Question about 2000 Honda Accord

1 Answer

I drive a honda accord v6 2000 model. the engine is in good shape but the braking is very poor. It is very dull to response and at times i fear it may fail.. i have changed the brake pads but still it is not working well. what do i need to do about the brake?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 6,826 Answers

Bleed the brakes on all four wheels, and if the rear brakes are drums, adjust the shoes so they are tighter against the drum for better braking overall.

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought my first car 1998 honda accord did a complete tune up but it vibrates when idle but run smooth.


some hondas have a counter balance shaft on lower part of the engine (marks should be lined up when replacing timing belt ) someone may have replaced timing belt and missed aligned them

Feb 28, 2015 | 1998 Honda Accord

1 Answer

My 1994 Honda Accord Lx running richemission: failed emission test.


When the mechanical timing "slipped" the valve timing was affected. Valves can be bent if they strike a piston. Have a compression test performed on each cylinder. If the compression is low on any cylinder, likely the cause is a bent valve caused by the mis-timed engine. The cylinder head will have to be removed and the bent valves and valve guides replaced as part of a "valve job."

Feb 10, 2015 | 1994 Honda Accord

1 Answer

99 Honda Accord EX V6 check engine light comes on and blinks ten times when I start the car along with the SRS light being on for a short period of time. The other problem has been the car shutting off...


Your vehicle may be part of a 2002 honda/acura recall. Faulty ignition switch!! Typical symptoms are: Random stalls, hard start, no spark, power loss (symptoms progress in hotter weather). When the vehicle stalls/shuts off while in motion, usually the speedometer drops to "0" while in motion. Some warning light not lit when ignition is set to "on" (chk engine/ABS/Brake etc.). Call your local dealer with your VIN# on hand and check if your vehicle is part of the recall. Refer to faulty ignition switches, affected years (1998-2002 models), accords/preludes/pilot/Odyssey/Civic/CR-V and various Acura models.

Oct 01, 2010 | 1999 Honda Accord

3 Answers

Front end shimmys when applying brakes no loose parts brakes good could possibly be front bearings if so how do you get them out very rusty and bolts in poor shape


The rotors for the brakes are most likely warped,they need resurfacing ,the auto parts store can do this for you.

May 17, 2010 | 1996 Honda Accord

1 Answer

When i step on the brakes i hear a sound fron the


i think the sound you hear do not comes from the engine though it seem like, Your front breaks disc pads are worn out and needs replacement

Aug 04, 2009 | 2001 Honda Accord

1 Answer

1993 Honda Accord car jerks forward when placed drive (D4)


look carefully at the front engine mount and the rear engine mount...the front dogbone looking mount usually crack or break ...ur rear mount may also be broken and or worn...

Apr 11, 2009 | 1993 Honda Accord

3 Answers

Timing belt on Accord 2004 v6 models


2003 and up Honda Accord with 4 cylinder engines do indeed have a chain and the V6 has a belt which must be replaced at 110,000 miles. Why? Ask Honda, they designed the engines.

Apr 08, 2009 | 2004 Honda Accord

4 Answers

1984 Honda Accord Brake Problem


well aside from the boosters you may also want to check the possitioning rotor and calipers. there is a possibility that something slipped, or leaked, check for brake fluids and try to trace where it is comming from.

the picture below shows how to disassemble the brakes of an Accord, the only special tool you will need is a ball joint fork to seperate the upper and lower ball joints. You have to remove the whole steering knuckle assembly to get to the bolts in back of the rotor and hub assembly.

b8487ef.gif
hope this helps

Aug 05, 2008 | 1984 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...