Question about Ford F-150

1 Answer

Bought a 2003 ford lariat which came with a keyless remote "code alarm/chapman GOH-FOUR". For some reason when we turn the key nothing happens. We contacted the dealer where we bought the vehicle from but to no avail. Hopefully you can help us unlock the ignition. Really don't want to rack up all kinds of charges - please help us. Thank you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 11,800 Answers

That model of alarm has an engine cutoff module : it cuts the power to the ECM if activated. Now it appears that eiter yo can't deactivate it or that the engine module is defective.
That alarm is custom one, it didn't came with the truck from factory. As such only the person who installed it know it wiring so the dealer really can't help you here. 
The easiest and fastest option is to remove this defective system and install a new one - a job that any shop can do it. It will be best if the shop is one specialized in security systems.

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset keyless door entry that is in lock out mode


Viper Keyless Entry Systems

https://www.viper.com/car/keylessentry/
Viper is the industry leader in keyless entry systems. Add the convenience of keylessentry to virtually any vehicle - even vehicles without power door locks!

Alarms, Remote Car Starters, Keyless Entry & Locks - JC ...

www.jcwhitney.com > Audio, Video & Electronics
20 out of 32 products in Alarms, Remote Car Starters, Keyless Entry & Locks ..... ofKeyless Entry & Car Alarms allow you to lock and unlock power door locks.
How to program your keyless entry keypad - Ford Ownerhttps://owner.ford.com/.../locks.../how-to-program...Ford Motor CompanyDiscover how to lock and unlock your doors and how to program memory settings that will adjust seats & mirrors for each driver.SecuriCode™ Keyless Entry Keypad - Ford Ownerowner.ford.com/.../locks.../securicode-keyless-entr...Ford Motor CompanyLearn how to set a 5 digit SecuriCode on the Ford keyless entry keypad. ... Sign out. Register/Sign In · Your Vehicle. Service & Maintenance. Service & .... vehicle's SecuriCode keypad to lock and unlock your doors without having to use a key. ... Thekeypad will go into an anti-scan mode if you enter the wrong code seven ...How Programming Your Keyless Entry Can Make ... - Ford Life

Jan 08, 2016 | Cars & Trucks

1 Answer

I bought a ford pick up truck that came with a security alarm and a ungo remote control, I would like to know if this remote is keyless entry , so far I've been able to make it work only to turn the a


You can reset Your system by turning Your Key on and off several times and you should hear the doors lock and unlock.. you will need to this really fast/ On and Off and On and Off and On and Off . Then You should be able to set Your remote control numbers it will be a 4 digit code.. give it a try..

Dec 27, 2014 | Ford Cars & Trucks

1 Answer

In the earlier question the car is a ford f150 2005 lariat, the keyless remote is brand new, I've tried programming it with the switch thing 8 times in ten seconds but when I take off the key the freaking...


i'd take to a ford dealer as they will have the correct diagnostic equipment for this , it will probably cost a few dollars but will save you getting stressed and get the job done

May 09, 2014 | Cars & Trucks

1 Answer

My boyfriend bought a 1996 ford explorer, from a friend who is now passed away. Every now & then the alarm goes off but he does not have a remote for the alarm or the code for the keyless entry on the...


The security computer box is in the cargo area open the rear hatch on the driverside behind the plastic is the box, it will have the keyless entry code printed on the side.

Jan 18, 2011 | 1996 Ford Explorer

1 Answer

Program a new fob to my 2002 f150 supercrew lariat 5.4L remote lock/start system


if it is a ford remote or ford factory alarm remote cycle the key from off to run(usually 8 times) untill you hear door locks activate. at this exact time key needs to be in the on position.touch unlock or lock on all remotes being programmed and make sure door locks respond to remotes. then turn key off ending programming mode.then try your fobs they should work

Nov 06, 2009 | 2002 Ford F150 Regular Cab

1 Answer

Suzuki 2003 - Keyless Entry not working, alarm goes off with key


Unfortunately, the keyless entry remotes and OE systems usually require a dealership to service them. Sounds to me like they need to re-set the alarm

Apr 13, 2009 | 2003 Suzuki Aerio

1 Answer

Alarm goes off when key open the door


Dealer is correct that you have too replace the bcm, so i would tell you to call junk yard and get one. Cheap $ 50.00 put it in by yourself. Right hand side of the glove compartment. behind the fuse box with couple connectors on it, or have some person with knowledge to do it.

Apr 02, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

Key Pad Entry does not work


does the key pad light when you press a button at night? If yes, the fuse is ok.
Do you have the plastic card with the permanent code in your owner manual packet? If yes, tryit.
report back.

Keyless Entry The keyless entry keypad is hardwired to the GEM. The GEM interprets the inputs from the keyless entry keypad and then controls the associated operation. The keyless entry keypad will be illuminated for five seconds when any button is pressed. Additionally, it will request the illuminated entry feature to turn the courtesy lamps on. If a lock all doors code is entered, the illumination will turn off, as well as request the illuminated entry feature to turn off the courtesy lamps. When pressed, the keyless entry keypad supplies the ground signal to the GEM or the GEM receives a signal from the keyless entry remote transmitter. Then the GEM outputs a ground signal to the appropriate lock or unlock relay which supplies the power to the actuator to lock or unlocks all doors, including the luggage compartment. The keyless entry remote transmitter also unlocks the liftgate or activates the panic alarm by sending a signal to the GEM.
--------------------------------------------------------------- Visual Inspection Chart Mechanical Electrical
  • Keyless entry keypad
  • Keyless entry remote transmitter
  • Central junction box (CJB) Fuse F222 (20A)
  • Circuitry
  • Generic electronic module (GEM)
------------------------------------------------------------------------
  • No communication with generic electronic module (GEM)
  • Generic electronic module.
  • Circuitry.
  • REFER to Section 419-10 .
------------------------------------------------------------------------------------

Mar 08, 2009 | 2003 Ford Taurus

3 Answers

2003 Tiburon GT Remote Key


Seriously don't use the factory alarm system / keyless entry.

While my car was under warranty, the alarm malfunctioned and it wouldn't disarm. The solution was to have the car towed to a dealership and install a new BCM. This would have cost me over $1,000 - and it's not an isolated case.

Don't get a Hyundai key fob. Have an after market alarm / keyless entry installed. It will be cheaper & easier.

Jan 06, 2009 | 2003 Hyundai Tiburon

6 Answers

Keyless entry stopped working on 05 cobalt now i have to unlock door with the key and when i do that the alarm goes off. Help


Lock all the doors from the inside (with all the doors closed), unlock your driver's door by manually lifting the lock, then press it back down after you are out - this will prevent the alarm from sounding when you use the key to unlock the door.

Aug 02, 2008 | 2007 Chevrolet Cobalt Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...