Question about Ford Fairmont
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
YOU will need the car on a hoist, doing it on the ground is almost impossiable, disconnect the filler neck at top, remove the straps, lower tank slow and disconnect wiring and fuel hoses, you need a special tool to remove the gas line retainer clips.
Posted on Jul 28, 2008
SOURCE: 1993 eb ford falcon
had same prob.
Remedy, spray lots of crc into and onto terminals on sender unit, blow off with air hose, see what happens,moisture and build up of dirt creates a bad earth.
Posted on Sep 28, 2008
I think the word carburetor and ford falcon was mentioned which used a mechanical fuel supplied system. check for a cracked fuel supply line from the fuel tank to the steel body supply line.
Posted on May 10, 2009
SOURCE: replace fuel pump
Fuel injection motors have in the tank fuel pump and screen .Access from under back seat,fold forward and move carpet forward after popping out plastic carpet retainer plugs.move floor plate,phillips screwdriver ,no need to unplug electric.remove gas hose,tuck forward out of way.unplug electric plug and remove screws from top of tank and gently pull up and tilt toward gas tank filler so that the gas gauge float and rod is not ruined.the plastic pickup screen will need to be folded to get out of tank.removing the float controll with small nuts is a good idea. the pump has a screw in the bottom that probably needs a vise grip if the phillips head rounds out. everthing is slip apart from this point.pay attention to plastic over the intake nipple and rubber o ring and piece up in the intake line.ebay has reasonable pumps.look at pictures and see the screen and plastic parts that you may need.the rubber on bottom of pump may need to be trimmed because of groove channel may have metal insert in your new pump. unless new one is with new pump.kind of tricky to put back together.but is do able .
Posted on Aug 29, 2009
YOU carnt have a transmission oil leak from the front axle on a Falcon as they are Rear wheel drive but could be the hose going to the radiator over the front end leaking But the rear end of G/Box should be only the OIL SEAL.
Posted on Sep 19, 2009
Tips for a great answer:
Feb 26, 2016 | 2005 Ford Falcon
May 20, 2014 | Ford Falcon Cars & Trucks
Nov 28, 2012 | Cars & Trucks
Apr 25, 2010 | 1994 Ford Econoline
Dec 20, 2009 | 2000 Ford Expedition
Sep 19, 2009 | Ford F Cars & Trucks
Nov 10, 2008 | Ford E-Series Cars & Trucks
Sep 08, 2008 | 1983 Ford Fairmont
Oct 22, 2017 | Ford Cars & Trucks
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: