Question about Chevrolet Silverado 1500

2 Answers

The LED display on the DIC of my 2004 Silverado is lit up solid and says on with the ignition off

Posted by on

  • txncpo Aug 22, 2010

    Raining here, took me a minute to get to it. Pulled fuse and DIC came back, a trip to 7-11 later (20 minutes) it all went blank, instrument cluster (speed/temp/oil pres) can;t say for sure if when the DIC originally went out if the speed etc. didn;t work. May have been to focused on LED. Pulled fuse and put right back in (with ignition off) and all came back. I'm thinking I have an intermentent(sp) problem with my intrument cluster module?, right now working so I can't fix what ain't broke.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

The body control module is not kicking it off

Posted on Aug 22, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! As a first course of action I strongly suggest that you remove the positive battery connector and let it sit for atleast 5mins, this should reset the system and may resolve the problem. Do you have any unusual feeling when stepping on the gas pedal? Please write back on the progress. Hope this helps and thank you for using FixYa!

Posted on Aug 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the low kefob battery on the DIC of a 2004 silverado


Had the same problem with my 2004 Tahoe. I turned the ignition to the run position (don't crank motor), when the warning came on I held the unlock button on the key fob until the warning was removed. I took out the key, locked then unlocked the door. When I put the key in the ignition, the warning doesn't come on anymore. Hope this helps.

Nov 18, 2016 | 2004 Chevrolet Silverado

1 Answer

Recently changed the oil for my 04 silverado, but the change engine oil warning will not go off, how do i correct this


After changing the oil and filter, reset the monitor by proceeding as follows:

Turn ignition On, but do not start engine.

Fully depress and release accelerator pedal three times within five seconds.

If CHANGE ENGINE OIL lamp flashes for five seconds, this indicates system has reset.

Start engine. OIL LIFE should change to 100%.

If CHANGE OIL SOON lamp lights again, repeat reset procedure.

2001-08 Silverado, w/Driver Information Center

Turn ignition On, but do not start engine.

Press MODE button until DIC (Driver Information Center) reads OIL LIFE LEFT/HOLD SET TO RESET.

Press and hold SET button until 100 percent is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.

Turn ignition Of


how to reset oil life on 2004 chevy silverado

Nov 10, 2016 | Cars & Trucks

1 Answer

How to troubleshoot IPC/DIC


make sure you have power and ground at the ipc connector, if you do, cluster needs to be replaced. If you don't have power and ground, start looking for open wires.

Oct 11, 2015 | 2004 Chevrolet Silverado

1 Answer

Remove "Service Tire Monitor" message permanently


chances are if it shows on the dash , it has it installed ( TPMS )

Feb 28, 2014 | 2004 Chevrolet Silverado 2500HD

1 Answer

Where is the fuel reset button for a 2004 Chevrolet Silverado 2500 HD 6.0 L fuel injection?


For vehicle with steering wheel conrtols ,to reset the fuel,Press and hold the select button for five seconds while the fuel filter life message is displayed . The message will appear on the DIC for ten second
For vehicle without steering wheel control ,do the following, without pressing the pedals,turn the ignition key to the on position without starting the engine ,wait five seconds,completely press the the brake and the accelerator pedal simutaneously, and hold for ten seconds ,the system is now reset ,
The next time the engine is started the message will no longer be displayed, Always reset after a fuel filter change

Mar 03, 2012 | 2004 Chevrolet Silverado 2500HD

1 Answer

GMC 07 Serria backup sensor will not work. I had a new bumper installed. At first it beeper all the time. Now it will not come on. The DIC shows park assist off.


#PIT4878: Service Park Assist Message / LEDs Stay On Or Inop - keywords B0968 inoperative lamp led light lit module reverse urpa - (Jun 12, 2009) 999999995.gif Subject: Service Park Assist Message/ LED's Stay On or Inop Models: 2007-2009 Chevrolet Silverado 2007-2009 GMC Sierra With RPO UD7

The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern: Some customers my comment of a Service Park Assist Message on the DIC and/or the LED indicators at the right rear pillar staying on or inoperative. This concern could be caused by the wiring harness to the LED indicators being pinched under a ground eyelet at the right rear pillar, as shown below.

2290161.gif
other issues could be the problem such as poor connections at each sensor or damaged sensors. to clear URPA codes,place ignition in run,(engine OFF),shift into reverse and turn key OFF.place shift lever into park and retest operation of URPA. if still inop URPA code(s) need to be retrieved before further diagnosis can be accurately done.

Sep 15, 2011 | 2007 GMC Sierra 1500

1 Answer

Park assist warning came on.


{: ) SERVICE PARK ASSIST The driver information center (DIC) displays SERVICE PARK ASSIST when the park assist module detects a malfunction in the object detection system and sends a request to the DIC for display of the message. The DIC also displays SERVICE PARK ASSIST when there is a loss of communication with the park assist module.
PARK ASSIST OFF The PARK ASSIST OFF message is displayed in the DIC when the park assist system is disabled due to conditions that disable or inhibit the system. The red LED in the rear display, as well as, the telltale in the switch will be lit, notifying the driver the PARK ASSIST system is disabled. The object alarm module requests the DIC via the serial data circuit to display PARK ASSIST OFF when it detects that one of the following conditions is true:
• The object alarm system is disabled through DIC vehicle customization feature. Refer to the Owners Manual for more information. • An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, or hitch receiver. • An object is hanging out of the endgate. • The park brake is not fully released. • The system receives vibrations from a large nearby vehicle or from a heavy equipment such as a jackhammer. In the case of objects attached to the rear of the vehicle such as a trailer, hitch receiver, or a bicycle rack, or objects hanging out of the endgate, the rear parking assist (RPA) will have an Automatic Object induced disable feature where the RPA will determine if the rear object is moving with the vehicle. If the RPA detects such a condition, the park assist will be disabled. The PARK ASSIST OFF message will continue to be displayed until the trailer hitch receiver is removed and the vehicle is driven forward above 24 km/h (15 mph).

Feb 07, 2011 | 2007 GMC Yukon Denali

1 Answer

What does a c on the dic mean?


Your vehicle has a Driver Information Center (DIC).
All messages will appear in the DIC display located
below the speedometer in the instrument panel cluster.
The DIC buttons are located on the instrument panel,
to the left of the instrument panel cluster.
The DIC comes on when the ignition is on. After a short
delay, the DIC will display the information that was
last displayed before the engine was turned off.
The DIC displays trip, fuel, and vehicle system
information, and warning messages if a system problem
is detected. The bottom line of the DIC shows the
shift lever position indicator. See Automatic
Transmission Operation on page 3-23
for more
information.
If your vehicle’s DIC has these features, the compass
direction and the outside air temperature may also
display on the DIC when viewing the trip and fuel
information. The compass direction appears on the top
right corner of the DIC display. The outside air
temperature automatically appears in the bottom right
corner of the DIC display. If there is a problem with the
system that controls the temperature display, the
numbers will be replaced with dashes. If this occurs,
have the vehicle serviced by your dealer/retailer.
The DIC also allows some features to be customized.
See DIC Vehicle Customization on page 4-66 for
more information.
DIC

Sep 05, 2010 | 2002 Buick Rendezvous

1 Answer

Service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to...


oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 08, 2009 | 2004 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...