'd get another opinion from a qualified mechanic.

Nov 15, 2010 | Oldsmobile Intrigue Cars & Trucks

1 Answer

Check Engine ight


Hello there:
Here is the code
P0410 Secondary Air Injection System Malfunction
It is another air pump that pushes air into the exhaust so the cats can burn more pollution.. It does not affect drive train, just emmisions it shouldnt cost about $400 if it is the air pump, Unless there is a secondary problem, ok?
Hope this helps you out
Best regards Michael

May 30, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Obd code of p0411 on a 1999 ford mustang 3.8 v-6 what do I check to correct


That's s failure of the secondary air pump. It'll have to be changed. It's an emissions component meant to help with cold start emissions. It won't cause engine running trouble but at inspection time you'll fail for smog. Change it before then and you'll be fine.

May 16, 2010 | 1999 Ford Mustang Cobra

1 Answer

Secondary air injection malfunction


There are two solenoids and a blower in this system. The solenoids/vales fail as they get older and corrode. They blower also can fail.
This system runs when the engine is cold to inject air into the exhaust. First make sure the blower is running and then look to see tha the valves operate.
This system has no effect on the performance of the car and some people choose to ignore it.

Aug 30, 2009 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...