Question about 2004 Kia Sedona

1 Answer

Engine Mechanical problem 2004 Kia Sedona 6 cyl Front Wheel Drive Automatic 100K miles the mpv has a 2.5L, Problem: 1) when press a little hard at the pedal to make the car move, the engine shake hard. however in idle the engine run smoothly. 2)engine jerking when start acceleration (after the mpv had move) Error code detected: P0150 - O2 sensor circuit malfunction (B2S1) is it have any thing to do with the valve control?

Posted by on

  • zulanders Aug 23, 2010

    can anyone guide me where is the sensor located(with visual aid if possible)? what the sensor look like?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 5,763 Answers

Nothing to do with valve control but o2 sensor should be replaced and also sounds like the engine is misfiring when gas is applied, this may be caused by a bad coil or sparkplug.when was your last tune up?, i would replace sensor and also make sure there are no other codes , even check for history codes.

Posted on Aug 22, 2010

Testimonial: "the tips given is a best start! hope it will solve my problem"

  • zulanders Aug 23, 2010

    would you mind telling me where the sensor located and what the sensor look like?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 kia sedona number 1cylinder ft head or rear 3.5 ltr


on all v-6 v-8 engines the number one cyl is the furthest forward valve cover. one valve cover will be built closer to the front of the engine this is always # 1 cyl firewall side is 1,3,5,
radiator side of engine is # 2,4,6, cyl. so number 1 is the rear forward cyl

Aug 31, 2012 | Kia Sedona Cars & Trucks

1 Answer

.need to find number 2cylinder 0n 05 kia sedona 3.5


Looking at engine , number 1 cyl left front,number 2 left middle,3 left back
Number 4 right front,5 middle right ,6 back right

Dec 07, 2011 | 2005 Kia Sedona

1 Answer

Need firing order 3.5 kia sedona


Firing order 1 > 2 > 3 > 4 > 5 > 6
Looking at engine: Number 1 cyl left front
Number 2 left middleNumber 3 left back
Number 4 right front
Number 5 middle right Number 6 back right

Dec 07, 2011 | 2005 Kia Sedona

1 Answer

Is their a better manufactured front wheel bearing for my 2004 kia sedona mpv 2.9 crdi chassis up751 j3 engine than the kia manufactured original.


"Better Manufactured" is a subjective term. All bearings are manufactured pretty much the same, it is the quality of the components that differentiates them. The issue is with design. The bearings are designed to fail because they are sealed and cannot be re-lubricated. If you are looking for a quality aftermarket, I use Timken and haven't had a single issue with any Timken product I've installed in customer's vehicles.

Nov 04, 2011 | 2004 Kia Sedona

2 Answers

I NEED A FIRING ORDER DIAGRAM FOR A 3.5 KIA SEDONA I HAVE TROUBLE CODES 302 AND 306 AFTER COILS,PLUGS AND WIRES WERE REPLACED


Firing order 1.2.3.4.5.6
Looking at engine , number 1 cyl left front,number 2 left middle,3 left back
Number 4 right front,5 middle right ,6 back right
Fault codes indicate missfire cylinder 2 and 6

Jul 27, 2010 | 2004 Kia Sedona

1 Answer

2004 Buick Rendezvous 6 cyl Front Wheel Drive speed and rpm issue


you have a connection problem going to your intrument cluster unless your real handy working on auto`s better take it to a mechnic

Oct 25, 2009 | 2004 Buick Rendezvous

1 Answer

2004 mazda MPv Where is the location of cyl. #6?


The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.

Jun 08, 2009 | 2004 Mazda MPV

Not finding what you are looking for?
2004 Kia Sedona Logo

807 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...