Question about 2001 Dodge Durango

1 Answer

How to replace a cam position sensor? - 2001 Dodge Durango

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

On ohc the cmp is located on the cylinder heads near the camshaft. on some ohc the cmp is located at the timeing belt end of the engine. on others it is located at the timing belt end of engine.on ovh engines, the cmp is located in one of two spots . on some if it was designed to use a distributor it is inside the distributor or inside a disributor like housing that is instaled at the same location as the distributor. on other ohv engines it is on the timing chain cover at the front or the engine near the camshaft

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No fire to coils after cam position sensor replaced in 2001 Audi a6 quattro


Throwing any codes? Crank sensor working? The cam and crank sensors typically work together to adjust timing.

Aug 02, 2016 | Audi Cars & Trucks

2 Answers

Pcm?


PCM= Powertrain Control Module. It is the brains of the car, it reads the sensor in put from all sensors including the cam shaft position sensor

May 14, 2014 | 2004 Toyota 4Runner

1 Answer

When replacing the cam position sensor I see Oil in the cam position sensor port


get an OFFICIAL diagnosis from someone with a much more sophisticated reader. It doesn't have to be the dealer... just a good mech that specializes in GM

Mar 25, 2014 | 2007 Pontiac G6

1 Answer

Where is the cam position sensor on a 2003 nissan maxima and is it hard to replace?


The camshaft sensor is positioned on the end of the cylinder head.

___________________
Allobd2.com

Jun 19, 2012 | Cars & Trucks

1 Answer

Need to know what dodge codes P0325, P0344 & P0340 mean


0325 knock sensor
0344 cam position sensor intermittent
0340 cam position sensor failure

I would replace the cam position sensor from the codes you provided. The knock sensor
would most likely be related to the sensor failure.

Jun 28, 2011 | Dodge Neon Cars & Trucks

1 Answer

Cam position sensor broke


ok easy fix. this is common on ALL ford w this style cam sensor,3.0 eats them for lunch. the sensor base has bushings like a real distributor, they get wore and fail. you can get new from ford, or reman at auto parts about 100 bucks. they come w the sensor installed but as with either, you need the allginment tool, looks like a little hockey puck, that only come from ford to set up or check engine light wont shut off. it will run without this but poorly. if you need more advice just post a comment to this and ill do my best to advise you

Sep 03, 2009 | 1998 Ford Explorer

2 Answers

2005 ford excursion cam sensor location I need to change the cam sensor and the crank sensors on my excursion and i do not know where they are located


On my 02 Excursion with the 7.3L Diesel, the Cam Position Sensor is located at the front bottom of the engine on the passengers side. There is one electrical pigtail plug that is attached and one bolt holds the sensor in position. It may be located in a similar location on your 05 Ex. I do not know where the crank sensor is located. I hope this helps.

Aug 27, 2009 | 2005 Ford Excursion

1 Answer

Camshaft


Most likely yes. It's not that the cam is out of position (that's controlled by the timing belt, so as long as the belt hasn't slipped, the cam is where it should be). What's more likely is that the cam sensor has gone bad, as you're suggesting, and it's not able to tell the computer the position of the cam, or it's telling the computer that the cam is in a position that the computer knows it can't be.

Replace the cam sensor and you'll be fine.

Aug 30, 2008 | 1999 Hyundai Sonata

Not finding what you are looking for?
2001 Dodge Durango Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...