Question about Ford Escape

1 Answer

I have 2004 ford escape with V 6 engine 2 engine codes p2195 & p2197 it running ok but I don't know if this is a O2 sensor and if it is where would they be on the truck

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

P2195
02 sensor signal stuck lean bank 1, sensor 1
p2197
o2 sensor signal stuck lean bank 2, sensor1

i beleave this will be the sensor before the catalytic converter

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

1 Answer

Changed both o2 sensors still rough idle and codes p2195 and p2197 still there


P2195 & 97 is a lean condition reported by both O2
on right side

The pcm drove the fuel trim lean to correct for a over
rich condition on right bank only due to a leaking fuel
injector most likely

That is a common problem on an expedition with 5.4

I have seen people find & replace the bad injector
I would mail all of them away to be ultra-sonicly cleaned
& flow tested if it were mine

If you have a professional scan tool or software you woulod
see the issue on fuel trim.

The MAF is common to both banks & you only have an issue
on the right side so the MAF is okey

Your plugs should give some indication of the bad injector
if that is the case

Need details on brakes!!

Jan 17, 2013 | 2004 Ford Expedition

1 Answer

I got a P2198 & P2197 code for my 2006 Ford Escape


first check the fuses they are heated o2 sensor codes if the heater fuse blows the codes will turn on as can a bad sensor

Aug 15, 2012 | Ford Cars & Trucks

1 Answer

2004 ford freestar van idles rough


For rough idle and error code issues on your ford freestar.Click the link below:----
http://howtobyme.blogspot.in/2012/01/2004-ford-freestar-van-idles-rough.html
--------This will help.Thanks.

Jan 31, 2012 | 2004 Ford Freestar

1 Answer

I'm getting codes with obd II read for o2 sensor 1 bank 1 and sensor 1 bank 2 i have a rough running 2004 ford escape 3.0 V6


If the O2 Sensors are original,you could just change the front 2

The ones closest to the engine.

Any other issue you need to actually diagnose, as codes
are for just that reason

They don't ever tell you to replace anything

Running rough is more the O2 Sensors

Plugs
MAF Dirty
Vacuum Leaks
Ignition Coils going bad

May 31, 2011 | Ford Escape Cars & Trucks

1 Answer

P2195 and p2197 are the 2 codes that pop up what are they and what do i need to change? mazdz mpv 2005 3.0 li


P2195 and P2197 means that the O2 sensors on each bank are seeing WAY too much oxygen in the exhaust gas. In normal operation the signal from the O2 sensors should swing back and forth between rich and lean... Your sensors are locked on lean. Replace both O2 sensor.

Hope helps (remember rated this).

Jul 22, 2010 | 2005 Mazda MPV

2 Answers

4 codes P0171,P0174,P2195,P2197


Hi
171 system too lean
174 system too lean
2195 - 02 ozygen sensor signal stuck lean Bank1 Sensor 1
2197- 02 ozygen sensor signal stuck lean Bank 2
Sensor 1
The 2 front 02 sensors are located on the front of
the exhaust manifold.
Should solve problem and increase gas mileage.

Apr 01, 2009 | 2003 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...