Question about 1999 Ford Crown Victoria

1 Answer

I have 99 crown vic pol interceptor; the passenger side rear wheel has bumping sound when i drive; i took wheel off and saw brake fluid leaking; i cannot determine, how the bumping sound impacts with the sound, as where is the leak likely from in relation to impacting sound. trying to decide how to fix brake leak as pads, and disc good and not sure whether caliper/piston or other part causes leak that would cause bumping sound; what is correlation w/bump and break fluid leak to fix?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 7,772 Answers

Fluid on the pad can cause the pad to stick and then slip--this can cause noise when the pad breaks loose from the disk. fix the leak and clean everything with brake cleaner (or put in new pads)

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 2009 crown vic have a heater control valve if so where is it located


yes its a blender door accuater some are vacuum controlled and some electric, and ther is a heater control valve under hood on passengers side tward fire wall ,its in the heater hose line.

Oct 17, 2014 | Cars & Trucks

1 Answer

Brake fluid is leaking bad at rear passenger side wheel


No. Don't drive it at all. It is not safe. It is most likely the caliper and requires replacement.

Apr 07, 2014 | 1987 Plymouth Gran Fury

1 Answer

Fluid looks like transmission fluid leaking from front passenger side in front of the tire


Check your brake lines sounds like a brake issue is it a 4x4 check your axle seals also.

Feb 15, 2013 | 2004 Dodge Durango

2 Answers

Oil leak in driver side rear wheel well for 2005 crown vic. drips down over top of tire and puddles under it.


Hi Don:
Have you checked to see if it's brake fluid?
Is it possible that the slave cylinder is leaking and the fluid is coming ot from the brakes? I can't think of any oil source in that area.

Jul 21, 2011 | 2005 Ford Crown Victoria

1 Answer

99 crown vic police interceptor steering wheel??


i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!

Jul 07, 2009 | 1999 Ford Crown Victoria

3 Answers

Does the crown vic police intercepter take as much oil as the regular crown vic? (when changing the oil and filter)


I ~think~ the 1999 is the same as the 2000 (mine is a 2000 P71)

The 2000 CVPI (Crown Vic Police Interceptor) owners manual recommends the following:

Engine Oil - Motorcraft SAE 5W-30 Super Premium Motor Oil 5.0 quarts

Transmission Fluid - Motorcraft Mercon V ATF 13.9 quarts (fluids Mercon & Mercon V are NOT INTERCHANGEABLE, DO NOT MIX)

Fuel Tank - 19.0 gallons

Break Fluid - DOT 3


Rear Axle Lubricant - Motorcraft 80W-90 Premium Rear Axle Lubricant 3.75 pints (add 4 oz of Additive Friction Modifier C8AZ-19B546-A or equilavent meeting Ford Spec. EST-M2C118-A for complete refill of Traction-Lok Rear Axles)

Engine Data - 4.6L V8 Engine
Cubic Inches - 281
Required Fuel - 87 Octane
Firing Order - 1-3-7-2-6-5-4-8
Spark Plug Gap - 1.3-1.4 mm (0.052-0.056 inch)
Ignition System - Coil On Plug
Compression Ratio - 10.0:1

I hope this helps!

Jun 27, 2009 | 1999 Ford Crown Victoria

1 Answer

Fluid leak on rear right side near tire.


if it is sure break fluid. then you have to change break master cylinder, if your car rear wheel drive that might be shaft oil and vibration come from a worn rear wheel bearing.

Jan 17, 2009 | 2003 Ford Crown Victoria

1 Answer

Exterior bumping noise at all speeds


could it possibly the exhaust bracket in the back

Oct 03, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...