Question about Saturn SC

Open Question

Is crankshaft bolt reverse thread for 1999 Saturn LLO

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6982 Answers

SOURCE: how to remove the crankshaft harmonic balancer on

National fine thread, regular right hand. You may need a puller to remove damper after removing bolt.

Posted on Mar 23, 2009

alicantecoli
  • 22095 Answers

SOURCE: crankshaft pulley

no it doesnt,to undo fit a appropiate socket and using a big knuckle bar wedged in suspension turn starter motor to undoo the bolt

Posted on Dec 14, 2008

SOURCE: 97 neon speedometer guage and crankshaft threads

pls take your car to the nearest service center, check the speedometer cable installed..it should have either been destroyed or it should have a loose contact..for second problem ask the service personnel to check the connections are tight enough with preferred torque

Posted on May 22, 2009

  • 102 Answers

SOURCE: does the crankshaft pulley bolt have reversed

No, standard thread. Turn anticlockwise to undo. That bolt will be VERY tight, and make sure it is done up VERY tight when you put it back together. I recommend a drop of thread lock to avoid it coming loose later on. This bolt doesn't need to be removed to change the timing belt, but it does if you want to change the front crank seal.

Posted on Oct 07, 2009

  • 14036 Answers

SOURCE: removal of bolt on front of crank shaft to replace

you need a chain or strap wrench to hold crankshaft drive sprocket to loosen crankshaft bolt.

Posted on Jan 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace a water pump on a 1995 Saturn


1) Drain coolant
2) Raise and support vehicle
3) Remove the passenger side wheel and inner splash guard
4) Remove A/C compressor attaching bolts and position aside
5) Place a 1" wood block between the crankshaft and water pump pulley and remove water pump bolts and allow pulley to hang on pump hub
6) Remove water pump attaching bolts, then remove water pump and discard gasket
7) Reverse procedure to install

Jul 18, 2010 | 1995 Saturn Sl

1 Answer

Install a water pump on 1995 Saturn


1) Drain coolant
2) Raise and support vehicle
3) Remove the passenger side wheel and inner splash guard
4) Remove A/C compressor attaching bolts and position aside
5) Place a 1" wood block between the crankshaft and water pump pulley and remove water pump bolts and allow pulley to hang on pump hub
6) Remove water pump attaching bolts, then remove water pump and discard gasket
7) Reverse procedure to install

Jul 18, 2010 | 1993 Saturn SL1

1 Answer

Need a diagram to replace the crank pulley on a 1990 Oldsmobile regency 98 3.8 liter


This is what I found on the 98 Regency instructions: Crankshaft Damper REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Remove the belts from the crankshaft pulley.
  3. Remove the crankshaft damper attaching bolt.
  4. Attach a suitable puller to the damper and remove the damper from the crankshaft. NOTE: On certain models, removal of the cooling fan, fan shroud or radiator may be necessary for clearance. WARNING
    DO NOT pry on the damper assembly to remove it from the vehicle or component damage will result. Remove the damper using a puller only.
  5. Installation is the reverse of removal. Torque the damper bolt to specification. Fig. 1: One example of a crankshaft damper puller tool 85843074.gif
    Fig. 2: Removing the crankshaft damper bolt 85843193.jpg Fig. 3: Do not attempt to pry on the damper to remove it from the crankshaft, use a puller only 85843194.jpg Fig. 4: Removing the damper from the crankshaft 85843195.jpg Fig. 5: When installing the damper, thread the bolt by hand first to prevent cross-threading 85843196.jpg prev.gif next.gif

Jul 04, 2010 | 1990 Oldsmobile Ninety Eight

1 Answer

2002 Saturn SL2 crankshaft bolt removal - right or left handed threads?


Look at rotation of harmonic balencer to remove bolt is in opposite direction.To remove bolt :Disconnect coil wire or wires so car will not start Next put socket on bolt with breaker bar and wedge bar some where solid on car. Bump motor with starter the small r turning of the starter will loosen bolt

Jan 22, 2010 | 2002 Saturn Sl

1 Answer

Removal of bolt on front of crank shaft to replace crankshaft seal.also is that a reverse thread on that bolt?


you need a chain or strap wrench to hold crankshaft drive sprocket to loosen crankshaft bolt.

Jan 04, 2010 | 1997 Volkswagen Jetta

2 Answers

How do you stop the cranckshaft from turning when trying to replace crankshaft pulley on a 1999 taurus v-6


Impact gun would be the best way to remove it, you could also get a breaker bar with the right size socket rest the breaker bar on the driver side frame, bump engine, should work I do that some time's

Dec 07, 2009 | 1999 Ford Taurus

1 Answer

Does the crankshaft pulley bolt have reversed threads on a 1994 suzuki sidekick


No, standard thread. Turn anticlockwise to undo. That bolt will be VERY tight, and make sure it is done up VERY tight when you put it back together. I recommend a drop of thread lock to avoid it coming loose later on. This bolt doesn't need to be removed to change the timing belt, but it does if you want to change the front crank seal.

Oct 03, 2009 | 1994 Suzuki Sidekick

1 Answer

Aligning the starter ring to crankshaft on sc2


They are self aligning. Install the starter with the 2, 15mm bolts. and connect the wires. No shims no aligning.

Oct 14, 2008 | 1999 Saturn SC

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...