Question about Nissan Sentra

1 Answer

How do i take the speedcontrol cencor out - Sentra Nissan Cars & Trucks

Posted by on

  • 1 more comment 
  • Zachary Kloefkorn Aug 22, 2010

    Are you talking about how high the speed will go before slowing down or the actual sensor that reads the speed?

  • bunthoffp Aug 22, 2010

    the actual sensor that reads the speed

  • bunthoffp Aug 22, 2010

    how to take out the sensor that reads the speed. thank you

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 156 Answers

Ok thank you for clarifying. this will be located on your transmission towards the back and will have wires going into it of course. There will be one, maybe two screws or bolts that will hold it in. It will not be too big and will be covered by your intake and several other parts that will need to be removed in order to see it. It will be located more towards the enging side for the fact that it runs close to the flywheel. This whould give you a small window to find it and hope that it helps! Once you have it out it should have a gear on the end of it (likely a white plastic gear.)

Posted on Aug 22, 2010

Testimonial: "thank you "

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 4x4 4.3l. Could the fuel pressure regulator cause the fuel pump not to spin?


The fuel pressure regulator has no effect on the pump.
Do you know that the pump is getting power from the relay when you turn the key on ?

Oct 09, 2015 | Chevrolet S 10 Cars & Trucks

2 Answers

Ford Escape 2001 V6-eL auto Problem


check your abs cencors on the calipers make sure both cencor and wires are in tact

Oct 16, 2013 | Cars & Trucks

1 Answer

Engine starts and idle but no power.up to 1500rpm.is it the air flow cencor?


Year make and model ?
If one of the sensors fails the check engine light should come on.

Jul 03, 2012 | Isuzu i-290 Cars & Trucks

1 Answer

First this isuzu dmax just stop suddenly,i clean the fuel filter then clean the cencor in the tank,then the cencor connceted to the pump then it manage to start and idle properly but the engine check


to whom it may concern. my dmax model 2006 3000 cc lately having problem like engine suddenly stop especially when it slow,fuel filter already new fuel line been check but the problem still there.anyone been encountered this problem before what is the problem?

Jul 01, 2012 | Isuzu i-280 Cars & Trucks

1 Answer

My isuzu dmax suddenly stopped.i have open the fuel tank clean the cencor inside the tank,also clean the cencor on the fuel pump and it can now start and idle but know power.is there any other cencor i...


HI i HAVE JUST HAD A SIMULAR PROBLEM WITH MY ISUZU 2.5 D MAX EVEN AFTER CLEANING AND REPLASING THE FUEL FILLTER THE ENGINE WOULD CUT DOWN LIKE THERE WAS NO FUEL GETTING THROUGH. PROBLEM SOLVED MY GARAGE MACHANIC TOLD ME TO REMOVE THE TINY FILTER SITUATED IN THE BANGO BOLT WHICH GOES INTO THE INJECTOR PUMP THIS WAS THE PROBLEM AND MY CAR IS NOW RUNNING LIKE A GOOD ONE . DAVE

Jun 11, 2012 | Cars & Trucks

1 Answer

Engine light comes on, have computer numbers for cencores, but dont know which cencore, numbers are 12343255


The numbers are grouped in twos.
12 Memory standby power lost (this means that you must have disconnected your battery. It will turn off in the next 50 key cycles.
34 Speed control vacuum or vent control solenoid circuits.
32 EGR system
55 end of codes it will always flash 55 informing you that it is finished
Hope this helps give feedback and good luck FixYa

Jan 22, 2011 | 1995 Dodge Dakota

1 Answer

97 intrepid check engine light...


something else
you have to have all of the original system in place for the ECM program to operate properly
removing for convenience is not the way to go as it will throw up codes and upset the economy of the vehicle

Jun 24, 2017 | 1997 Dodge Intrepid

1 Answer

What does code 52 means on the toyota corolla 2000 model in SA.


DTC 52 on a 93 Corolla is a Knock Sensor code. I replace the knock sensor; it is located on the side of the engine block, on the side of the engine that faces the firewall. It is in the center; under the intake manifold.

Thanks for choosing FixYa for assistance.

Mar 09, 2009 | 1993 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...